KMM-BT728HD KMM-X704 KMM-BT328U KMM-BT328 KMM-BT260U KMM-BT228U KMR-M328BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Article 4 Right pertaining to the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents. Article 5 1. 2. 2.
Important Notice concerning the Software -jansson Copyright (c) 2009-2012 Petri Lehtinen
sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved.
T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org) BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Contents Before Use ................................................................................................. 3 Audio Settings........................................................................................ 29 Basics ......................................................................................................... 4 Display Settings ..................................................................................... 33 Getting Started .............................................
Before Use IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual. • Please keep the manual in a safe and accessible place for future reference. • USB rating is indicated on the main unit. To view, detach the faceplate. (Page 4) • Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected (page 37).
Basics Faceplate Attach Lights up when Bluetooth connection is established. (Page 22) Detach / : USB cable from the rear of the unit. How to reset Display window*1 Reset the unit within 5 seconds after detaching the faceplate. Detach button Volume knob To On the faceplate Turn on the power Press B SRC. • Press and hold to turn off the power.*2 Adjust the volume Turn the volume knob. Select a source • Press B SRC repeatedly. • Press B SRC, then turn the volume knob within 2 seconds.
Getting Started Basics Remote control (RC-406) (supplied for ) Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. / / : Can be remotely controlled with an optionally purchased remote control. / / : Remote control functions are not available. How to replace the battery To On the remote control Adjust the volume Press VOL or VOL . • Press and hold VOL to continuously increase the volume to 15. Press ATT during playback to attenuate the sound.
Getting Started To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob. 8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. 9 Turn the volume knob to select [DATE SET], then press the knob. 10 Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” “Month” “Year” or “Month” “Day” “Year”. 11 Press and hold [DISPLAY] [EASY MENU] (For / / / / ) When entering [FUNCTION]...
Getting Started 1 Turn the volume knob to select an item, then press the knob. [F/W UPDATE] [UPDATE SYSTEM] / [UPDATE HD] (for [F/W UP xxxx] [FACTORY RESET] [ENGLISH] [ESPANOL] [FRANCAIS] / ) [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit . [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.
HD Radio™ Tuner (for / ) You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . Select an HD Radio multicast channel Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels.... Press S / T to select your desired channel (HD1 to HD8). “LINKING” appears while linking to a multicast channel.
HD Radio™ Tuner (for / ) Default: [XX] Display received emergency alert messages The received emergency alert messages are stored in the Alert Message List, and you can check them later. While listening to the HD RADIO source... 1 Press to display the Alert Message List. 2 Turn the volume knob to select a message. 3 Press the volume knob to display the information related to the message. 4 Press [TUNER SETTING] [SEEK MODE] Selects the searching method for S / T buttons when pressed.
Radio (for / / / / ) Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the • “ST” indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. • The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast. instructions stated on the selected item. to exit.
(for / Radio / / / ) [TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up). ; [OFF]: Cancels. [PTY SEARCH] (For / / / ) Select the available Program Type (for Radio Broadcast Data System, see page 40), then press S / T to start. ) (For 1 Turn the volume knob to select the available Program Type (for Radio Data System, see page 40), then press the knob.
USB/iPod Select music drive While in USB FRONT/USB REAR/USB source, press 5 repeatedly. Selectable source: • / : USB FRONT/USB REAR/iPod FRONT/ iPod REAR or iPod BT • / / / / : USB/iPod USB or iPod BT Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. You can also select the music drive from the [FUNCTION] menu.
USB/iPod • To cancel, press or DIRECT. • Not available if Random Play is selected. • Not applicable for iPod FRONT/iPod REAR/iPod USB. Select a file to play From a folder or list • For iPod, applicable only when [MODE OFF] is selected. (Page 12) 1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. 4 Turn the volume knob to select a file, then press the knob. Selected file starts playing.
Pandora® (for / / / You can listen to Pandora on iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth). Preparation: • Install the latest version of the Pandora application on your device (iPhone/ iPod touch or Android device), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 6) 1 Start up the Pandora application on your device. 2 Connect your device to the USB input terminal.
(for Pandora® / / / / / ) Spotify You can listen to Spotify on iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth). Bookmark current song information Press and hold the volume knob. “BOOKMARKED” appears and the information is stored to your device. • The bookmark is available on your Pandora account but not on this unit.
Spotify To On the faceplate On the remote control Play back/pause Press 6 IW. Press ENT IW. Skip a track Press S*3 / T. Press S*3 / T (+). Select thumbs up or thumbs down *4 Press 2 /1 . Press #FM+/ AM–. Start radio Press and hold 5. ( Not available ) Repeat play*5 Press 4 ( Not available ) repeatedly. [REPEAT ALL], [REPEAT ONE]*3, [REPEAT OFF] Random play*5 Press 3 repeatedly *3. ( Not available ) Search for a song or station .
SiriusXM® Radio (for / / / ) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . 1 Press B SRC repeatedly to select SIRIUS XM. 2 Press BAND repeatedly to select a band. 3 Press .
SiriusXM® Radio (for / / / SiriusXM Keymode ) SmartFavorites and TuneStart™ Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode) “ ” indicator lights up when replay keymode is selected. When channel keymode is selected... To On the faceplate On the remote control Select a channel Press S / T. Press S / T (+). Change a channel rapidly Press and hold S / T. Press and hold S / T (+).
SiriusXM® Radio (for / / / SiriusXM settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. ) [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to lock. ; [OFF]: Cancels. [CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
AUX Using Other Applications You can listen to music from a portable audio player via the auxiliary input jack. KENWOOD Remote application Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6) Start listening 1 Connect a portable audio player (commercially available). You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using KENWOOD Remote application. • For more information, visit
Using Other Applications Settings to use KENWOOD Remote application [STATUS] 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated. 4 Press and hold to exit. To return to the previous setting item, press . Shows the status of the selected device.
Bluetooth® • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings.
Bluetooth® Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to [ON]. (Page 26) Press the volume knob to pair once you have confirmed the device name. The following operations may differ or be unavailable depending on the connected phone. To On the faceplate On the remote control Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press . Reject a call Press .
Bluetooth® *1 This adjustment will not affect the volume of the other sources. *2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. Improve the voice quality 1 Press While talking on the phone... 1 Press the volume knob to enter [FUNCTION].
Bluetooth® [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2 / 1 . • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select “1” to search with numbers and select “ ” to search with symbols. 2 Turn the volume knob to select a name, then press the knob.
Bluetooth® Bluetooth mode settings [INITIALIZE] 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the . 1 Press and hold . Default: [XX] [AUDIO SELECT] Selects the phone or audio device to connect or disconnect. “ ” appears in front of the device name when connected. “ ” appears in front of the current playback audio device.
Bluetooth® Bluetooth — Audio To On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*, [REPEAT OFF] While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. Listen to the audio player via Bluetooth Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. Select a file from a folder/list Refer to “Select a file to play” on page 13.
AMAZON ALEXA (for / / Alexa is the cloud-based voice service developed by Amazon. You can ask Alexa to play music, get weather reports, traffic information, control smart home devices, shop on Amazon, search the internet, set reminders and more. Preparation: • Create an account at . • Install the latest version of the Alexa mobile application on your device (iPhone/iPod touch or Android device), then log in to the application.
(for / AMAZON ALEXA / / / ) Audio Settings 2 Communicate with Alexa via the connected microphone. (Page 22) “THINKING...” appears when Alexa is processing your voice input. “SPEAKING...” appears while Alexa is responding to your voice input. “ALEXA” or display information such as playing time, song title, etc. appears while Alexa is in idle state. • To return to the previous source before ALEXA, press B SRC (or press SRC on the remote control). • To activate Alexa, press .
Audio Settings [MANUAL EQ] [62.5HZ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [SOUND EFFECT] [SOUND RECNSTR] (Sound reconstruction) (Not applicable for RADIO source, AUX source and SIRIUS XM source.
Audio Settings [X ‘ OVER] [TWEETER] [FRONT HPF] [REAR HPF] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the crossover frequency for the tweeter speaker. [GAIN LEFT] [–8] to [0]: Adjusts the output volume of the left tweeter. [GAIN RIGHT] [–8] to [0]: Adjusts the output volume of the right tweeter.
Audio Settings Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, see the following “Determining the delay time automatically”.
Display Settings Zone identification for color settings and brightness settings Change the display settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. 4 Press and hold To return to the previous setting item, press Zone identification for brightness setting .
Display Settings [DIMMER] [BRIGHTNESS] Dims the illumination. [ON]: Dimmer is turned on. [OFF]: Dimmer is turned off. [DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. Default: [ON]: [6:00PM] ; [OFF]: [6:00AM] Sets the brightness for day and night separately. 1 [DAY]/[NIGHT]: Select day or night. 2 Select a zone. (See the illustration on page 33.
Installation/Connection This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Part list for installation (A) Faceplate (×1) (B) Trim plate (×1) (C) Mounting sleeve (×1) (D) Wiring harness (×1) (E) Extraction key (×2) (F) Screws* WARNING • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting.
Installation/Connection Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). Use only the specified screws. Using wrong screws might damage the unit. Do the required wiring. (Page 37) Removing the unit 1 Detach the faceplate. 2 Remove the trim plate.
Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) Antenna terminal White To front speaker (left) Gray To front speaker (right) Gray/Black Green To rear speaker (left) To rear speaker (right) Ignition switch If no connections are made, do not let the wire come out from the tab.
Installation/Connection Connect external components Connect external amplifiers via output terminals When connecting an external amplifier to the output terminals of this unit, securely connect the amplifier ground wire to the car chassis to prevent damage to the unit. Model Output terminals / REAR: Rear output FRONT: Front output SW: Subwoofer output REAR/SW: Rear/subwoofer output / / / / No Part 1 For 1.
References Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector. Connector (on the reverse side of the faceplate) More information For: – Latest firmware updates and latest compatible item list – KENWOOD original application – Any other latest information Visit .
References About AMAZON ALEXA • Alexa is a third party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.
References Change the display information (For / / / / Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank.
Troubleshooting References (For / ) Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank. Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly.
Troubleshooting “UNSUPPORTED DEVICE” appears. • Check whether the connected USB device is compatible with this unit and ensure the file systems are in supported formats. (Page 39) • Reattach the USB device. “UNRESPONSIVE DEVICE” appears. Make sure the USB device is not malfunction and reattach the USB device. “USB HUB IS NOT SUPPORTED” appears. This unit cannot support a USB device connected via a USB hub.
Troubleshooting The Spotify application is not connected properly or user is not login. End the Spotify application and restart. Then, log in to your Spotify account. “CH LOCKED LOCK CODE?” The selected channel is locked. Enter the correct pass code to unlock. (Page 19) “CHAN UNSUB” The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe. (Page 17) “CH UNAVAIL” SiriusXM® Radio Remedy “CHECK APP” Symptom The selected channel is unavailable.
Specifications Troubleshooting Symptom AMAZON ALEXA Remedy / There is no registered device connected/found via Bluetooth. FM : Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) Usable Sensitivity (S/N = 30 dB) 7.2 dBf (0.63 μV/75 Ω) “ERROR” Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried. Bluetooth device cannot get the contact information. Quieting Sensitivity (DIN S/N = 46 dB) 15.2 dBf (1.
Specifications USB Standard USB 1.1, USB 2.0 (High speed) File System FAT12/16/32 / / / : 87.9 MHz — 107.9 MHz (200 kHz step) Maximum Supply Current DC 5 V Frequency Response (±1 dB) 20 Hz — 20 kHz : 87.5 MHz — 108.0 MHz (50 kHz step) Signal-to-Noise Ratio 98 dB (1 kHz) Dynamic Range 93 dB Usable Sensitivity (S/N = 30 dB) 8.2 dBf (0.71 μV/75 Ω) Channel Separation Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
Version Bluetooth 4.2 Frequency Range 2.402 GHz — 2.480 GHz 4 000 mV/10 kΩ RF Output Power (E.I.R.P.) +4 dBm (MAX), Power Class 2 : 5 000 mV/10 kΩ Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Profile HFP 1.7.1 (Hands-Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP 1.6.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio™ and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
..
lnformadon acerca dt la tliminadon cit tqaipos tlectrkos ytlt
IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: . 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesir~ operation of the device.
-pertaining to the l.ictnsecl Softwn ' Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholderl'), and the User shall not be entitled to any right other than the license granted hereunder, in respect ofthe Licensed Software and any related documents. AftkleS 1.
Important Notice concerning the Software -CMP -jansson The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Copyright (c) 2009-2012 Petri Lehtinen
Installation/Connection ■ Basic procedure 1 Remove the key from the ignition switch, then disconnect the 8 terminal of the car battery. This section is for the professional installer. 2 Connect the wires properly. See "Wiring connection" ~n page 3. For safety's sake, leave wiring and mounting to professionals. Consult the _ 3 Install the unit to your car. See the following "Installing the unit (incar audio dealer. dash mounting)". 4 Connect the 8 terminal of the car battery.
Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on be>th sides) with the vehicle mounting bracket and secure the unit with screws (supplied/ commercially available). .. ••• • ~ W.X".' Antenna terminal . . =---~8 1ri"iai---•1--"'--.............................. Fuse (10 A) 19 // (3/81r~---1 MSmm MSmm - Wiring connection ·A Use only the specified screws. Using wrong screws might damage the unit.
Before Use Basics lMPORTANT Faceplate • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. Please keep the Guide in a safe and accessible place for future reference. KMM-BT728HD KMM-BT328U KMR-M328BT Lights up when Bluetooth connection is established. A WARNING KMM-BT728HD !l3Mfistl•Si: USB cable from Do not operate any function that takes your attention away from safe driving.
Turn on the power Press (!) SRC. • Press and hold to turn off the power. Adjust the volume . Turn the volume knob. Select a source Press (!)SRC repeatedly. Change the display information Press DISP repeatedly. Getting Started • Select the display languag~ and.cancel the. demonstration To adjust the clock . 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. ' 4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of "Hour"• "Minute".
Default:!m USB/iPod [SYSTEM) [KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [FACTORY RESET] [YES]: Resets the settings to default (except the stored station).; [NO]: Cancels. ■ Start playback The source changes automatically and playback starts when you attach a device 1USB device/ iPod/iPhone) to the USB input terminal. [ENGLISH) [ESPANOL} Play back/pause Press 6 ► II. [FRANCAIS] Reverse/Fast-forward Press and hold~/~- Select a file Press~/~.
Functions Settings Examples of some well-used settings - ■ Subwoofer Level Setting 1 Press the volume knob" to enter [FUNCTION). 2 Turn the volume knob to select an item, then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold C\/!:> to exit. To return to the previous setting item, press C\/~. • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item:
■ Illumination Color Setting For 6 7 KMM-BT728HD KMR-M328BT , you can set your preferred illumination color for each zone. Repeat step 4 and step 5 to set color for other zones. Press and hold C\/~ to exit. \o.,~ Other Information ALL ZONE ' 1 Press the volume knob to enter [FUNCTION]. ~ ~ FU"'JrTTntt, I L. I .LUI '4 For playback operations of AUX, Spotify, Pandora•, SiriusXM• Radio, AMAZON ALEXA sources, refer to the INSTRUCTION MANUAL on the follqwing website:
Bluetooth® Once pairing is completed, Bluetooth connection is established automatically. KMM-BT728HD • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology mijnufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio"' and the HD, HD Radio, and "ARC" logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
MILITARY Units purcllase
U.S.A. CANADA JVCKENWOOD USA Corporation This warranty will be honored only in the U.S.A. WHO IS PROTECTED This warranty is enforceable only by the origill81 purchaser. KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS HOW LONG IS THE WARRANTY JVCKENWOOO USA Corporation ("Kenwood') warrants this product for a period of one (1) year from the dale of original purchase.