Kenzen Device User Manual Rev A XXXXXXXX_RevA
Copyright © 2021 Kenzen, Inc. All rights reserved. Neither this publication nor any part thereof can be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form in whole or in part without prior written approval of Kenzen, Inc. This documentation is furnished under license and can be used or copied only in accordance with the terms of such license.
Contents i Contents Preface ............................................................................................................... 1 Document Conventions ...................................................................................................... 1 Kenzen General Safety and Compliance .............................................................................. 2 Contacting Kenzen ..........................................................................................................
Contents ii Kenzen Daily User Feedback ............................................................................................................................... 20 Signing Out the Kenzen Mobile App ................................................................................................................... 21 New Team Onboarding ..................................................................................... 22 Creating a New Team .........................................................
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 1 Preface This user manual provides instructions for operating and taking care of the Kenzen wearable device. Document Conventions This manual uses the following conventions. Convention Purpose Signal words call attention to a safety message and the degree of hazard as follows: Signal Words: Danger Warning Caution Notice DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 2 Kenzen General Safety and Compliance The Kenzen Device is designed to be used in industrial environments. However, it is not intrinsically safe and should not be used in any potentially explosive environment. Kenzen device users should follow general safety precautions and comply with any special instructions that may be specific to their environment.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 3 IMPORTANT NOTICE If the device is damaged by either consistent or occasional impact or exposure to any of the following conditions, the warranty will be voided.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 4 Introduction Kenzen Device The Kenzen Device is wearable smart Personal Protection Equipment (PPE) for industrial workers who need a complete continuous safety monitoring solution. The Kenzen device provides real-time safety alerts by monitoring each worker's key physiological indicators, such as core body temperature, heart rate, and exertion levels.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 6 Getting Started with your Kenzen Device The section contains instructions to get to know your device, such as charging, registering, and navigating through basic mobile application functionality. Charging the Device Battery Before using your device, Kenzen recommends you charge the device for 4 hours. 1. Insert the micro-USB cable into the device USB port (Figure 3). 2. Plug the USB power adapter into an appropriate electrical outlet (120/240V).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 7 Mobile Application Software Apple iOS Software On your mobile device, download and install the Kenzen Application from the Apple App Store Visit https://apps.apple.com/us/app/kenzen/id1512544065 Create a New User Account (All Users) 1. Launch the Kenzen Application 2. Select Create Account on the Sign In page Figure 4: Sign-In 3. Enter your First and Last name, sign-up code (optional if provided by admin) 4.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 5. 8 Enter your email address and select Get Code. Figure 5: Create Account Note: Your email address must match the email address provided to your Administrator or Kenzen representative. If Get Code returns an error, this indicates that the email address is not registered. Please contact your Administrator or Kenzen representative. 6. Check your email for a one-time code. 7. Enter the six-digit Verification Code and your user password.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 9 Create a New Administrator Account IMPORTANT NOTICE Administrator Account creation requires an invitation from a Kenzen onboarding specialist or your company administrator. Contact your representative if you have not received an Administrator invitation before proceeding. 1. From a personal computer, follow the unique Admin link sent to your email address. 2. Enter your first name, last name, password, and select Create Account. 3.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 10 Powering ON the Device Powering On 1. Quickly press and release the Kenzen “K” LED Power Button to turn on the device. 2. The Kenzen “K” LED light will blink The Kenzen “K” LED behavior will vary depending on the following: 3. If your device has never been connected to your mobile device, the LED indicator will flash green and blue after power on.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 11 Kenzen Device Placement IMPORTANT NOTICE The Kenzen device placement is critical for accurate physiological monitoring. Improper placement will cause erroneous alerts and will not protect you. Attaching Device to Your Arm 1. Determine which strap size fits your arm; small or larger strap sizes are provided. 2. With the device Kenzen “K” logo on the top side facing you (Figure 8). 3.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 12 IMPORTANT NOTICE Adjust the straps as needed for a comfortable fit but ensure that the device is in intimate contact with your skin and there is no gap. You can test this by carefully sliding two fingers between the device and your skin. Your fingers should feel some pressure between the device and your skin. If not, tighten the strap. Kenzen Device Connection Bluetooth Pairing 1. Power ON the Kenzen device by quickly pressing the Kenzen “K” button.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 13 Create a User Profile User Profile and Medical Questionnaire 1. Log into the Kenzen mobile application. 2. Go to Main Menu by pressing the Kenzen “K” logo or your custom image in the upper left corner of the Live View screen. 3. Select My Profile. 4. Enter your profile information, including Country of Residence, Typical Workday Length, Typical Workday Start Time, Gender, Date of Birth, Measurement units, Height, and Weight (Figure 13).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 14 Kenzen Device Live View When the Kenzen device is adequately secured on your arm and successfully connected to the Kenzen mobile application, the Live View window will display your Body Temperature and Heart Rate. You can monitor your realtime data in the Live View window. Switch between each view by selecting the corresponding icon at the bottom of the Live View window (Figure 15).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 15 Work Rest Calculator and Kenzen Device Alerts The Kenzen Work Rest Calculator gathers your workday information, including your clothing and local environmental information, to help Kenzen algorithms create an individualized alert system to help prevent heat stress injuries. 메모 포함[CR15R14]: I'm open to it. All of the sections or just certain parts should go before creating team? Indoor and Outdoor Setting 1. Log in to the Kenzen Mobile Application 2.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 16 Kenzen Device Alerts Stop Work alerts are triggered automatically based on individuals' body temperature, heart rate, environmental conditions, and other individualized physiological information. 1. Stop Work alerts are delivered to the phone via an app notification and by the device via haptic vibration on your arm. 2. When a Stop Work alert is received, select I will rest (recommended, or I feel Ok to work (Figure 19).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 17 Mobile App Alert Summary (All Users) 1. 2. On the Main mobile application window, select the Summary icon located in the lower right corner of the mobile app (Figure 22). Select the Alerts icon to view your alert summary for the past 24 hours (Figure 23). Figure 22: Summary Figure 23: Alerts Mobile App Team Alerts (Admin Users) 1. Go to the Main Menu and select Team Alerts (Figure 24). 2.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 18 Kenzen Team Dashboard Alerts (Admin Users) Team administrator accounts can view team alerts via the mobile application and the Kenzen Team Dashboard. 1. On your computer, go to https://www.kenzendashboard.com/kenzen/ 2. Log in with your administrator account credentials. 3. The Team Dashboard displays All Team members that you have permission to see as a Team Administrator (Figure 26). Figure 26: Kenzen Team Dashboard 4.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 19 Activity Flags Flags are available to identify important points in time and activities. 1. To add a Flag, Select the Plus sign icon located at the bottom of the main app Main Window (Figure 29). 2. Enter the Flag Label details to identify a specific point in time (Figure 30). 3. View Flags under the Summary page by selecting the Flag icon (Figure 31).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 3. 20 Alternatively, select the Heat Stress Condition that best describes your symptoms (Figure 33). Figure 33: Heat Stress Conditions Note: Kenzen does not provide medical based recommendations. Please consult your healthcare representative for medical diagnosis and treatment. Kenzen Daily User Feedback Daily feedback is anonymous and is used to improve Kenzen’s solutions and services. Registered users will be prompted daily to enter user feedback.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 21 Signing Out the Kenzen Mobile App To sign out of the mobile application, go to Main Menu and select Sign Out at the bottom of the menu (Figure 35).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 22 New Team Onboarding Creating a New Team Create a Team A team is a group of workers. Kenzen has developed an onboarding website to facilitate the creation of teams Note: Creating a team is only available to administrators. If you need to create a team, please contact your company administrator to provide you with administrator privileges. 1. On your computer, go to https://www.kenzendashboard.com/kenzen/ 2.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 23 Note: Step 6 is optional. Team Administrators can view all team members' alerts and device connection status. Please reserve admin privileges to managers and health care members. 7. Select Next to continue. 8. Invite new team members by entering the team members' email addresses. Select Add Another Member to add additional email addresses (Figure 39). 9. Select Submit when finished. Figure 38: Add Admin Users Figure 39: Add Team Members 10.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 24 Join a New Team Your Team Administrator will send an email inviting you to a team (Figure 41). If you haven’t received an email invitation, please contact your team administrator or a Kenzen Representative. Figure 41: Team invitation email 1. Log in to the Kenzen Mobile Application 2. Go to the Main Menu and select Join Team (Figure 42). 3. Enter the six-digit Access Code from the email and select Join Now (Figure 43).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 25 Troubleshooting and Maintenance If you encounter a problem with your device, please contact a Kenzen representative at support@kenzen.com. Resetting Account Password 1. Launch the Kenzen Application 2. Select Forgot Password on the Sign In page (Figure 44). 3. Enter your email address and select Get Code (Figure 45).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 26 Verifying Your Device Mac Address Your Kenzen device has a unique network Mac Address. Please identify your MAC address before contacting Kenzen Support. 1. Power On you Kenzen Device. 2. Launch the Kenzen mobile application. 3. Go to the Main Menu and select Devices. 4. Record the unique 12-digit MAC address listed below your Kenzen Device Name (Figure 46).
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 27 Kenzen LED Status Indicators The Kenzen device provides visual status indicators by displaying various LED colors, flashes, and haptic feedback. The table below describes the device status and corresponding Kenzen “K” LED behavior and haptic feedback if available.
오류! 여기에 표시할 텍스트에 Heading 1 을(를) 적용하려면 홈 탭을 사용하세요. 28 Cleaning Your Device Maintaining a clean Kenzen Device helps ensure that the device operates properly. Kenzen recommends cleaning your device after each workday or at minimum every 20hrs of wear-time. To clean your device please follow the following guidelines. 1. Turn off the device by the press and holding the Kenzen logo button on the top of the device for 5 seconds. 2.
Appendix A. Operating Specifications 29 Appendix A. Operating Specifications It is recommended that you review these specifications before operating your KENZEN Device. Sensor Specifications 메모 포함[CR16]: @Skip Orvis Please confirm all specifications 메모 포함[SO17R16]: These are checked / good Specification Value Temperature Range (upper and lower) 0 C – 90 C Temperature Accuracy (upper and lower) ±0.
Appendix A. Operating Specifications 30 Specification Value Magnetometer 3-axis Algorithm Proprietary machine learning and alert system Software KENZEN Mobile iOS and Android application Environmental Specifications Specification Value Storage temperature -20°C to +55°C Operating Temperature -10°C to +50°C (Operation above 50°C may affect data quality) Electrical Specifications Name Value Internal Battery 3.7VDC 150mAh / 3.7VDC 240mAh Battery life 14-16 hrs.
Appendix B. Software and Firmware Upgrade 31 Appendix B. Software and Firmware Upgrade Upgrade Mobile Application 1. From your mobile device, download the new Kenzen App from the Apple App Store (version 1.5.1 and higher) https://apps.apple.com/us/app/kenzen/id1512544065 2. Sign into the Kenzen application with you user credentials or contact your manager to create a new account. Upgrade Firmware 1. 2. 3. 4. 5. 6. 7. 8. 9.
Appendix C. Regulatory Statements 32 Appendix C. Regulatory Statements FCC and Industry Canada Statements -. This Class B digital device meets all requirements of the Canadian Interference-Causing Equipment Regulations. -. Information to user. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Appendix C. Regulatory Statements 33 Export Regulation Statements IMPORTANT NOTICE The technical information contained with this document is subject to the Export Administration Regulations. Export of this technical information to foreign persons or foreign companies, within or outside the United States, may require prior written authorization by the U.S. Department of Commerce, Bureau of Industry and Security. Contact Kenzen prior to such a transfer.
Appendix C. Regulatory Statements 34 WEEE Konformität Dieses Prudukt muss die EU Waste Electrical & Electronic Equipment (WEEE) Richtlinie 2002/96/EC erfüllen. Das Produkt ist durch folgendes Symbol gekennzeichnet: Kenzen hat Vereinbarungen mit Verwertungs/Entsorgungsfirmen in allen EU-Mitgliedsstaaten getroffen, damit dieses Produkt durch diese Firmen wiederverweret order entsorgt warden kann. Füer mehr infromationen bitte kontaktieren sie Kenzen oder Ihre öertliche Vertretung.