User Instructions

OUTOUT

ININ

OUTOUT BUTTONBUTTON

ININ BUTTONBUTTON

STARTSTART BUTTONBUTTON

FCCFCC IDID NUMBERNUMBER LOCATIOLOCATIO

3-6. 3B FEMA LE TERM INAL WI THCOV ER

8 TERMI NAL

CHART2CHART2

CHART1CHART1

ANTENNAANTENNA

OUTOUT WHITEWHITE

ININ WHITEWHITE

POWER+REDPOWER+RED

POWER-BLACKPOWER-BLACK

1.The function instruction of the front plate please see the picture 1

2.Press the power on button for 3 seconds to start the remote, the blue wireless light will be on .

The remote will close if there is no operation within 2mins by itself.Press OUT button ,

the winch will send out the rope (nylon rope /steel wire rope ),

press IN button , the wich will recycle the rope (nylon rope /steel wire rope )

3.Voltage of the sender :DC2-3.0V voltage of the receiver :DC9-15V

4.Distance ≤15M Due to the interference from the actual environment are always change when in use,

So the usage distance of the remote will change (distance is shorter).

5.To learn the matching function, keep pressing the power on button of the sender until the green light flicker,

PAGE 1
3-6.3B FEMALE TERMINAL WITHCOVER Φ8 TERMINAL FCC ID NUMBER LOCATIO OUT BUTTON ANTENNA POWER-BLACK POWER+RED IN BUTTON IN WHITE OUT WHITE OUT IN START BUTTON CHART1 CHART2 1.The function instruction of the front plate please see the picture 1 2.Press the power on button for 3 seconds to start the remote, the blue wireless light will be on . The remote will close if there is no operation within 2mins by itself.
PAGE 2
in the meantime press the learn button on the receiver until the red light on , flicker, and closed with voice "tick", then it means it's successful to matching the sender. 6.the receiver function please see the picture 2 FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.