Operation Manual
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Default:
XX
AUDIO CONTROL
SWITCH PREOUT
REAR
/
SUB-W
or
REAR
/
SUBWOOFER
: Selects whether rear speakers
or a subwoofer are connected to the line out terminals on the rear
(through an external amplifier).
SP SELECT OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size
(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for
optimum performance.
DISPLAY
EASY MENU
(For )
ON
:Both display and button illumination change to white color when
entering [
FUNCTION
].;
OFF
:Both display and button illumination
remain as [
COLOR
SELECT
] color. (
11
)
TUNER SETTING
PRESET TYPE
NORMAL
:Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW).;
MIX
:Memorizes one station for each
preset button, regardless of the selected band.
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables. (
9
)
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M
: 20minutes;
40M
: 40minutes;
60M
: 60minutes;
WAIT TIME – – –
or
OFF – – –
:Cancels
Set the clock and date
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
CLOCK
], then press the knob.
To adjust the clock
3 Turn the volume knob to select [
CLOCK ADJUST
], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour
Minute
5 Turn the volume knob to select [
CLOCK FORMAT
], then press the knob.
6 Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
To set the date
7 Turn the volume knob to select [
DATE FORMAT
], then press the knob.
8 Turn the volume knob to select [
DD/MM/YY
] or [
MM/DD/YY
], then press
the knob.
9 Turn the volume knob to select [
DATE SET
], then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day
Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press .
Set the initial settings
1
Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [
FUNCTION
].
• Pressing AUD enters [
AUDIO CONTROL
] directly.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
3
2
JS_KWD_KMM_202_ENE2N_EN_4.indd 4JS_KWD_KMM_202_ENE2N_EN_4.indd 4 27/7/2015 3:21:00 PM27/7/2015 3:21:00 PM