Owner’s manual {Preliminary} Congratulations en your preliminary purchase of the VESSEL'S FRS 14 Channels Two Way Family Radio. For best results and ro ensure that you are able to employ the features and functions of your radio 10 their fullest, carefully read this manual and cheap it on band for future reference. Precautions: Never try to ke your radio apart; avoid sting impact and sudden temperature changes.
ho Belt Clips The radio is also equipped with a belt chip. To agate i, simply slide the fillip into the slot (Ree Fig nee 1) How to Use: Turn Ou the Radio: 1. Turn the volume knob clockwise, You will bear a short beep, ready to use. 2. Turn the volume knob counterclockwise to ram off the Figure 4) 3.
ing cor: This icon shows when ir ix transmitting, Note: When vou press “FUN” button, you will ses a “F” appears on the display. It will disappear when you press one more time. Monitor and Set the Channel: i. Fourteen different channels are available to be chosen from the radio. 2. While gelding the “MON” button, you can monitor the availability of each channel and also lets yon hear the volume level so that you can adjust the Figure 5) 3.
7 Optional There are two additional jacks located on the top of the unit for external earphone. 5mm} and microphone Smm) use.
sight to improve transmission Cannot change Channel Cheek iF the wits on “LOCK mode Heavy Static or Interference 1. Radios 1e0 close. Radios must be af least 5 feet apart, gainer your distance. 2. Radii wo far apt Obstacles interfere with transmission. Talk range miles in clear unobstructed conditions. Care and Safety: To clean the radio, wipe with a soft cloth dampened with water. Don't use cleaners or solvents pu the radio, they can ban the body and leak inside, causing permanent damage.
Class B digital device, pursuant to Part 15 of the FCC Rules, These meets are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference (6 radio communications. However, there is no guarantee they interference will not occur in a particular installation.