Owner's Manual

ENGLISH
19
BLUETOOTH®
Other settings
1
Press FNC to enter [ FUNCTION ].
2 Turn the volume knob to make a selection (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated
on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
•
You can only connect another Bluetooth device by disconnecting the connected Bluetooth device
first.
“
*
” disappears when disconnected.
AUDIO SELECT
DEVICE DELETE
1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [ YES ] or [ NO ], then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT ON :The unit automatically reconnect when the last connected Bluetooth device is within range.;
OFF :Cancels.
AUTO PAIRING ON :The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device)
when it is connected through USB input terminal.Depending on the operating system of the
connected device, this function may not work. ;
OFF :Cancels.
INITIALIZE YES :Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;
NO :Cancels.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number
buttons (1to6).
1 Press to enter Bluetooth
mode.
2 Turn the volume knob to select [ CALL HISTORY ],
[
PHONE BOOK ], or [ NUMBER DIAL ], then press the
knob.
3 Turn the volume knob to select a contact or
enter a phone number.
If a contact is selected, press the volume knob
to show the phone number.
4 Press and hold one of the number buttons (1
to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select
[
NUMBER DIAL ] in step 2 and store a blank number.
Make a call from memory
1
Press to enter Bluetooth
mode.
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contacts
stored.
JS_KWD_DPX791BH_DPX501BT_KN_EN_1.indd 19 7/10/2014 5:00:50 PM