FEATURES APPS {Android / iOS} Dual Band Technology Compatible with apps that Connects to smartphones support Bluetooth and and bike computers via ANT+, ANT+ and Bluetooth. Compatible with iPhone 45 Wireless Connection or later, and with select Tirelessly tracks speed or Android devices using cadence. Easy installation, Android 4.4 or later and no magnet required. Bluetooth. Accurate Measurement Provides accurate speed or cadence data.
1 Twist the battery cover counter-clockwise to OPEN ta remove the cover. 2 Place the battery (CR 2032) into the cover with positive side facing the inside of the battery cover. Make sure the O-ting Is In the groove of the battery cover.
3 To replace the battery cover, aligned the cover dot with 4& Press and twist the cover clockwise back Into place (the cover dat points to “ 0°). 5 Check the battery back cover is indeed locked to ensure water resistance.
Used As A Cadence Sensor Claps the sensor on the rubber pad with logo facing up. Mount on non-drive side, inside of crank am. 2 Pull the crank rubber ring around the crank arm, and attach It to the hooks on both tildes of the sensor. 3 Rotate the crank arm for detection, The sensor should het touch any part of your shoe or bike and must stay firmly attached.
Used As A Speed Sensor 1 Select the smallest size hub ube ring that securely fits your ub. 2 Place the sensor on the rubber pad with logo facing up. Hold them on top of the hub. 3 Pull the hub rubber ring around the hub. and attach it to the hooks on both sides of the sensor. 4% Rotate the wheel for detection. the sensor should not move and touch other parts of your bike.
Notes Waking Up Sensor 1 Rotate for 5 seconds or mots, the sensor's LED will flash to let you know that fts woken up. 2 The LED will flash RED when configured for cadence. 3 The LED will flash GREEN when configured for speed. & The LED automatically tums off to save battery power.
Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: + This device may not cause harmful Interference. + This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tests and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission {FCC} rules.
not Installed and used In accordance with the Instructions. may cause harmful interference to radio communications. However, there ls no guarantee that interference will not occur in a particular Installation. If this equipment causes harmful Interference to radio or television reception, which can be determined by muting the equipment off and an, tha user is encouraged to try to correct the interference by doing one or more of the fol lowing measures: + Reorient or relocate the receiving antenna.
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power ls so lew that no RF exposure calculation Is needed, NOTE: The manufacturer Is not responsible for ary radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment.
Kinetic Sports Technologies Limited R14, 29F, Ho King Commercial Center, 2-16 Fa Yuan Street, Kowloon, Hong Kong