Use and Care Manual

3120 W. Carefree Hwy, 1-323 Phoenix AZ 85086 PH:602.759.9559 FX:602.759.9779
ID-UMC-1 Universal Mounting Clamp
The ID-UMC-1 Universal Mounting Clamp is the ultimate tool for mounting your Audio/Video equip-
ment. With snap-in-place technology, you can easily position the clamp exactly where you need it,
then easily relocate it if necessary. Place your equipment within its jaws, and with a few turns of the
knob the soft foam will securely hold almost anything.
• Heavy duty 1.7mm steel creates a very rigid clamping system
• Black Zinc plating assures that the finish will look new for years to come.
• Soft foam protects the equipment, while adding gripping force.
• Easy push snaps securely hold the clamp onto the breadboard of the ID-IWB enclosures. The
clamp is easily repositioned by simply unsnapping, moving it to the new position, and
re-snapping into place.
• The breakaway mounting post allows for a clean finish.
• Our knurled knob is designed to be easily turned, even in tight places.
• Top and bottom clamp have enough surface area to securely hold anything that fits in the box.
• A single clamp can hold most small pieces such as baluns, while two are recommended for larger
items such as processors.