Keysight Technologies N3300 Series DC Electronic Loads Data Sheet
02 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Increase your manufacturing test throughput with fast electronic loads –– Increase test system throughput –– Lower cost of ownership –– Decrease system development time –– Increase system reliability –– Increase system flexibility –– Stable operation down to zero volts –– DC connection terminal for ATE applications Increase Test Throughput Standard DC connectors Today’s high volume manufacturing requires optimization of test system throughput
03 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Design a system to test a variety of products: This series consists of 2 mainframes and 6 modules. The N3300A mainframe is full rack width. It has 6 slots. The N3301A mainframe is half rack width. It has 2 slots. Any assortment of the 6 different modules can be configured into these mainframes, up to the slot capacity. The N3302A (150 watts), N3303A (250 watts), N3307A (250 Watts) and N3304A (300 watts) each require one slot.
04 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Specifications Table A-1 lists the specifications for the different load models. Specifications indicate warranted performance in the 25 °C ± 5 °C region of the operating temperature range. Specifications apply to normal and transient modes unless otherwise noted.
05 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Specifications (continued) Table A-1 N3302A N3303A N3304A N3304-J01 Special order option N3305A N3306A N3307A Low range/High range 3 A/30 A 1 A/10 A 6 A/60 A 6 A/60 A 6 A/60 A 12 A/120 A 3 A/30 A Regulation 10 mA 8 mA 10 mA 10 mA 10 mA 10 mA 10 mA 0.1% + 5 mA 4 mA 7.5 mA 7.5 mA 7.5 mA 15 mA 7.5 mA 0.1% + 10 mA 7.5 mA 15 mA 15 mA 15 mA 37.
06 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Supplemental Characteristics Table A-2 lists the supplemental characteristics, which are not warranted but are descriptions of typical performance determined either by design or type testing. Table A-2 N3302A N3303A N3304A N3304A-J01 Special order option N3305A N3306A N3307A 0.05/0.5 mA 0.02/0.2 mA 0.1/1 mA 0.1/1 mA 0.1/1 mA 0.2/2 mA 0.05/0.
07 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Supplemental Characteristics Table A-2 (continued) N3302A N3303A N3304A/ N3304A-J01 N3305A N3306A N3307A 2 mA/ 20 mA 5 mV rms 1 mA/ 10 mA 12 mV rms 4 mA/ 40 mA 6 mV rms2 4 mA/ 40 mA 10 mV rms 6 mA/ 60 mA 8 mV rms 2 mA/ 20 mA 10 mV rms Ripple and noise (20 Hz–10 MHz) Current (rms/peak to peak) Voltage (rms) External analog programming Voltage programming accuracy1 0.
08 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Supplemental Characteristics for All Model Numbers Remote sensing: Command processing time: Vil = 0.9 V max at Iil = -1 mA Vih - 3.15 V min (pull-up resistor on input) Average time for the output voltage to change after getting a GPIB command is 3 ms for discrete commands, 1 ms for list commands List dwell characteristics: 5 V DC between sense and load input Digital/Trigger inputs: Digital/Trigger outputs: Vol = 0.
09 | Keysight | N3300 Series DC Electronic Loads - Data Sheet Keysight N3300A Top 624.8mm 24.6" 425.5mm 16.75" 177.8mm 7.0" 190.5mm 7.5" Rear 12.7mm 0.5" 50.8mm 2.0" Side Top 624.8mm 24.6" Keysight N3301A 213.4mm 8.4" 177.8mm 7.0" 190.5mm 7.5" Rear 12.7mm 0.5" 50.8mm 2.
| Keysight | N3300 Series DC Electronic Loads - Data Sheet Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. http://www.keysight.