External Tool Tag - User Manual (US/CA) Product Management Exported on 09/22/2022
Product Management – External Tool Tag - User Manual (US/CA) Table of Contents 1 KINEXON External Tool Tag ...................................................................................4 2 SPECIFICATIONS ....................................................................................................6 2.1 Mechanical Drawing.....................................................................................................................6 2.2 Label .............................................
Product Management – External Tool Tag - User Manual (US/CA) THE KINEXON External Tool Tag – 3
Product Management – External Tool Tag - User Manual (US/CA) 1 KINEXON External Tool Tag Real-time localization with high update rates and long battery lifetime. The KINEXON External Tool Tag is the perfect sensor for indoor localization in industrial and logistics environments. By mounting or embedding the tag on the object, it enables a precise and robust localization of all assets on the shop floor.
Product Management – External Tool Tag - User Manual (US/CA) Physical Specifications Battery Internal non-replaceable Li primary battery Battery Lifetime Up to 3 years (highly dependent on configuration) Material Weight 200 g Dimensions 85 x 56 x 44 mm Environmental Specifications Operating Temperature -20°C to 60°C incl. battery Storage Temperature -20 °C to + 30 °C incl.
Product Management – External Tool Tag - User Manual (US/CA) 2 SPECIFICATIONS 2.
Product Management – External Tool Tag - User Manual (US/CA) 2.2 Label 2.2.1 Label back plate QR code Company logo EUI Device part-no. Certification logos/signs Size: (23x 55) mm 2.2.2 Label top cover Company logo EUI QR code Size: (20 x 25) mm 2.3 External interfaces 2.3.1 Wireless connection For wireless connection a Ultra-Wideband (UWB) interface according to IEEE 802.15.4 is implemented.
Product Management – External Tool Tag - User Manual (US/CA) 2.3.2 Tag LED Please mind that tag LED behavior depends on the firmware use case one has selected. Most important versions are: Power-on Reset Color Duration Explanation yellow Constant, ~1s Standstill (sleep) mode - The LED is blinking every 30 seconds for approximately 1s. yellow Constant, ~1s Active mode (X-Tag in movement) - The LED is blinking every 1 second for approximately 1s.
Product Management – External Tool Tag - User Manual (US/CA) 3 Regulatory and Legal Information The Kinexon Worker Tag has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations, section 15.250 and with the European Union ETSI EN 302 065 standards. 3.1 Disclaimer The information in this document is subject to change without notice.
Product Management – External Tool Tag - User Manual (US/CA) 3.5 ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device.
