Data Sheet
Koppe-Platz 1
92676 Eschenbach - Germany
Tel.:
Fax:
info@kerafol.com
www.kerafol.com
+49 (0) 96 45 - 88 300
+49 (0) 96 45 - 88 390
Compression 86/60
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0 10 20 30 40 50 60 70
thermal resistance [K/W]
pressure [N/cm²]
Compression 86/60
86/60
Keratherm
Keratherm 86/60 offers outstanding ther-
mal conductivity, which is achieved by a
specially fi lled silicone elastomer. The ex-
cellent electrical insulation properties are
thereby retained. On request, these fi lms
can also be supplied with fi bre glass re-
inforcement and with or without adhesive
coating. The excellent thermal resistance of
this fi lm enables the optimum heat transfer
to the heat sink.
Applications
■ automotives
■ audio and video components
■ white goods
■ power converters (AC-DC, DC-DC)
■ engine controllers
■ LCD displays
Optionallly available with
adhesive coating!
Unit 86/60
pink
single layer,
without glass
reinforcement
K/W 0.14
°Cmm²/W 56
Kin²/W 0.079
W/mK 4.5
kV 5.0
kV/mm 20
Ωm > 600 x 10
9
1 0.0
1 1.47
mm 0.25
Shore A 60 - 75
°C -60 to +200
g/cm³ 1.38
Ma.-% < 0.32
UL-94 V-0**
mm 0.150 - 0.300
Properties
Colour
Assembly
Thermal Properties
Thermal resistance R
th
Thermal impedance R
ti
Thermal conductivity λ
Electrical Properties
Breakdown voltage U
d; ac
Dielectric breakdown E
d; ac
Volume resistivity
Dielectric loss factor tan δ
Dielectric constant ε
r
Mechanical Properties
Measured thickness (+/-10%)
Hardness
Physical Properties
Application temperature
Density
Total mass loss (TML)
Flame rating
Possible thickness
*details see page 60 **Kerafol test according to UL
Important notes on page 2 / back