KTC-SR901 SIRIUS SATELLITE RADIO TUNER 3 page 2- 12 INSTRUCTION MANUAL SINTONIZADOR DE RADIO POR SATÉLITE SIRIUS 3 página 14 - 24 MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new sirius satellite radio tuner. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Safety precautions...................................................................3 Operations Sirius ID [ESN] display .........................................................................................4 Selecting Sirius Mode..........................................................................................4 Switching Seek Mode..........................................................................................4 Selecting the Preset Band ........................................
Safety precautions 2WARNING To prevent injury and/or fire, take the following precautions: • When extending the battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • To prevent short circuits, never put or leave any metallic objects (e.g.
What is Sirius Satellite Radio? Sirius is radio the way it was meant to be: up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite. That means 60 channels of completely commercial-free music. Plus up to 40 more channels of news, sports, and entertainment from names like CNBC, Discovery, SCI-FI Channel, A&E, House of Blues, NPR, Speedvision and Comedy World. Sirius is live, dynamic entertainment, completely focused on listeners.
Operations Switching Seek Mode Sets the seeking mode. Press the [AUTO] button. Each time the button is pressed the Seek mode switches as shown below. Display Operation "Channel" Normal manual seeking control. "Preset" Search in order of the channels in the Preset memory. You cannot operate this unit during switching Channel or Category. Select Seek Mode in the MENU items of Control unit to press the [4]or [¢] button.
Operations Preset Tuning Calling up the channels in the memory. 1 Select the preset band Press the [FM] button. 2 Call up the channel Press the [#1] — [#4] button. The channels are called up as shown below. Press button Call up number [#1/5] No.1 j No.5 [#2/6] No.2 j No.6 [#3] No.3 [#4] No.4 Each time the button is pressed, the called up channel switches cyclically.
Direct Access Tuning (A models only) (Function of remote) Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. 2 Enter the channel Press the number buttons. 3 Do Channel Search Press the [4] or [¢] button. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • You can set up to Channel number 223.
Accessories 1 4 2 5 3 6 2CAUTION The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. 2. Install the Sirius antenna and connect the antenna wire to the Sirius satellite radio tuner. 3.
Connecting Wires to Terminals To KENWOOD disc changer / DAB control input / Sirius control input Control unit BATT SAT TERR GND Sirius Satellite Radio tuner FUSE 3A ANT Connection wire (supplied with the Disc changer) Sirius connection wire (Accessory1) TO HEAD UNIT TO CHANGER (Rear side) To control unit ANT FUSE 3A BATT GND TERR SAT (Front side) Fuse (3A) KENWOOD disc changer control input Sirius antenna wire NOTE Terminal cover (Accessory5) To connect the Disc changer, consult your Di
Installation ■ Mounting the Sirius Satellite radio tuner Unit • When making a hole in the chassis, check that the gas tank, break pipe, wire harness, or other part is not located on the other side, and be careful not to cause scratches. • When attaching the mounting fittings (Accessory2) to the Sirius satellite radio tuner unit, use only the supplied mounting screws (Accessory3) (M4 x 8 mm). Use of screws other than those supplied may result in internal damage or insecure mounting and is very dangerous.
Troubleshooting Guide If you use this for the first time, it may be difficult to receive signals in the beginning. In such a case, leave the SIRIUS source ON for 3 minutes and turn it OFF and ON. What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The Sirius mode cannot be selected. POSSIBLE CAUSE SOLUTION The Sirius connection wire is not connected.
Specifications Specifications subject to change without notice. Sirius tuner section Frequency range (Overall) ..................................................2320 MHz – 2332.5 Frequency range (TDM Channel#1(fc)) ................................................2322.293 Frequency range (COFDM Channel(fc)) ................................................2326.25 Frequency range (TDM Channel#2(fc)) ................................................2330.207 Usable sensitivity (TDM Channel) ......................
English- 13