USER MANUAL : MULTI-CHANNEL RF | WIRELESS THERM-CLOCK Buck CN— { | ofp ce ENGLISH dared Insolent-wases-00 |
Multi-Channel RF Wireless Thermos-Clock * Mods! No. W388 User Manual Congratulations an purchasing the Multi-Chance! RF Wireless Thermos Clack (W388). With Innovative design and user-friendly functions, it is surely your best choice. The product can measure indoor temperature as well as temperatures in different locations up to 30 meters away from main unit. Up to 3 remote sensors can be installed for one main unit, Other features like real-time clock, calendar and daily alarm are also + available.
[an 7 , RYE @ © Wall mounting hole Buttonwood To select temperature unit or decrease value in smelting mode SET/+ button To enter selling mode or increase value in salting made . CLEAR/12/24 button To reset maxi min temperature memory or change format of clock display RESET button Ta teas the whole system SCAN button To search and register resole sensors Battery compartment : 3 Nita: To noun the main uni on well, pull and tum the movable stand lo the position as shown in the following diagram.
Battery Installation no : The main unit is powered by 3 pos of "AAA" or UM-4 size 1.5V battery, and the sensor unit is powered by 2 pes of "AAA" or UMA size 1.5V _ battery. 1. Gently slide up to remove the battery door of main unt. Loosen the screw on the battery door of sensor uri and lightly remove the door. 2. Insert batteries according to polarity Indications inside the battery compartments. 3. Replace the battery doors and tighten the screw: [see illustration] I. .
HOW-TO OPERATE THE UNIT: Using following steps io set the clock and calendar (default is 0:00, 1 Jan 2000 for 24-hour format or 12:00 sm, 1 Jan 2008 for 12-hour format) ~ +4, Press SET end MODE buttons simultaneously for 2 seconds in nominal display mode, the unit will enter year setting mode, the digits of year will dash. . i 2. Press or *" button on the back side of the unit to increase or decrease tha value of year. Press and hold the button for mare than 2 seconds ta fast increase of decrease tha value.
Note: If theta is no key action within 10 seconds, } will quit from alarm 3. Press CHANNEL again to select any channels and quit from auto selling mode and return to normal display mods, scroll mode. Switch On/Off Dally Alarm + Maximization Memory | i reds AL. button once in normal display mode to enable or disable hie Unit will record maximum minimum temperatures for both indoor daily alarm. Alarm symbol £2 wll be displayed If alarm Js enable. JT and remote channels. 1.
Setting High/tow Limit 7 Press SET and MEMORY buttons simultaneously for more than 2 seconds In normal display mods, the unit wintergreen lower limit setting of indoor temperature. Previous stinging and the symbol ¥ will display and flash in indoor temperature display area. (see picture) Ze2 4,07T 1 Note: If this is the first teems to set high/low limit, the display will show cr 2. Press “#1” to Increases or decrease the value. 3. While setting, you can press CLEAR to clear values, 2.
PRACTICAL TIPS FOR SOLVING PROBLEMS +: ENCOUNTERED WITH 433MHz TECHNOLOGY. , PRODUCTS Ra Functional Description Tre 433MHz (Megahertz} technology facilitates the wireless, radio frequency transmission of data over short to medium distances. The information fo be transmitted is modulated onto 8 carrier wave oscillating at a frequency of 433MHz.
Clack = 1s 12026 hour format _ Time format Calendar Date format Temperature unit : Temperature range: Indoor 0°C to 50°C (32°F to 122°F) Remote -20°C to 80°C (4°F {a 140°F) Resolution 101°C Av curacy + #4 19C (from 0 to 40°C) +1-2°C (other range) Power 3% AAA" or UM-4 size 1,5V battery Sensor Unit RF transmission Water-resistance Temperature ran 20°C 16 60°C (-4°F to 140°F) Resolution 1G Accuracy 141 19C (firm 010 40°C) +2°C {other fangs) Power 12 X"AAA” Or UM-4 size 1.