Thank you for your trust and purchase. Please read this user manual before ! use and keep it for future reference. ! Matters Need Attention 1. Please check whether all the parts of the product are in good condition before use. If there is any problem like power cord damage, please do not use the product, and please contact the after-sale service or professional to replace it and then use, so as to avoiding danger. 2. Please use the product away from children.
Specification Rated Voltage/Frequency (US) 110-130V, 50/60Hz {please choose the corresponding (EU) 220-240V, 50/60Hz product) (UK) 220-240V, 50/60Hz Rated Power 400W Min/Max Capacity for Frothing 100mL (max) Max Capacity for Heating 350mL Working Mode 4 Modes Product Structure 1 Transparency Lid Accessory Liner 4. Handle hellhole 6.Control Panel & Button 7.
8.Indicator for Hot Frothing 9.Indicator for Heating Milk 10.Indicator for Cold Frothing vindicator for Heating Chocolate Milk twitchy & Mode Button 13.Scale of Max Capacity for Heating Milk: 350mL 14 Scale of Max Capacity for Frothing: 160mL 15.Scale of Min Capacity for Frothing: 100mL Please read the user manual carefully when receiving the package, and check whether the accessories are complete. Take out the frothier and connect it to power supply to check whether the frothier is working normally.
1.Pour milk in the frothier, please make sure the milk volume does not exceed the Max mark {refer to the above picture). 2.Connect the power base to power supply, and place the frothier with milk on the power base, you can hear a “beep” sound. And all the 4 indicator lights will be on for 1s and then off, indicating the frothier is standby and powered on. 3.
Ge The following usages tips will help you make better milk foam. + Please use whole milk to froth {fat capacity> 3.0%) for better result. « Please pour the milk before operation to avoid dry burning or overheating which may make the frothier fail to work normally. » Heat and froth the milk first, and prepare the coffee or hot chocolate as soon as the frothier is working.
io Problem Cause Solution ! Incorrect voltage. Connect with the correct voltage as Networking required The power plug is not connected Check the power plug, power supply. correctly/not powered on. The power base is not properly placed/in | Remove the frothier and place tan bad contact. the base again properly. The interior temperature is too high (dry | Pour cold water into the frothier to burning protection). cool it down. Continuous use.
Ee SG Before cleaning, please disconnect the power supply, separate the frothier body from the power base, and remove the lid. Do not soak the frothier body and the power base in water, and do not wash in dishwasher. The following cleaning methods are recommended: 1. Liner: Moisten a soft towel in cold or warm water added with a proper amount of detergent, then clean the anti-sticking liner, and dry it with a dry towel. 2, Lid: Remove the lid, rinse it with clean water and dry. 3.