Instruction Manual

ManualsBrandsKidztech Toys ManualsElectronics1/6 R/C Ducati Rider

Battery Installation

Vehicle

Contents

RC Vehicle x 1RC Transmitter x 1

Fig. 3

Transmitter

Steering

Wheel

2.4 GHz

Signal Match

Button

Accelerator

Trigger

Transmitter - Battery Installation

Fig. 4

Fig. 1

5 x AA

For Vehicle

(Not Included)

2 x AAA

For Transmitter

(Not Included)

Vehicle

Fig. 2

OFF

NO.: 84471

PRO. SYSTEM

- RC Vehicle (Vehicle) x 1

- RC Transmitter (Transmitter) x1

- Instruction Manual x 1

1. Alkaline batteries are recommend to be used

2. Only batteries of the sme or equivalent type as recommended are to be used

3. Do not mix alkaline, standard or rechargeable batteries

4. Do not mix old and new batteries or different type of batteries

5. Non-rechargeable batteries are not to be charged

6. If rechargeable batteries are to be used, they are only to be charged under adult supervision

7. Rechargeable batteries are to be removed from the product before they are charged

8. Be Sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions

9. Remove all batteries from the Vehicle and Transmitter when not in use

10. Exhausted batteries are to be removed from the product

11. The supply terminals are not to be short-circuited

12. Dispose of batteries properly / Do not dispose the batteries in fire - it may cause them to exploade or leak causing injury or damage

13. Battery installation and removal must only be done by adult

For Vehicle (Fig. 1 and Fig. 2)

1. Switch OFF the power

2. Unscrew the screw on the battery cover

3. Open the battery cover

4. Install 5 new 1.5V”AA” batteries with correct polarities (+/-)

5. Close the battery cover

6. Tighten the screw on the battery cover

For Transmitter (Fig. 3 and Fig. 4)

1. Unscrew the screw on the battery cover

2. Open the battery cover

3. Install 2 new 1.5V “AAA” batteries with correct polarities (+/-)

as shown inside the battery compartment

4. Close the battery cover

5. Tighten the screw on the battery cover

FULL

FUNCTION

1:6

SCALE

WORKING

SUSPENSIONS

age

HEAD

LIGHTS

Summary of content (2 pages)

PAGE 1
NO.: 84471 1:6 SCALE WORKING FULL FUNCTION SUSPENSIONS HEAD LIGHTS PRO. SYSTEM Contents 6 age 5 x AA For Vehicle (Not Included) - RC Vehicle (Vehicle) x 1 - RC Transmitter (Transmitter) x1 20 - Instruction Manual x 1 2 x AAA For Transmitter (Not Included) RC Transmitter x 1 RC Vehicle x 1 1. Alkaline batteries are recommend to be used 2. Only batteries of the sme or equivalent type as recommended are to be used 3. Do not mix alkaline, standard or rechargeable batteries 4.
PAGE 2
How To Bind 84471 1. Turn on the Vehicle. 2. Hold the Signal Match Button for around 4 second then the Transmitter signal light will flash for 6-7 second. 3. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing. 4. If it cannot complete within 8 seconds, please turn off the Vehicle and re-start the binding process. 5.