Table of Contents II. 第 2 頁,共 10 頁 Hardware Hardware Installation …………………………. 2 Hardware Removal ……………………………. 3 Software Software Installation …………………………… 3 Automatic Installation ………………………….. 3 Password Setting ………………………………. 4 Product ID Recognition ………………………… 5 Software Removal …………………………….... 6 User Guide ……………………………………….. 7 Frequently Asked Questions ………………….. 10 Technical Support and Service ………………… III. IV. V. VI. Model : Wireless PC Lock Accessories : 1.
Table of Contents C. 第 3 頁,共 10 頁 If the following window is displayed on the screen, click the “ OK “ button to cancel the installation. ** Please double check to see if (a) the USB port is fully functional, and (b) the Wireless PC Lock receiver is properly inserted into the USB port. Software Installation Automatic Installation Place the driver software CD which comes with the Wireless PC Lock in the CD-ROM driver and the computer will automatically read and execute the installation program.
Table of Contents 第 4 頁,共 10 頁 When the software is installing, the computer screen will look similar to the one below. Once the software installation is completed, click the “ OK “ button. file://C:\tmp\安規\SEND\FOR%20FCC\Eng\ENG.
Table of Contents 第 5 頁,共 10 頁 Password Setting After the software driver installation is completed, the screen will look similar to the picture below. Please set at least one valid password. The Wireless PC Lock software accommodates a maximum of five (5) sets of passwords with up to 125 alpha-numeric characters in each password. Please note that the alpha-numeric characters in each password are case insensitive.
Table of Contents ** Causes for exceeding time limit: 1. Transmitter is off 2. More than two transmitters nearby 3. Off air RF interference 第 6 頁,共 10 頁 ** Actions: Turn on transmitter and make sure its LED blinks Follow recognize procedure to re-recognize Move transmitter closer to receiver until receiver’s LED blinks Software Removal There are two ways to uninstall the Wireless PC Lock software: 1.
Table of Contents 第 7 頁,共 10 頁 User’s Guide 1. The following taskbar icon indicates normal operation mode. 2. The following taskbar icon indicates computer lock-down mode. ** Lock-down mode : a. When the user walks away from the computer beyond the effective distance threshold, The receiver loses the transmitter signal and thus the computer enters lock-down mode. b. The transmitter under turn – off status. 3.
Table of Contents 第 8 頁,共 10 頁 b. Changing Password: c. Manual Lock : In any situation, click this button to force the computer to switch to Lock-down Mode by a valid password. d. Force Lock (1). This function forces the computer to enter the Lock-down Mode within 10 seconds, ignoring any signal from the transmitter during that period of time. (2). A short-cut is shown in the following illustration.
Table of Contents 第 9 頁,共 10 頁 (b) Warning of Incorrect Password: (c) Warning of Missing Hardware: Frequently Asked Questions Q1:Why can the computer not be locked? A1: The locking range may be enhanced by electro-magnetic interference in the surrounding area. Use the “Manual Lock” / “Force Lock” / “special function key” to enter Lock-down Mode by a valid password. Q2: Does the Wireless PC Lock support any computer operation systems ? A2: No.
Table of Contents 第 10 頁,共 10 頁 A5:125 characters maximum per password. Q6:Why does the battery die so quickly? A6:One CR2032 (3V) battery should be able to support 2000 hours of continuous usage. Due to the self leakage of the battery itself, please pay special attention to the expiration date of the battery itself.