TDS
TECHNICAL DATA SHEET
This information is provided “as is” and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a technical service representative,
call 1-877-KILZ-PRO. ©2019 Masterchem Industries LLC, 3135 Old Hwy M, Imperial, MO 63052-2834.
††
GREENGUARD is a registered trademark of UL Company
Revised 03/2019
1 of 2
HEAVY-DUTY HIGH HIDE SEALER & STAIN BLOCKER
NO. 1300
PRODUCT INFORMATION
KILZ® PREMIUM primer is a superior quality, fast drying, low odor, very low VOC, water-based primer-sealer-stainblocker.
It has excellent adhesion and provides a mildew resistant coating making it ideal for use in moisture-prone areas.
KILZ PREMIUM primer blocks most medium to heavy stains caused by water, tannin, ink, pencil, felt marker and grease.
Its thicker high hiding formula hides surface imperfections and prepares the surface better for painting. Works with oil
and water-based paints. Not recommended for oors.
RECOMMENDED USES:
Use on properly prepared interior and exterior surfaces, such as :
• Wood • Stucco • Concrete • Painted Metal
• Drywall • Brick • Paneling • Properly Prepared Glossy Surfaces
• Plaster • Masonry • Cement Board Siding
PRODUCT SPECIFICATIONS:
Tint Bases/Max Tint Load:
No. 1300 128 oz. / 2 oz.
Resin Type: Acrylic Polymer
Weight per Gallon: 10.9 lbs.
% Solids by Volume: 43%
% Solids by Weight: 56%
VOC: <5 g/L excluding colorant
Flash Point: N/A
Viscosity: 95 - 105 KU
Recommended Film Thickness:
Wet: 5.3 mils / Dry: 2.3 mils @ 300 Sq. Ft./Gal.
Wet: 4.0 mils / Dry: 1.7 mils @ 400 Sq. Ft./Gal.
Coverage: 300 - 400 Sq. Ft./Gal. depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
Brush: Nylon / Polyester Blend
Roller: 3/8" - 3/4" nap
Airless Spray: Fluid pressure of 1,800 - 3,000 psi
Tip: .015" - .021"
Filter: 60 mesh
Thinning: Not recommended. Product is formulated for use
at package consistency only.
Dry Time: @ 77°F, 50% RH
Longer dry time required in cooler temperatures and in
higher humidity.
To Touch: 30 minutes
To Paint: 1 hour
SURFACE PREPARATION:
The surface must be clean, free of dust, grease, wax, peeling
paint, mold, mildew and wallpaper paste. If washing is
necessary, use a non-soapy detergent or a TSP substitute.
Rinse well and allow to dry.
Peeling or Checked Paint: Scrape o loose paint and sand
to a smooth surface. Sanding or removal of paint containing
lead is hazardous. Unpainted, exterior wood exposed to sun
and/or moisture longer than 2-4 weeks must be cleaned and
sanded before priming.
*
Glossy Surfaces: For maximum adhesion, scu sand the
surface thoroughly before priming.
*
Masonry, Brick, Stucco and Plaster: KILZ PREMIUM
Interior/Exterior Water-Based Primer may be used on
clean, dry, aged masonry surfaces. New masonry must
be allowed to cure (dry) at least 30 days before applying
KILZ PREMIUM Interior/Exterior Water-Based Primer.
Fire Restoration: It is critical to clean smoke
damaged surfaces thoroughly before priming. Primary
Recommendation: KILZ RESTORATION™ for water-based
primer; KILZ® ORIGINAL and KILZ ORIGINAL INTERIOR/
EXTERIOR for oil-based primer.
*
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. Contact the National
Lead Information Center at 1-800-424-LEAD or visit
www.epa.gov/lead.
TEST SPECIFICATIONS:
Flexibility
ASTM D522 - Pass
Biological Growth
ASTM D3274 - Pass
CLEAN UP:
Clean all tools and equipment with clean water. For disposal
of empty containers and unused product, contact your
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Protect from freezing.
• For best results, apply at temperatures between 45°F -
90°F. Temperatures above 90°F may aect the application
such as drying too fast. Avoid painting in direct sun.
• Shelf life under normal conditions is 2 years unopened.
• Not for use on oors.
GENERAL INFORMATION:
CAUTION IRRITANT Avoid contact with eyes. May cause
eye, nose and throat irritation. Avoid breathing of dust,
vapors or spray mist. Open windows and doors or use
other means to ensure fresh air entry during application
and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/ mist
levels are above applicable limits, wear an appropriate,
properly tted respirator (NIOSH / MSHA TC -23C
or equivalent) during and after application. Follow
respirator manufacturer’s directions for respirator use.
Close container after each use. Wash thoroughly after
handling and before smoking or eating.
FIRST AID: If swallowed, do not induce vomiting.
Get medical attention immediately. If you experience
diculty in breathing, leave the area to obtain fresh
air. If continued diculty is experienced, get medical
COMPLIES WITH THE BELOW AS OF 1/1/2019
SCAQMD YES LEED v.3 (2009)
†
YES
CARB YES LEED v.4
†
YES
OTC YES MPI 6, 39
LADCO YES GREENGUARD
† †
YES
AIM YES CHPS YES
†
Please visit www.usgbc.org/LEED for additional details.
WARNING
Cancer and Reproductive Harm– www.P65Warnings.ca.gov