SV1 SIRIUS One SIRIUS Satellite Radio Plug and Play User and Installation Guide
CONGRATULATIONS! Your new SV1 SIRIUS One SIRIUS® Satellite Radio Plug and Play Receiver lets you enjoy SIRIUS Satellite Radio’s digital entertainment in your vehicle, home, or boat. Use this guide to familiarize yourself with all of SV1’s features and capabilities. For the latest information about this and other SIRIUS products, please visit http://www.siriusradio.com. Table of Contents Safety Precautions ........................................................... 4 FCC Warning .............................
Table of Contents (continued) Audio Level ................................................................. Signal Indicator .......................................................... Factory Default .......................................................... Troubleshooting ............................................................... Specifications .................................................................. 12 MONTH LIMITED WARRANTY ..................................
Safety Precautions Warning Take the following precautions to prevent fire and avoid personal injury: • Be sure the Receiver is installed as described in the Installation Guide. • The use suggestions contained in this User Guide are subject to any restrictions or limitations that may be imposed by applicable law—the purchaser should check applicable law for any restrictions or limitations before installing and/or operating this Receiver.
BAND 1 Alcohol Swab and Velcro® Strips (T it kn o clea ow n pr ior n / un a su rf to ap know ace plyi n of ng emul any ad he sion sive s s.) SV1 SIRIUS One Receiver Su rfa ce Cle Pre an para ing K tion Package Contents The following items are packaged with the SV1 SIRIUS One. Check the package to be all of the items are included. If any of the items are missing, please contact the retailer where you purchased the product.
Installation Installation of your SV1 SIRIUS One is easy: 1. Choose a location in your vehicle where you will mount the Receiver, either on the visor, the dash, or the windshield. 2. Mount the Receiver on the visor using the visor/ dash mount, or on the dash using the visor/dash mount and the velcro strips, or on the windshield using the suction cup mount. 4. Install the magnetic antenna on the roof of the vehicle, and route the antenna cable to the Receiver. 4.
Depending upon your mounting choice, clip the Receiver to the visor, or, use the velcro strips to mount the Receiver to the dash, or, if you are using the suction cup mount, lightly moisten the surface of the suction cups which face the windshield (or other surface) and press the suction cups to the mounting surface. Sedan/Coupe: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear window.
Convertible: Mount the antenna along the centerline of the trunk lid, with the rubber antenna cable cover/ tail directed toward the rear window. Clean the area where the antenna and rubber antenna cable cover/tail will be mounted with the supplied alcohol swab. Connect the rubber antenna cable cover/tail to the antenna cable, making sure that the strain-relief on the antenna seats into the rubber antenna cable cover/tail groove.
PROTECTIVE MATERIAL (RED SIDE) ANTENNA (UNDERSIDE) ADHESIVE STRIP period, avoid car washes and other contact with the antenna and rubber antenna cable cover/tail. RUBBER ANTENNA CABLE COVER/TAIL ANTENNA CABLE RUBBER ANTENNA CABLE COVER/TAIL peel the yellow protective material from the adhesive strip and adhere the adhesive strip to the rubber antenna cover/tail. Next peel the red protective material from the adhesive strip and press the rubber antenna cable cover/tail firmly into place on the vehicle.
proceed with activating your SIRIUS subscription. AUDIO OUT ANT DC IN AUDIO OUT FM OUT DC IN ANTENNA FM OUT Activating your SIRIUS Subscription Before you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satellite Radio service. 1. Be sure that the Receiver is correctly installed and that the antenna is oriented to receive the SIRIUS signal. 2. Press the power button to turn Receiver On. After displaying the SIRIUS logo, the Receiver will update the SIRIUS channel line up.
search for a quiet frequency to use. Refer to the section titled, FM Transmitter in this User Manual for instructions on how to tune the FM transmitter to other FM frequencies. 5. Press the MENU button on the remote control and use the channel up and down buttons to display the “SIRIUS ID” menu option. Then press the Select button. This will display your Receiver’s unique 12-digit SIRIUS ID number (SID). You may also press and hold the Select button for two seconds to display the SID.
SV1 SIRIUS One Receiver Basic Operation 9 4. 5. 1 8 7 2 6 3 BAND 1 DISP 2 3 4 5 6. 5 4 1. POWER Button : Turns the Receiver’s power On and Off. 2. Channel Up/Down Buttons: Navigates through channels and display screens. 3. BAND Button (P.Tune): Pressing and releasing switches between the five preset banks (A, B, C, D and E), which hold five presets each. Pressing and holding enables “Preset Tune Mode”, which allows SV1 Receiver User and Installation Guide 7. 8. 9.
Remote Control 1 10 2 3 4 5 6 7 8 9 3 BAND 0 DISP 9 4 5 MUTE CH MENU 8 5 1 2 CAT SEL CAT CH 6 7 Installing Batteries in the Remote 1. Remove the battery cover. 2. Install CR2032 battery. (+ positive side is up) 3. Replace the battery cover. 14 1. Power Button : Turns the Receiver power On and Off. 2. Number Buttons (0-9): Used for directly selecting channels and for presets. 3. BAND Button: Switches between preset bands A , B, C, D, and E. 4. MUTE Button: Mutes the audio. 5.
After you have successfully activated your SIRIUS subscription, and the Receiver has received the subscription information from the SIRIUS signal, the default display screen will be displayed. P O P [ 1 5 ] When the Receiver is powered On, the previously selected channel will automatically begin playing, and the channel name of the current channel will be displayed. Pressing the category previous or next button will cause the Receiver to display a listing of the previous or next channel category.
0 1 4 C l s V i n y l 0 1 4 R o c k 0 1 4 A l i c e 0 1 4 S c h o o l ' s C o Note: If you are viewing a sports category channel list (NFL®, NBA®, NHL®, or College), pressing and releasing the DISP button will instead toggle between the team names and the current score of any live play-by-play game.
Advanced Features Channel Presets (BAND) You can store up to 30 of your favorite channels as presets for quick recall access. The preset channels are stored in 5 bands, A, B, C, D, E, and F each containing 5 channel presets, and are numbered 1 to 5. The 5 channel presets in each band are accessed by pressing the appropriate number (1 to 5) on the Receiver. A momentary press and release of the BAND button cycles through the 5 preset bands (A, B, C, D, E, and F).
Searching for a Channel Preset (P.TUNE Mode) To quickly search through all of your presets in the P.TUNE mode, do the following: 1. Press and hold the BAND button for approximately 1 second to enter the P.TUNE mode. “Preset Tuning Mode” will momentarily be displayed and the preset number will be displayed to indicate the Receiver is in the Preset Tune Mode. P . T u n e A 1 M o d e C l s V i n y l 2.
If no FM frequencies have been preset when the FM Preset button is pressed, the Receiver will default to a frequency of 88.1 MHz. Pressing and holding the FM Preset button will display the list of FM presets. Use the channel up and down buttons to browse through the list. F M - 1 8 8 . 1 button. The preset will now display the new FM frequency. To select the preset, press the MENU button. You may also change the FM presets by using the FM Presets menu option of the Receiver.
To exit menu options, or any of the other menu option screens, repeatedly press and release the MENU key on the remote control until you are returned to the default display screen. The following sections explain each of the menu options in the order in which they are displayed on the Menu Options screen. SIRIUS ID This option displays your 12 digit Sirius ID (SID) number. The SID is unique to every Receiver and is required to activate your service.
press the select button. You will then enter a list of FM frequencies, beginning with the currently selected FM frequency for the preset. 8 8 . 1 M H z 3. Use your FM radio to locate quiet FM frequencies where there is no interference from adjacent FM stations. These are the frequencies which should be added to the FM presets list. 4. Using the channel up and down buttons, display the frequency you wish to select for the preset and press the select button.
Use the channel up and down buttons to display the “Brightness” or “Contrast” option, and press the select button. Brightness adjusts the overall intensity of the LCD display to help with viewing in different lighting conditions. Contrast adjusts the relationship between the background and the text on the LCD display. Use the channel up and down buttons, to adjust the brightness/contrast. The bar graph will move to indicate the change. - + To exit the Brightness/Contrast screen, press the MENU button.
Lock/Unlock To lock or unlock a channel, do the following: 1. Use the channel up and down buttons to display the “Lock/Unlock” menu choice, and press the select button. 2. If this is the first time that Parental Control is being used, you will be prompted to create and enter a four digit numerical code. This code can be any four digit number from 0000 to 9999.
The first time the Edit Code setting is accessed you will be prompted to enter a four digit code. This code can be any four digit number from 0000 to 9999. code was entered, and you will be prompted again to enter the code. W r o n g N e w# : If you should exit this prompt without entering a code, you will be prompted to set a code the next time you enter the Edit Code option. To change the Parental Control code, do the following: 1.
code, and you will have to repeat the process again. N o w C h a n g e d To exit the Parental Control menu, press the MENU button. If you have forgotten your Parental Control code, call SIRIUS Customer Service for help. Audio Level The Audio Level menu option adjusts the level of the audio output of the Receiver. To adjust the audio level, use the channel up and down buttons to change the audio level. The bar graph will move to indicate the change. To exit the Audio Level menu, press the MENU button.
to the right. The SAT screen indicates the satellite signal strength while TER screen indicates the terrestrial signal strength, if a terrestrial signal is available. To exit the Signal Level menu, press the MENU button. Factory Default The Factory Default option will restore most every feature of the Receiver to the original factory settings.
the factory, or display “No” to leave them as-is and return to the Menu Options menu. S u r e ? Y S u r e ? N 4. If Yes is chosen, the Receiver will revert to the original factory settings. R e s t o r i n g 5. When the Factory Default is complete, the Receiver will place you in Channel 184 the SIRIUS preview channel and display, “Call 1-888-539SIRIUS to Subscribe”. The Receiver is still subscribed to the SIRIUS service.
Troubleshooting This section lists several common problems and suggested solutions. If, after trying the suggested solutions listed here, you are still unable to resolve the problem you’re having with your Receiver, contact your installer, dealer, or retailer for more help. Problem Cause and Suggested Solution Receiver does not power on Blown fuse, or the power cable is not properly connected. Check for a bad fuse and check power cable connection.
Specifications Satellite Frequencies ............................................................................................. 2322.293/2330.207 MHz Terrestrial Frequencies ......................................................................................................... 2326.250MHz Power Requirements ............................................................................... 9-16 Volts, Negative Ground, DC Audio Output .........................................................................
12 MONTH LIMITED WARRANTY SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor.
Please record the SIRIUS ID (SID) in the space provided below: SIRIUS ID: SIRIUS Customer Service: 1-888-539-7474 SIRIUS Product Support: 1-800-869-5590 customercare@sirius-radio.
SIRIUS Satellite Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1-888-539-7474 www.sirius.