KDC-4024 KDC-4024V KDC-3024 KDC-307 CD-RECEIVER INSTRUCTION MANUAL © B64-2484-00 / 00 (EW/EN)
English Contents Safety precautions......................3 About RDS ..................................5 About CDs...................................5 General features .........................6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Theft Deterrent Faceplate TEL Mute Tuner features .............................9 Tuning Station Preset Memory Auto Memory Entry Preset Tuning RDS features .............................
Safety precautions 2WARNING 2CAUTION To prevent injury and/or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotivegrade wires or other wires with an area of 0.
English Safety precautions NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operatin should be restored.
About RDS About CDs RDS (Radio Data System) Handling CDs CD cleaning When listening to an RDS station, the programme service name of the station is displayed, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit alternative frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you want to listen to.
English General features Power Release button AM FM 4 ¢ ud Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source SRC ATT/ LOUD CLK Press the [SRC] button.
Easy Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, the "ATT" indicator blinks. Loudness Compensating for low and high tones during low volume. Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON. System Q You can recall the best sound setting preset for different types of the music.
English General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the below. Speaker type OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in.
Tuner features 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. FM AM 4 ¢ TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. SRC Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
English Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON. Auto Memory Entry Putting a station with good reception in the memory automatically.
RDS features Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1] — [#6] button.
English RDS features Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. When it's ON, "TI" indicator is ON. When a traffic information station isn't being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed it and it switches to traffic information.
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary calling it up quickly. "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT" Presetting the Program Type Exit PTY mode Press the [PTY] button for at least 1 second. Program Type preset 2 Preset the Program Type Press the [#1] — [#6] button for at least 2 seconds.
English CD/External disc control features AM/ DISC0 FM/ DISC+ 4 ¢ Playing CD When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator is ON. Eject the CD Press the [0] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. SRC SCAN REP SCRL RDM M.RDM MENU Function of the KDC-4024/KDC-4024V Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
shown below. Repeat play Track Repeat Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Album Repeat (Function of disc changer) OFF Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Display "REP ON"/ "TREP ON" "DREP ON" "REP OFF" Track Scan Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to.
English CD/External disc control features Function of the KDC-4024/KDC-4024V 6 Select the characters Press the [FM] or [AM] button. 7 8 Repeat steps 5 through 6 and attach a name. Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "MRDM ON" is displayed. Exit Menu mode Press the [MENU] button.
Menu system Menu System FM AM 4 ¢ Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Press the [4] or [¢] button.
English Menu system Touch Sensor Tone Synchronize Clock Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Synchronizing the RDS station time data and this unit's clock. Setting Beep is heard. Beep canceled. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. It takes 3 to 4 minutes to synchronize the clock. Manual Clock Adjustment This adjustment can be done when the (page 18) is set as OFF.
News Bulletin with Timeout Setting Tuning Mode It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. Sets the tuning mode. Tuning mode Display Auto seek "AUTO 1" Preset station seek "AUTO 2" Display and Setting "NEWS OFF" "NEWS 00M" … Manual Operation Automatic search for a station. Search in order of the stations in the Preset memory. "MANUAL" Normal manual tuning control.
English Menu system AF (Alternative Frequency) When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF.
Function of the KDC-4024/KDC-4024V Disc Naming For the setting method refer to the (page 16). Power OFF Timer Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power. Display "OFF – – –" "OFF 20M" (Original setting) "OFF 40M" "OFF 60M" Setting Power OFF Timer function is OFF. Turns the power OFF after 20 minutes. Turns the power OFF after 40 minutes.
English Accessories External view Number of items 1 ..........................................1 2 ..........................................2 3 ..........................................1 The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2.
Connecting Wires to Terminals 10 Rear left output (White) Rear right output (Red) 4 Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 2 KENWOOD disc changer input (KDC-4024/4024V only) 14 To connect the Disc changer, consult your Disc changer manual.
English Connecting Wires to Terminals 2WARNING Installation Connecting the ISO Connector (see p.23) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
■ Removing the hard rubber frame ■ Removing the Unit 1 1 Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame. 2 3 Remove the screw (M4×8) on the back panel. Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Catch Insert the two removal tools deeply into the slots on each side, as shown.
English Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? ? Nothing happens when the buttons are pressed.04 ✔ The computer chip in the unit is not functioning normally. ☞ Press the reset button on the unit (page 4). ? There’s a source you can’t switch.06 ✔ There’s no CD inserted. ☞ Set the media you want to listen to.
Disc source ? "AUX" is displayed without achieving External disc control mode.50 ✔ Unsupported disc changer is connected.51 ☞ Use the disc changer mentioned in the IMPORTANT INFORMATION of the section on (page 3). ? The specified disc does not play, but another one plays instead.52 ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The CD is upside-down.53 ☞ Load the CD with the labeled side up. ? Can’t remove disc.
English Troubleshooting Guide The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine.E02 ➪ Load a disc into the disc magazine. E-04: No disc has been loaded in the disc magazine.E04 ➪ Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down.
Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) .................................0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) ..............................1.6 µV/75 Ω Frequency response (±3 dB) .................................30 Hz – 15 kHz Signal to Noise ratio (MONO) ..............................................65 dB Selectivity (DIN) (±400 kHz)............
