Quick Start Guide

OOWOW will start automatically if the device storage is empty.

Control VIM1S with a display and keyboard, or remotely over

WiFi/LAN.

With OOWOW you will always be in control of your VIM1S.

Activate OOWOW: hold

Activate Hotspot: press

and press

Reset

after OOWOW starts

Network Name: vim1s-xxxxx (last 5 digits of serial no.)

Further information: https://docs.khadas.com/oowow

VIM1S Quickstart Guide

Website Introduction

For more documentation and technical information,

you can visit docs.khadas.com.

If you encounter technical issues during development,

seek help at forum.khadas.com.

To purchase additional accessories, please visit

shop.khadas.com.

OOWOW Introduction

VIM1S comes with the OOWOW embedded service.

Use OOWOW to install your preferred OS directly from

the Cloud.

Data Download Instruction

Schematics: dl.khadas.com/products/vim1s/schematic/

Datasheets: dl.khadas.com/products/vim1s/datasheet/

Specification: dl.khadas.com/products/vim1s/specs/

2D DXF: dl.khadas.com/products/vim1s/dxf/

3D CAD: dl.khadas.com/products/vim1s/cad/

After-Sales Service

Please email support@khadas.com if you have any

after-sales related questions.

To get started, visit

docs.khadas.com/vim1s

Setup

ANT-V-MO2.

Function

PAGE 1
Setup 1 2 3 5V OOWOW will start automatically if the device storage is empty. Control VIM1S with a display and keyboard, or remotely over WiFi/LAN. With OOWOW you will always be in control of your VIM1S. Activate OOWOW: hold Function and press Reset Activate Hotspot: press Function after OOWOW starts Network Name: vim1s-xxxxx (last 5 digits of serial no.) Further information: https://docs.khadas.com/oowow Website Introduction For more documentation and technical information, you can visit docs.khadas.
PAGE 2
Interfaces Interfaces USB 2.0 (500mA) 10/100M LAN HDMI (Output) USB-C (5V) USB 2.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.