FM/MW/LW TUNER KTF-2010 KTF-3010 INSTRUCTION MANUAL KENWOOD CORPORATION B60-3703-00 00 MA ( E2, T ) OC 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1
Before applying power Caution : Read this page carefully to ensure safe operation. KTF-3010/KTF-2010 (En) Units are designed for operation as follows. 2 Europe , U.K. and Russia ......................................................... AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS 1362) fuse. 2.The fuse cover must be refitted when replacing the fuse in the moulded plug. 3.
KTF-3010/KTF-2010 (En) Special features 3 ACTIVE RECEPTION (A.R.) (KTF-3010 only) When the receiving frequency changes by a tuning operation or recalling a preset station, the tuner automatically switches the IF BAND, RF ATT and ANT A/B functions to obtain the optimum reception conditions for the signals being received.
System connection KTF-3010/KTF-2010 (En) 4 Connection of the Audio components/Connection of the system control cord Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power lead until all connections are completed.
KTF-3010/KTF-2010 (En) 5 The system control operations Remote Control Lets you operate this unit with the system remote supplied with the amp or receiver. Automatic Operation (except [XR] equipment) Automatically switches the input selector on the amp when you operate one of the tuning keys on this unit. Automatic EON reception Even if the input selector on the amp is set to a source other than tuner, the amp will automatically switch to tuner when an EON broadcast you are waiting for is received.
Controls and indicators KTF-3010/KTF-2010 (En) 6 PTY indicator AR indicator (KTF-3010 only) TA indicator STANDBY indicator MEMORY indicator TP indicator Antenna A/B indicator (KTF-3010 only) NEWS indicator Tuning mode indicator STANDBY RDS EON RDS indicator AR MW LW FM Signal indicator TA NEWS TP PTY MEMO ANT A B * * * * * *.
Useful functions for broadcast reception KTF-3010/KTF-2010 (En) Each time the key is pressed, the operation mode changes. ACTIVE RECEPTION (A.
Broadcast reception KTF-3010/KTF-2010 (En) 8 This section shows you how to receive radio broadcasts. You can store up to 40 stations in the memory and recall them with a single touch of the key. The figure shows an example for the KTF-3010 AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND TUNING/MULTI CONTROL WIDE Preparation NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B TA/NEWS PTY/ PTY SCARCH DISPLAY MEMORY RDS EON RFATT BAND TUNING MODE +10/CLEAR P.
RDS (Radio Data System) KTF-3010/KTF-2010 (En) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. This unit is equipped with the following functions utilizing RDS data: (Be sure to set the automatic memory function - otherwise, the RDS function will not work.
Storing broadcast stations in memory KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 10 The automatic memory function allows you to store up to 40 stations using only one button. The manual preset function allows you to store stations one at a time. AM-FM STEREO SYNTHESIZER TUNER KTF-3010 HIGHBLEND TUNING/MULTI CONTROL WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B TA/NEWS PTY/ PTY SCARCH DISPLAY MEMORY RDS EON RFATT TUNING MODE +10/CLEAR BAND P.
Receiving a preset station KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 AM-FM STEREO SYNTHESIZER TUNER KTF-3010 11 HIGHBLEND TUNING/MULTI CONTROL WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B TA/NEWS PTY/ PTY SCARCH DISPLAY MEMORY RDS EON RFATT TUNING MODE +10/CLEAR BAND P. CALL ON/STANDBY 2 1 3 4 5 6 7 8 9 DOWN 0/CHARA. UP : Keys or controls to be used in this operation. Receiving a preset station 1 Set to the Call up (Sellect) mode.
Displaying broadcast station names KTF-3010/KTF-2010 (En) The figure shows an example for the KTF-3010 Preparation AM-FM STEREO SYNTHESIZER TUNER KTF-3010 Switch the ON/STANDBY key to ON. HIGHBLEND TUNING/MULTI CONTROL WIDE NARROW ACTIVE RECEPTION IF BAND RF ATT ANT A/B TA/NEWS PTY/ PTY SCARCH DISPLAY MEMORY RDS EON RFATT TUNING MODE +10/CLEAR BAND P. CALL ON/STANDBY 1 2 3 4 5 6 7 8 9 DOWN 0/CHARA. UP : Keys or controls to be used in this operation.
PTY search KTF-3010/KTF-2010 (En) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. The figure shows an example for the KTF-3010 With certain receiving conditions, if may take more than 1 minutes until the search completes.
KTF-3010/KTF-2010 (En) 14 3 Start the search. When searching for a Rock Music broadcast. Display with the tuner is searching Blinks PTY PTY/ PTY SEARCH ROCK M Program type name display. When a station is received. PTY ROCK To change to a different program type: M Repeat steps 1, 2, 3. Blinks When a station is confirmed. Goes off FM ANT A PTY AR RDS BBC 1 FM STEREO TUNED AUTO Station name display. ÷ No sound is heard while "PTY" is blinking.
EON reservation KTF-3010/KTF-2010 (En) By using the EON function which administers the information of other stations, you can reserve the desired information such as traffic announcement, news and so on, even though these types of programs are not currently broadcast. While listening to a station which makes the EON indicator light, the tuner automatically selects the station which starts broadcasting the program of the desired information.
KTF-3010/KTF-2010 (En) 16 When the amplifier and the tuner are connected with the system control cord 4 Even if the input selector of the amplifier is connected to the source other than the tuner, the input selector of the amplifier switches to the tuner when the desired program starts in the EON reservation mode. Combined with the [SL16], the input selector returns to the original source after the desired program finishes, however, with a [XS8] it will not.
Specifications KTF-3010/KTF-2010 (En) 17 KTF-2010 FM tuner section MW (AM) tuner section Tuning frequency range ......................... 87.5 MHz ~ 108 MHz Usable sensitivity (DIN) MONO ....... 1.3µV(75 Ω)/13.5 dBf(40 kHz dev., S/N 26 dB) STEREO ..... 50µV(75 Ω)/45.2 dBf(46 kHz dev., S/N 46 dB) Limiting level (DIN) ................................ 1.0µV(75 Ω)/11.2 dBf Total harmonic distortion (DIN at 1 kHz) MONO .............................................. 0.1 % (65.2 dBf input) STEREO .............
KTF-3010/KTF-2010 (En) 18 KTF-3010 FM tuner section MW (AM) tuner section Tuning frequency range ......................... 87.5 MHz ~ 108 MHz Usable sensitivity (DIN) MONO .................. 1.3µV(75 Ω)/13.5 dBf(40 kHz dev., S/N 26 dB) STEREO ................... 50µV(75 Ω)/45.2 dBf(46 kHz dev., S/N 46 dB) Limiting level (DIN) ................................ 1.0µV(75 Ω)/11.2 dBf Total harmonic distortion (DIN at 1 kHz) MONO ................................ 0.08 % (85.2 dBf input, WIDE) STEREO ..........
KTF-3010/KTF-2010 (En) MEMO 19
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
