Installation Instruction

NO. 84058

2 x AA Batteries

For Transmitter

(Not Included)

Transmitter: 2 X “1.5V AA” Batteries (not included)

Battery Installation

Instruction Manual x 1

1. Unscrew the screw on the battery cover.

2. Open the battery cover.

3. Install 2 new AA batteries with correct polarity (+/-) as shown

inside the battery compartment.

4. Close the battery cover.

5. Tighten the screw on the battery cover.

ON / OFF

PAGE 1
NO. 84058 Transmitter: 2 X “1.5V AA” Batteries (not included) 2 x AA Batteries For Transmitter (Not Included) Instruction Manual x 1 Battery Installation 1. 2. 3. 4. 5. ON / OFF Unscrew the screw on the battery cover. Open the battery cover. Install 2 new AA batteries with correct polarity (+/-) as shown inside the battery compartment. Close the battery cover. Tighten the screw on the battery cover.
PAGE 2
How To Bind 1. 2. 3. 4. 5. 6. 1. 2. 3. 4. 5. 6. 7. Turn on the Vehicle. Install batteries in the Transmitter then the Transmitter signal light will flash for a few seconds. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing. If it cannot complete within 8 seconds, please turn off the Vehicle and re-start the binding process.