Instruction Manual

1
DX_IM_GB
Handheld Terminal
DX Series
Instruction Manual
Be sure to read this instruction manual carefully prior to
operating this product. After reading, keep this manual
in a safe place so that you can refer to it at any time.
In this instruction manual, DX Series means the DX-A600/A600GE/A400/A400GE/W600.
The following symbols alert you to important messages. Be sure to read these messages
carefully.
• IEEE 802.11a/b/g/n/ac: These wireless LAN standards are set by the IEEE (Institute of
Electrical and Electronics Engineers) 802 LAN/MAN Standards Committee
responsible for formulating LAN technology standards.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by KEYENCE is under license. Other trademarks
and brand names are the property of their respective owners.
• microSD, microSDHC, and microSDXC are trademarks of the SD Association.
• Android™ is a trademark of Google LLC.
• Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
• ARM is a trademark or registered trademark of ARM Limited.
• Intel is a trademark or registered trademark of Intel Corporation.
• FeliCa is a registered trademark of Sony Corporation.
• Other company names and product names described in this manual are registered
trademarks or trademarks of each company.
• It is prohibited to use or copy all or any part of this manual without prior approval.
• The information contained in this manual is subject to change without notice.
• Software information
This product incorporates the software files developed independently by or for
Keyence Corporation, software files owned and licensed by a third party, and
software files subject to certain open source license agreements.
For information about such open source software files, please refer to the information
displayed on the following screen.
DX-A600/A400: From the app list screen, Settings  Device information  Legal
information
DX-W600: From the Start menu (All apps), DX setup tool  Device information 
Legal information
Such open source software files are provided on an “AS IS” basis to the maximum
extent permitted by applicable law.
You may obtain a copy of the source code corresponding to the binaries for GPL/
LGPL-licensed files by sending a request to Keyence customer service at
“[e-mail].”
There will be a charge to cover the costs of providing the source code.
The DX Series uses a visible semiconductor laser as a light source.
Follow the instructions mentioned in this manual. Otherwise, injury to the human body
(eyes and skin) may result.
The DX Series is classified as below in accordance with IEC 60825-1: 2014.
* The laser classification for FDA (CDRH) is implemented based on IEC 60825-1: 2014 in
accordance with the requirements of Laser Notice No. 56.
The degree of risk of this product is shown below.
• Risk group 1
* LED product is classified as shown below according to IEC 62471.
Follow the instructions mentioned in this manual. Otherwise, injury to the human body
(eyes and skin) may result.
 General cautions
 Handling of DX Series
 Handling of main battery (DX-BP6/BP3) and communication unit
with built-in main battery (DX-BS6/BS3/BQ6/BQ3)
Symbols
Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
Indicates a situation which, if not avoided, could result in product damage
as well as property damage.
Indicates cautions and limitations that must be followed during
operation.
Indicates additional information on proper operation.
Indicates tips for better understanding or useful information.
Safety Precautions on Laser Product
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
• Do not disassemble this product. Laser emission from this product
is not automatically stopped when it is disassembled.
Class 1 Laser Product
• Do not stare into the direct or specularly reflected beam.
• Complies with 21 CFR 1040.10 and 1040.11 except for conformance
with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated
May 8, 2019.
Item DX-A600/A600GE/A400/A400GE/W600
Wavelength 655 nm
Output 390 W
Laser class Class 1 laser product (IEC60825-1, FDA(CDRH) Part 1040.10*)
DANGER
WARNING
CAUTION
NOTICE
Important
Point
Reference
WARNING
Safety Precautions on LED Product
• Exempt group Does not pose any photobiological hazard.
• Risk Group 1 (Low-Risk) Does not pose a hazard due to normal
behavioral limitations on exposure.
• Risk Group 2 (Moderate-Risk) Does not pose a hazard due to the aversion
response to very bright light sources or due to
thermal discomfort.
• Risk Group 3 (High-Risk) May pose a hazard even for momentary or
brief exposure.
Possibly hazardous optical radiation emitted from this product. Do not
stare at operating lamp. May be harmful to the eyes.
Safety Precautions
• Do not use this product for the purpose of protecting a human
body or a part of a human body.
• This product is not intended for use as an explosion-proof product.
Do not use this product in a hazardous location and/or potentially
explosive atmosphere.
• Do not use this product in an application that may cause death,
serious injury, or serious property damage due to a failure with this
product occurring, such as nuclear power plants, on aircraft, trains,
ships, or vehicles, used within medical equipment, playground
equipment, roller coasters and other rides, etc.
• If the product is used in a manner not specified by the manufacturer,
the protection provided by the product may be impaired.
• Be sure to check that this product performs properly before starting
the work or operation.
• We recommend that you take substantial safety measures to avoid
any damage in the event of a problem occurring.
• Do not use this product in a manner not specified herein. Doing so
may result in fire, electric shock, or malfunction.
• Do not modify this product or use it in any way other than
described in the specifications. Otherwise, the functions and
performance cannot be guaranteed.
• Microscopic spots (black/bright spots), uneven brightness, or
crosstalk (a phenomenon where non-existent lines or patterns are
displayed) may occur on the LCD panel depending on the
conditions.
• If the same display remains on the screen for a long time,
afterimage may occur due to the characteristics of LCD.
• Using batteries other than those specified by KEYENCE may cause
fire or explosion. Be sure to use the specified battery.
• Use or store this product within the temperature range described in
“Specifications” (page 3). Do not leave the product inside a closed
car or at a place exposed to direct sunlight. Doing so may damage
the unit or change its reading performance.
• Use within the humidity range described in “Specifications” (page 3).
Do not use the product at locations where condensation occurs due
to the rapid temperature change. Doing so may damage the unit.
• This is a precision instrument. Dropping this product or subjecting
it to shock may cause damage. Be careful when carrying or using
this unit.
• Do not place the DX Series in a location with high humidity or a
dusty area. Doing so may damage the unit.
• Do not insert a sharp object such as a needle into the buzzer hole
on the back side of the DX Series. The tarpaulin may be damaged.
Observe the following precautions during use. Failure to do so may
result in heat generation, smoke generation, fire, explosion, battery
leakage, gas leakage, etc. of the main battery pack.
• Only use the specified battery.
• Do not charge, use, or store the main battery at locations of high
temperature above the specified range—such as near fire, in a
heated car, and under the scorching sun—or at locations of low
temperature below the specified range.
• Do not put it into fire or subject to heat. If there is battery leakage
or abnormal smell, immediately take it away from fire.
• Do not drop the main battery or subject it to strong pressure (such
as by crushing, bending, deforming, making holes in, cutting, or
throwing it).
Do not charge when conductive material is affixed to the charging/
communication contact. Clean this contact prior to charging.
CAUTION
DANGER
WARNING
CAUTION
NOTICE
WARNING
NOTICE
WARNING
NOTICE
96M17041
Instruction Manual