Integration Guide

K-C Confidential

Module Integration Guide and Regulatory

Compliance Addendum PAN

The following guidance is mandatory when integrating the radio module with the following

identifications

FCC: 2AQVA-ONVAPAN51915

IC: 24318-ONVPAN52915

1. This radio module is certified under limited modular approval. It is designed for integration with

host products of the grantee of the module only. It must be integrated in a way maintaining a

separation distance between the antenna in the module to all metallic housings or other PCBs of

at least 1 cm.

2. It may only be combined with other radios in a host when following current FCC guidance for

integration of multiple radios.

3. Each individual host product that is integrating the above module must be marked with

“Contains FCC ID: 2AQVA-ONVAPAN51915: and “Contains IC: 24318-ONVPAN52915“

4. Changes or modifications not expressly approved Kimberly Clark could void the user’s authority

to operate the equipment.

5. Each individual host product that integrates the module still requires SDOC (supplier declaration

of conformity) for the unintentional emissions to part 15B and ICES-003.

PAGE 1
Module Integration Guide and Regulatory Compliance Addendum PAN The following guidance is mandatory when integrating the radio module with the following identifications FCC: 2AQVA-ONVAPAN51915 IC: 24318-ONVPAN52915 1. This radio module is certified under limited modular approval. It is designed for integration with host products of the grantee of the module only.
PAGE 2
6. Each individual host product that integrates the module shall be marked with the following statements or contain these statements in the manual if this is not practicable This device complies with Industry Canada license-exempt RSS 210. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.