DPX791BH DPX501BT DUAL DIN SIZED CD RECEIVER INSTRUCTION MANUAL RECEPTEUR CD FORMAT DUAL DIN MODE D’EMPLOI RECEPTOR DUAL DE CD TAMAÑO DIN MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Dual Din Sized CD Receiver.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice CAUTION This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 RADIO 5 CD / USB / iPod / ANDROID 7 AUX 9 Pandora® 10 iHeartRadio® 11 SiriusXM® Radio 12 BLUETOOTH® 15 AUDIO SETTINGS 21 DISPLAY SETTINGS 23 MORE INFORMATION 23 TROUBLESHOOTING 25 SPECIFICATIONS 28 INSTALLATION / CONNECTION 29 How to read this manual • Operations are explained mainly using buttons on the faceplate. • [XX] indicates the selected items. • ( XX) indicates references are available on the stated page.
BASICS Faceplate Remote control (RC-406) Loading slot Display window Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. How to replace the battery Volume knob (turn/press) Reset button • Your preset adjustments will also be erased. To On the faceplate On the remote control Turn on the power . Press • Press and hold to turn off the power. Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power.
GETTING STARTED 3 Set the initial settings repeatedly to enter STANDBY. 1 Press 2 Press FNC to enter [FUNCTION]. • Pressing AUDIO enter [AUDIO CONTROL] directly. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit. .
GETTING STARTED RADIO SYSTEM For : You can tune in to conventional broadcasts only. For : You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10) IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
RADIO Default: XX Select an HD Radio multicast channel (for ) Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels.... Press S / T to select your desired channel (HD1 to HD8). “LINKING” appears while linking to a multicast channel. Direct Access Tuning (using RC-406) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a frequency or channel.
CD / USB / iPod / ANDROID Start playback The source changes automatically and playback starts. Label side M Eject disc USB input terminal USB CA-U1EX (max.: 500 mA) (optional accessory) To On the faceplate On the remote control Playback / pause Press Press iPod/iPhone Reverse / Fast-forward*4 Press and hold S / T. Press and hold S / Select a track/file Press S / T. Press S / Select a folder*5 Press Press Repeat play*6 Press repeatedly.
CD / USB / iPod / ANDROID To On the faceplate Select control mode repeatedly. While in iPod source, press 9 MODE ON : Control from the iPod* MODE OFF : Control from the unit While in ANDROID source, ( 9, [ANDROID SETUP]) Select music drive ( 9, [MUSIC DRIVE]) Select a file from a folder/list . 1 Press 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. Quick Search If you have many files, you can search through them quickly.
CD / USB / iPod / ANDROID AUX Direct Music Search (using RC-406) 1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press to search for music. Preparation: Select [ON] for [BUILT-IN AUX]. ( 5) Start listening 1 Connect a portable audio player (commercially available). or DIRECT. • To cancel, press • Not available if Random Play is selected. • Not applicable for iPod, ANDROID, KME Light/ KMC file.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC]. ( 5) Create and save a new station 1 Press and hold FNC. 2 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then Start listening 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. press the knob. A new station is created based on the current song or artist.
iHeartRadio® Preparation: Install the latest version of iHeart Link for KENWOOD application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC]. ( 5) Search for a station . 1 Press 2 Turn the volume knob to select a category, then press the Start listening 1 Open the iHeart Link application on your device. 2 Connect your device to the USB input terminal. 3 Turn the volume knob to the desired station, then press the knob. knob.
SiriusXM® Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio SiriusXM Keymode SmartFavorites and TuneStart™ Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode) “ ” lights up when replay keymode is selected. When channel keymode is selected... To On the faceplate On the remote control Select a channel Press S / T. Press S / Change a channel rapidly Press and hold S / T. Press and hold S / . Store a channel of the current band Press and hold one of the number buttons (1 to 6).
SiriusXM® Radio SiriusXM settings 1 Press FNC to enter [FUNCTION]. 2 Turn the volume knob to select [SIRIUS XM], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press and hold to exit. . To return to the previous setting item, press CHANNEL LOCK To unlock settings: 1 Turn the volume knob to select a number.
BLUETOOTH® BLUETOOTH — Connection Pair a Bluetooth device Supported Bluetooth profiles – Hands-Free Profile (HFP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) – aptX Codec (aptX) (for ) Connect the microphone MIC (Microphone input terminal) Microphone (supplied) Rear panel Adjust the microphone angle When connecting
BLUETOOTH® BLUETOOTH — Mobile phone Improve the voice quality While talking on the phone... 1 Press FNC to enter [FUNCTION]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. . To return to the previous setting item, press Default: XX MIC GAIN –10 — +10 (–4): The sensitivity of the microphone increases as the number increased.
BLUETOOTH® Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: XX SETTINGS AUTO ANSWER 1 — 30: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels.
BLUETOOTH® PHONE BOOK 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), turn the volume knob. • To select the desired first letter, press S / T, then press the knob. Select “1” to search with numbers and select “ ” to search with symbols. 2 Turn the volume knob to select a name, then press the knob.
BLUETOOTH® Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number. 4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.
BLUETOOTH® BLUETOOTH — Audio Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears. 2 Search and select this unit model name (DPX7 BH/ DPX5 BT) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display. ** ** The connectivity result (OK or NG) appears after the test.
BLUETOOTH® Internet radio via Bluetooth Listen to Pandora Preparation: Select [ON] for [PANDORA SRC]. ( 5) You can listen to Pandora on your smart phone (Android OS) through Bluetooth on this unit. 1 Open the Pandora application on your device. 2 Connect your Bluetooth audio player via Bluetooth connection. ( 15) 3 Press repeatedly to select PANDORA. The source switches and broadcast starts automatically. You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUDIO SETTINGS EQ PRO (for BASS ADJUST MID ADJUST TRE ADJUST PRESET EQ ) For BASS CTR FRQ 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency. BASS LEVEL –8 to +8 (+6): Adjusts the level. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor. LPF SUBWOOFER BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels. THROUGH: All signals are sent to the subwoofer.
DISPLAY SETTINGS MORE INFORMATION 1 Press FNC to enter [FUNCTION]. 2 Turn the volume knob to select [DISPLAY], then press the knob. 3 Turn the volume knob to make a selection (see the following table), General • This unit can only play the following CDs: then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press and hold to exit. To return to the previous setting item, press .
MORE INFORMATION About KENWOOD Music Editor Light and KENWOOD Music Control • This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control. • When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs. • KENWOOD Music Editor Light and KENWOOD Music Control are available on the following web site: www.kenwood.
TROUBLESHOOTING Remedy Symptom Remedy • Adjust the volume to the optimum level. • Check the cords and connections. “PLEASE EJECT” Reset the unit. If this does not solve the problem, consult your nearest service center. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “READ ERROR” Copy the files and folders onto the USB device again.
TROUBLESHOOTING Playback is intermittent or sound skips. Turn off the power saving mode on the Android device. “ANDROID ERROR” / “NA DEVICE” • Reconnect the Android device. • Restart the Android device. “ADD ERROR” / “SEARCH ERROR” New station creation is unsuccessful. “CHECK DEVICE” Check the Pandora application on your device. “NO SKIPS” The skip limit has been reached. “NO STATIONS” No stations are found. “STATION LIMIT” The number of registered stations has reached its limit.
TROUBLESHOOTING Bluetooth® Symptom Remedy Symptom Remedy • Search from the Bluetooth device again. • Reset the unit. ( 3) “DEVICE FULL” The number of registered devices has reached its limit. Retry after deleting an unnecessary device. ( 19, DEVICE DELETE) Bluetooth pairing cannot be made. • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
SPECIFICATIONS 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) HD Radio Broadcast: 20 Hz — 20 kHz Conventional Broadcast: 30 Hz — 15 kHz AM Frequency Range : 110 dB : 105 dB Dynamic Range 90 dB Channel Separation 85 dB MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio AAC Decode AAC-LC “.
INSTALLATION / CONNECTION SPECIFICATIONS Warning Maximum Output Power 50 W × 4 Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Speaker Impedance 4Ω—8Ω Tone Action : Audio Band 1: Band 2: Band 3: Band 4: Band 5: 100 Hz ±8 dB 315 Hz ±8 dB 1 kHz ±8 dB 4 kHz ±8 dB 12.5 kHz ±8 dB : Bass: Middle: Treble: General Auxiliary Preout Level/Load (CD) 200 Hz ±8 dB 2.5 kHz ±8 dB 12.
INSTALLATION / CONNECTION Installing the unit (in-dash mounting) Do the required wiring ( 31) Bend the appropriate tabs to hold the mounting sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available).
INSTALLATION / CONNECTION Wiring connection When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
MILITARY Units purchased through the U.S.A. military exchange service LIMITATION OF IMPLIED WARRANTIES overseas may be serviced under warranty in the continental U.S.A., subject to lh.efollowing conditions 1) The original warranty is in effect 2) Proal ol purchase is provided to the servicer. WARRANTY FOR MILITARY MARKET Kenwood corporation is proud olthe quality and workmanship of its audio equipment. This unit has been properly designed. tested and inspected before it was shipped to you.
U.S.A. KENWOOD USA CORPORATION This warranty will be honored only in the U.S.A. EXCLUSION OF DAMAGES KENWOOD WARRANTY This warranty is enforceable only by the original purchaser. KENWOOD'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITEDTOTHEREPI>JRORREPlACEMENTOFTHEPRODUCT AT OUROPTION KENWOODSHALL NOT BE LIABLEFOR· 1.