Instruction Manual

Batteries should not be disposed of in the household waste. As the consumer you are legally obliged
to return batteries containing harmful substances and all other used batteries. You can hand in your
old batteries at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries
containing harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
Fig. 1
Battery Installation
For Vehicle (Fig. 1, 2 and Fig. 3)
Vehicle
Fig. 2
2.4 GHz Transmitter
Transmitter - Battery Installation
Fig. 3
Direction Adjustment
FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-210 Compliance Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 2014/53/EU.
Environmental notes:
Disposal of batteries
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Conforms to the safety requirements of ASTM F963
Frequency band : 2405 - 2475 MHz
Maximum radio frequency power transmitted : <0 dBm
No.#84154 / 84155
6
KIDZTECH TOYS MANUFACTURING LTD.
Room 802, 8/F, Inter-Continental Plaza,
94 Granville Road, TST East, Hong Kong.
Tel: [phone] [e-mail]
Made in China http://www.kidztech.net
US OFFICE:
1540 Forest Avenue,
River Forest, IL 60305, USA
Tel: [phone] Fax: [phone]
KT-BB-26/07/2019-EN
ON/OFF
Battery
Compartment
+
+
+
+
1.5V
AA
1. Turn OFF the Vehicle and then install the batteries into the Vehicle and Transmitter.
2. Do not touch the wheels and turn ON the Vehicle. When the wheels run automatically, the pairing process completed and it is ready for playing.
3. As long as the batteries in both Vehicle and Transmitter are not removed, it is no need for pairing process after switching OFF the Vehicle. Just switch ON the Vehicle
and it will still be paired up with the Transmitter.
4. If the pairing process is not completed, please remove the batteries from the Vehicle and Transmitter and re-start the process. (Step# 1)
How To Play
How To Bind
- Controls Forward /
Reverse speed on
right side of wheels
- Controls Forward /
Reverse speed on
left side of wheels
1. Ensure that the ON/OFF Switches on the Vehicle and the
Transmitter are at the ON position.
2. Control the LEFT and RIGHT Sticks on the Transmitter for
movement. (Fig.5)
3. The Play time is around 35 mins. Please drive the Vehicle back
before battery exhausted.
4.
The optimum control range is up to 20m (65 ft) outdoor.
5. Play on the clear water.
Transmitter
Backward
Forward & Right Turn
Reverse & Right Turn
Forward & Left Turn
Reverse & Left Turn
Fig. 5
The packaging and instruction manual contain important information. Please keep them
for future reference.
Warning! Choking Hazard. Not suitable for children under the age of 3 years due to
small parts.
We reserve the right to improve/amend specifications and colors without notice.
Performance Tips
1. Do not drive on grass, dirt, sand, dusts or carpet.
2. Do not drive in windy or rainy weather.
3. Avoid direct impact the Vehicle with obstacles.
4. Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter
due to leakage of electrolyte from batteries.
5. Remove all batteries from the Vehicle and Transmitter when not in use for long period.
6. Keep fingers, hair and loose clothing away from wheels.
7. The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or Vehicle
b) Interference from other items that emit radio frequency signals.
8. Outdoor usage is recommended in order to get optimum control range.
9. Recommend to play the vehicle on a clean and smooth surface.
10. Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries
Cautions
1. Do not attempt to disassemble the Vehicle or Transmitter
2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the
battery compartment
3. Remove the package and take out all accessories before giving the Vehicle and
Transmitter to child to play
Battery Precaution
1. Alkaline batteries are recommended to be used
2. Only batteries of the same or equivalent type as recommended are to be used
3. Do not mix alkaline, standard or rechargeable batteries
4. Do not mix old and new batteries or different type of batteries
5. Non-rechargeable batteries are not to be charged
6. If rechargeable batteries are to be used, they are only to be charged under adult supervision
7. Rechargeable batteries are to be removed from the product before they are charged
8. Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions
9. Remove all batteries from the Vehicle and Transmitter when not in use
10. Exhausted batteries are to be removed from the product
11. The supply terminals are not to be short-circuited
12. Dispose of batteries properly. Do not dispose the batteries in fire - it may cause them to explode or leak causing injury or damage
13. Battery installation and removal must only be done by adult
1. Switch OFF the power
2. Turn the lock on the battery cover to the
vertical position
3. Unscrew the screws on the battery cover
4. Open the battery cover
5. Install 4 new 1.5V “AA” batteries with correct
polarities (+/-) as shown inside the battery
compartment
6. Close the battery cover
7. Tighten the screws on the battery cover
8. Turn the lock back to the horizontal position
Contents
RC Vehicle x 1
RC Transmitter x 1
20M / 65FT
RANGE
-RC Vehicle (Vehicle) x 1
-RC Transmitter (Transmitter ) x 1
-Instruction Manual x 1
2 X AAA
For Transmitter
(Not Included)
4 X AA
For Vehicle
(Not Included)
LED Battery
Indicator
Control Sticks
Lock