JVC KT-SR2000 Draft manual Jun.
3-DIGIT STREAM NUMBER STREAM NAME AUTO SIZING/SCROLLING SONG TITLE AUTO SIZING/SCROLLING ARTIST NAME 8-CHARACTER CATEGORY NAME SIGNAL STRENGTH INDICATOR BAND/PRESET BANK NUMBER Default LCD Display 2 CLOCK
Front Button description Channel up/down button and Select Button: The Channel up/down key is the primary control for navigating through the various lists and option menus available on the unit. In the default mode, the Channel up/down key provides sequential tuning through the available program streams. Press Channel up button is tunes up one stream-per-detent, while Press Channel down button is tunes down one stream-per-detent.
Basic Operation With the unit properly installed, activated and connected to your home or vehicle audio system, proceed as follows: 1. Press the Power button; the Shuttle turns on and the Sirius logo appears for 2 seconds followed by the default display for the stream and tuning mode in effect prior to turnoff. 2. Press Channel up/down button to select and play the desired stream, or use the Category Up/Down buttons to tune and select a desired stream based on genre.
Setting/Using Stream Preset Buttons The unit contains 10 preset buttons. There are three banks of preset memory locations offering a total of 30 presets. These banks are designated A, B and C and can be selected using the BAND button. The display in the lower right hand side changes to show the corresponding Preset bank. Each bank will store 10 user-preferred streams.
Display Button Pressing the Display button from the Default display toggles between the artist name/song title screen or large letter format. When the letter size changes, the field will scroll. This feature is useful when viewing the display at a distance. NOTE: The field will scroll only if the length of the artist or title cannot be viewed in its entirety. Pressing and holding the Display button will enter the stream list mode.
2. By holding down the MEMO button for 3 seconds, the stored memory information (one at a time) is displayed on the LCD screen in page format. Use the Channel up/down button to scroll through the 30-page listing and view the information. This function allows you to recall information regarding the Artist/Song Title for your own personal review. To return to the default tuning mode press and hold the MEMO button for 3 seconds. 3.
Momentarily pressing the MEMO button will exit the current menu and return to the previous menu. 4. When the S-seek function is on each time the Shuttle is turned on, it automatically searches the incoming signal to determine if a match exists between the signal and the currently saved information stored in receiver memory. If one or more matches are found, pop-up screen momentarily appears for 2 seconds and displays the Phrase S-Seek Alert.
After highlighting the selected title in the list, press the Select button to delete the stored Artist/ Song Title,and replace it with the updated information. b. By selecting Cancel, the prompt screen would disappear and revert to the original screen. Menu Display Operations To enter the Menu Options page, press the MENU Button. The Menu Options list will appear on the LCD display. Using the Channel up/down button, highlight the option you wish to adjust and then press the Select button.
The following adjustments are possible: Contrast Control Dimming Control Manual Automatic Font Type To enter any of these modes, use the Channel up/down button to highlight the option you wish to adjust and press the Select button. The automatic dimming function is enabled when Automatic is selected. Also the automatic dimming function is disabled when Manual is selected.
stream to be adjusted. Once a stream has been highlighted, pressing the Select button displays the text Lock next to the stream and prevents the stream from being accessible during any of the tuning modes. Locked streams can be accessed only by direct stream number entry, at which time the user will be prompted to enter the previously stored 4-digit code. Once the correct code has been entered, the audio begins to play.
The following adjustment options are possible: 1. Automatic Memory Search function - On or Off. Use the Channel up/down button to select between the 2 options by highlighting the desired selection. Then press the Select button to enter the option. 2. Clear all Memory Locations. Press the Select button; a prompt display screen appears confirming Are You Sure? Select Yes or No and press the Select button.
information and preprogrammed alarms will not be triggered until the shuttle updates the time information using the satellite signal. Alarm Clock: When this menu option is highlighted and selected, you will be able to set the unit to turn on at a specific time. The last selected stream prior to shutdown will be present when the Alarm feature is activated. Additionally, a series of beep tones will be heard. Press any button on the front panel to silence the alarm tones.
Program Alert On/Off: Press the Channel up/down button to toggle between Program Alert On or Program Alert Off. When the desired alert status is high lighted, press the Select button. Auto Shutdown In this mode, you have the option of programming the unit to automatically shut off after a 1- hour period without any user intervention. After 59 minutes of inactivity, a beep tone sounds, and a display prompt appears on the screen, stating Cancel Auto Shutdown.
●12 Hour Clock Format ●Eastern Time Zone ●Daylight Savings Time Observed 15
