KMC MEDIA CENTER Owner’s Manual KMC50 KMC MULTI-MEDIA RECEIVER WITH USB, BLUETOOTH and AUX Input.
KMC50 Owner’s Manual Media Center Multi-Media Receiver w/ USB, Bluetooth and AUX Input FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide more reasonable protection against harmful interference in a residential installation.
en 3” Hole Cutout KMC50 Installation Overview 1 2 3 4 5 6 7 8 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 3.5” 5.
OPERATION The button layout below will give you a quick overview of the button functionality. KMC50 Settings MENU To enter the Settings Menu : Hold the MENU (3) button for 2 seconds. BUTTONS: 1 - Source 2 - Favorites 3 - Menu 4 - Sub/Zone 2 5 - Seek/Tune Down 6 - Play/Pause 7 - Seek/Tune Up 8 - Volume Knob Press the Menu (3) button to scroll between menu items and rotate the knob (7) to adjust the Menu setting. 1 Available Settings are: Beep: Turns the audible key press on and off. Default is off.
OPERATION Sources Sources Cont. To change any of the sources, press the Source (1) button on the KMC50. USB Source: FM Source: Function: How To: /FYU 5SBDL 1SFTT UIF 4FFL 6Q CVUUPO PODF Previous Track: Press the Seek Down (5) button once. Fast Forward: Hold the Tune Up (7) button. Rewind: Hold the Tune Down (5) button. Pause: Press the Play/Pause (6) button. Function: How To: Seek Up: Press the Seek Up (7) button once.
OPERATION Sources Cont. Audio Settings Bluetooth Source: Audio Menu: Press the Menu (3) button from any source screen to enter the Audio Settings Menu. Pressing the Menu (3) button will scroll between the available settings. Rotate the knob (8) to adjust the setting. Function: How To: /FYU 5SBDL 1SFTT UIF 4FFL 6Q CVUUPO PODF Previous Track: Press the Seek Down (5) button once. Pause: Press the Play/Pause (6) button. Bluetooth Device Name: Media Center.
TROUBLESHOOTING The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, please contact your local KICKER retailer or call 1-800-844-2774. General No power is being supplied to the unit- Check to ensure 12V is being supplied to the red wire and the black wire has a good ground.- Check the fuse - Press the Source button.
KMC50 Owner’s Manual IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
KMC50 v1.