Quickstart | 入门指南
Interface Diagram RGB LED Indicator USB-C RGB LED Indicator Illustrate Status Motion Bluetooth Disconnected Blue (Flashing) Bluetooth Connected Blue (Breathing) SBC Yellow (Breathing) AAC Green (Breathing) aptX / aptX LL Turquoise (Breathing) aptX HD Purple (Breathing) LDAC White (Breathing) Erase Paring Record White (Triple Flash) Color
Setup Guide 1 Power On Plug BT Magic into the USB-C (I2S) port, then turn on the Tone2/Tone2 Pro. BT Magic will automatically turn on. 2 Bluetooth Pairing (1) Set Tone2/Tone2 Pro’s input mode to ‘I2S’. (2) Look for ‘BT Magic’ in your smartphone or tablet’s Bluetooth pairing list. Tap on it to pair. Wireless Wireless BT Magic BT Magic 3 Music Playback After pairing with your device, the RGB indicator will show a blue breathing light. BT Magic is now ready for music playback.
Specifications Bluetooth Chip:Qualcomm QCC5125 Bluetooth Standard:Bluetooth 5.1 Sample Rate:Up to 24bit 96KHz LED:RGB LED Connectivity:USB-C Bluetooth Formats:SBC/AAC/aptX/aptX-LL/aptX-HD/LDAC Compatibility:Khadas Tone2/Khadas Tone2 Pro FAQ How to erase Bluetooth pairing history? With BT Magic plugged-in and Tone2/Tone2 Pro powered off (USB cable with 5V power still plugged-in), long-press the volume knob for 5 seconds to Clear Bluetooth Paring Record.
What’s In The Box BT Magic * 1pcs Instruction Manual * 1pcs Warranty Card * 1pcs
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.