Instruction Manual

1
BT-A700 IM GB
Handheld Terminal
BT-A700 Series
Instruction Manual
Be sure to read this instruction manual
carefully prior to operating this product. After
reading, keep this manual in a safe place so
that you can refer to it at any time.
In this instruction manual, BT-A700 Series means the BT-A700/A700G/A700GM/A700GA.
The following symbols alert you to important messages. Be sure to read these messages
carefully.
• IEEE802.11a/b/g/n/ac: Wireless LAN standards established by 802 committee which
has designed standards of LAN technology in IEEE (Institute of Electrical and
Electronics Engineers).
• Bluetooth
®
wordmark and logo belong to Bluetooth SIG, Inc. and KEYENCE uses them
under license. Other trademarks or trade names belong to each owner.
• microSD, SDHC and SDXC are a trademark of SD Association.
• Other company names or product names described in this manual are registered
trademarks or trademarks of each company.
• It is prohibited to use or copy all or any part of this manual without prior approval.
• The information contained in this manual is subject to change without notice.
• Android is a trademark of Google LLC.
• Gorilla Glass is a trademark of Corning Incorporated.
• Qualcomm is a trademark of Qualcomm Incorporated, registered in the U.S. and other
countries.
• Software information
This product incorporates the software files developed independently by or for
Keyence Corporation, software files owned and licensed by a third party, and software
files subject to certain open source license agreements.
The open source software files are subject to the notices and additional terms and
conditions.
For information about such open source software files, please refer to the information
displayed on the following screen.
Home → [Settings] → [System] → [About phone] → [Legal information]
Such open source software files are provided on an “AS IS” basis to the maximum
extent permitted by applicable law.
If there is any discrepancy between the terms and conditions of the applicable open
source license agreement and the “License”, the terms and conditions of the
applicable open source license agreement prevail with respect to the applicable open
source software.
You may obtain a copy of the source code corresponding to the binaries for GPL/
LGPL-licensed file by sending a request to Keyence customer service at
“[e-mail]”. There will be a charge to cover the costs of providing the
source code.
The BT-A700 Series uses a visible semiconductor laser as a light source.
Follow the instructions mentioned in this manual. Otherwise, injury to the human body
(eyes and skin) may result.
The BT-A700 Seriesis classified as below in accordance with IEC60825-1.
 Locations of warning/explanation labels
 Warning/explanation label
The degree of risk of this product is shown below.
• Risk Group 1
* LED product is classified as shown below according to IEC 62471.
Follow the instructions mentioned in this manual. Otherwise, injury to the human body
(eyes and skin) may result.
Symbols
It indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
It indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
It indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
It indicates a situation which, if not avoided, could result in product
damage as well as property damage.
It indicates cautions and limitations that must be followed during
operation.
It indicates additional information on proper operation.
It indicates tips for better understanding or useful information.
DANGER
WARNING
CAUTION
NOTICE
Important
Point
Reference
Safety Precautions on Laser Product
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
• Do not disassemble this product. Laser emission from this product
is not automatically stopped when it is disassembled.
Class 2 Laser Product
• Do not stare into the direct or specularly reflected beam.
• Do not direct the beam at other people or into areas where other
people unconnected with the laser work might be present.
• Be careful of the path of the laser beam. If there is a possibility that
the operator may be exposed to the specular or diffuse reflections,
block the beam by installing a protective enclosure.
• Install this product so that the path of the laser beam is not as the
same height as that of human eye.
• BT-A700GA only
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007
Item BT-A700/A700G/A700GM BT-A700GA
Wavelength 650 nm 650 nm
Output 1.0 mW 1.0 mW
Laser class
• Class 2 laser product (IEC
60825-1)
Class 2 laser product (IEC60825-1,
FDA(CDRH) Part 1040.10*)
* The laser classification for FDA(CDRH)
is implemented based on IEC60825-1
in accordance with the requirements of
Laser Notice No.50.
Safety Precautions on LED Product
· Exempt Group Does not pose any photobiological hazard
· Risk Group 1 (Low-Risk) Does not pose a hazard due to normal behavioral
limitations on exposure.
· Risk Group 2 (Moderate-Risk) Does not pose a hazard due to the aversion response to
very bright light sources or due to thermal discomfort.
· Risk Group 3 (High-Risk) May pose a hazard even for momentary or brief
exposure.
Do not stare at operating LED. May be harmful to the eyes.
WARNING
Scanner
(Laser emission part)
Warning/explanation
label
BT-A700/A700G/A700GM BT-A700GA
CAUTION
96M15817
Instruction Manual