Quick Start Guide

OOWOW Introduction

• Edge2 Maker Kit comes with the OOWOW embedded service.

• Use OOWOW to install your preferred OS directly from the Cloud.

• OOWOW will start automatically if the device storage is empty.

• Control Edge2 Maker Kit with a display and keyboard, or remotely

over WiFi.

■ With OOWOW you will always be in control of your Edge2 Maker

Kit.

Activate OOWOW: hold and press[^^3

Activate Hotspot: Dress after OOWOW starts

Network Name: edge2-xxxxx (last 5 digits of serial no.)

Further information: https:Z/docs.khadas.com/bowow

Website Introduction

• For more documentation and technical information, you can visit

docs.khadas.com.

• If you encounter technical issues during development, seek help at

forum.khadas.com.

• 1b purchase additional accessories, please visit shop.khadas.com.

Data Download Inst ruction

, Schematics: dl.khadas.com/products/edge2/schematic/

• Datasheets: dl.khadas.com/products/edge2/datasheet/

• Specification: dl.khadas.com/products/edge2/specs/

• 2D DXF: dl.khadas.com/products/edge2/dxf/

• 3D CAD: dl.khadas.com/products/edge2/cad/

After-Sales Service

questions.

YI/\ZD/\m

Edge2 Maker Kit

Quickstart Guide

To get started, visit

docs.khadas.com/edge2

PAGE 1
OOWOW Introduction • Edge2 Maker Kit comes with the OOWOW embedded service. • Use OOWOW to install your preferred OS directly from the Cloud. • OOWOW will start automatically if the device storage is empty. • Control Edge2 Maker Kit with a display and keyboard, or remotely over WiFi. ■ With OOWOW you will always be in control of your Edge2 Maker Kit. YI/\ZD/\m Edge2 Maker Kit Quickstart Guide Activate OOWOW: hold and press[^^3 Activate Hotspot: Dress after OOWOW starts Network Name: edge2-xxxxx (last 5 di
PAGE 2
Interfaces Interfaces Digital Cameral Microphone Camera2 Cameras Digital Microphone
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.