DUAL DIN SIZED CD RECEIVER DPX-MP6110U INSTRUCTION MANUAL © B64-4231-00/00 (MW) B64-4231-00_00_DPXMP6110_e.indd 1 08.7.
Contents Before use Basic Operation 3 4 General functions Tuner functions Disc & Audio file play functions TV control (Optional) 21 Basic Operation Preset Memory Preset Tuning Direct TV Tuning Basic Operations of remote control 22 Function Control 6 Display Settings 8 Appendix Accessories/ Installation Procedure 26 About Display Type Text Display Selection Illumination Color Selection Illumination Color Preset Memory Illumination Color Preset Recall Auxiliary Input Display Setting Station/Disc
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 16). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.
Basic Operation [ ] Disc slot [SRC] [FNC] [AUTO] Control knob [AUD] [ATT] [1]—[6] General functions Power/Source Select button : [SRC] Turns on the power. When the power is ON, select a source. SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward left or right. To determine the selected source, press the Control knob. SRC Select mode 2: Pressing this button each time switches between sources.
Text/Title scroll : Control knob Scrolls the CD and audio file text display when pushing toward up for at least 2 seconds. Tuner functions Band select : Control knob Switches between FM1, FM2, and FM3 each time pushing toward up. Switches to AM when pushing toward down. Tuning : Control knob Changes the frequency when pushing toward left or right. ⁄ • During reception of stereo stations the “ST” indicator is ON. Tuning mode select : [AUTO] Switches as follows each time this button is pressed.
Function Control Functions in the table below can be set up by using Function Control. Category Item MENU “Security Set”/ “Security Clear” “SRC Select” Setting “1”*/ “2” Sets the source selection method. 24 “OFF”/ “ON”* 12 “AT COL CHG” “OFF”/ “iPod”* “Beep” “OFF”/ “ON”* When set to “ON”, allows you to select music in the manner similar to that of the iPod. When the iPod source is used, sets whether the illumination color is changed by the iPod.
Category Item Setting “S-CTRL” “EQ” “POSIT” “LOUD” “OFF”*/ “ON” “PRESET” DISP “TYPE” “GRAPH” “SIDE” A/ B/ C/ D Spectrum Analyzer 1 – 2 Text icon/ Source icon/ OFF “TEXT” Color P.MEM SCAN*1 “ON”/ — RDM FiREP FoREP SCAN “ON”/ — “ON”/ — “ON”/ — “ON”/ — RDM M.RDM “ON”/ — “ON”/ — T.REP D.REP “ON”/ — “ON”/ — Entry Setting overview Sets the sound quality. Compensates the sound environment in accordance with the listening position. Compensates high and low pitch sound at lower volume.
Display Settings Function Control 1 Enter Function Control mode About Display Type Press the [FNC] button. Function icon is displayed. Shown below are examples of display types. Display “TYPE [A]” 2 Select your desired setup item Operation type Movement between items Selection of item Return to previous item Operation Turn the Control knob. Press the Control knob. Press the [FNC] button or “ “TYPE [B]” ” icon.
In Audio file source Information Music title & Artist name Album name & Artist name Folder name File name Play time & Music number Spectrum Analyzer & Clock Date Blank Illumination Color Selection Display “Title/Artist”/”TITLE” “Album/Artist”/”ALBUM” “Folder Name”/”FOLDER” “File Name”/”FILE” “P-Time”/”P-TIME” “Speana/Clock”/”SPEANA” “Date”/”DATE” “Blank”/”BLANK” In Standby Information Standby Clock Date Blank Display “Source Name”/”SRC NAME” “Clock”/”CLOCK” “Date”/”DATE” “Blank”/”BLANK” In Auxiliary inp
Display Settings Illumination Color Preset Memory Auxiliary Input Display Setting Saving the combination of the Illumination Colors selected for each place. The memory cannot be erased by the Reset button. Selects the display below when changing to Auxiliary input source. 1 Set the Illumination Color for each place Refer to (page 9). 2 Enter Illumination Color Preset Memory mode Select “COLOR” > “PRESET” > “MEMO”.
Station/Disc Naming (SNPS/DNPS) Opening message edit Attaching a title to a Station or CD. Setting the opening message to be displayed when the power is turned on. 1 Receive/play the station/disc you want to 1 Select Opening message edit item during attach a title to 2 Select Name set mode item during Menu mode Select the “Name Set” display. For how to select Function Control items, refer to (page 6). Press the Control knob for at least 1 second.
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the device or media being played now. Searchs the music by entering the track number. 1 Enter Music Select mode Turn the Control knob. The music list is displayed. 2 Search for music Press the number buttons on the remote control. 2 Search the music Press the [4] or [¢] button.
Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD Changer” display. For how to select source item, refer to of (page 4). Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button.
Tuner Operation Station Preset Memory Function of remote control Putting a station in the memory. Direct Access Tuning 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode Select “P.MEM”. For how to select Function Control item, refer to (page 6). 3 Select the number to put in the memory Turn the Control knob. 4 Determine the number to put in the memory Press the Control knob.
Other Functions Activating Security Code Deactivating Security Code ⁄ To deactivate the Security Code function. • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security Code item during Menu 1 Select Security Code item during Menu mode (In Standby mode) “Security Set” is displayed. For how to select Function Control items, refer to (page 6).
Other Functions Manual Clock Adjustment Demonstration mode setting 1 Select Clock Adjustment item during Menu Turning the demonstration mode ON/OFF. mode Select the “Clock Adjust” display. For how to select Function Control items, refer to (page 6). 2 Enter Clock adjustment mode Press the Control knob for at least 1 second. The clock display blinks.
Audio Adjustments 2 Select the speaker you want to set Cabin selection You can compensate the delay of the sound arrival time, which is caused by the installation position of the speakers, by selecting your environment from the following car types; Car type (rear speaker position) Not compensating.
Audio Adjustments Equalizer Control ⁄ You can adjust following Equalizer Control items ; • When you set the Bass Extend to ON, low frequency response is extended by 20%.
Manual position setting Making fine adjustment of the value specified at Preset position selection per speaker. 1 Enter Position setting mode Select “SOUND” > “S-CTRL” > “POSIT” > “M-POSI”. For how to select Function Control item, refer to (page 6).
Audio Adjustments Audio Control Audio Setup You can adjust following Audio Control items ; You can set Sound system , such as follows; Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Balance “BALANCE” Left 15 — Right 15 Fader “FADER” Rear 15 — Front 15 Exit Audio Control mode (Volume control mode) 1 Select the source to adjust For how to select source item, refer to of (page 4). 2 Enter Audio Control mode Press the [AUD] knob.
TV control (Optional) Basic Operation Selecting TV source Press the [SRC] button. Select the “TV” display. For how to select source item, refer to of (page 4). Select the TV band and Video input Push the Control knob toward up. Each time you push the knob, TV bands and Video input alternate. Select the TV channel Push the Control knob towards right or left. Preset Memory Press the desired [1] — [6] button for at least 2 seconds.
Basic Operations of remote control In Tuner source SRC VOL SRC ATT ATT Band select [FM]/[AM] VOL AUD AUD Station select [4]/[¢] [1] — [6] Recall preset stations FM/AM DIRECT 2-ZONE (page 14, 21) 0—9 In CD/USB source Music select [4]/[¢] [FM]/[AM] Folder/Disc select Pause/Play [38] In TV source General control Band/Video input select Volume control Source select Channel select [VOL] Volume reduce [ATT] About [ ] This button is used when Bluetooth HANDS FREE BOX is connected.
Appendix About Audio file About USB device • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
Appendix For operating KCA-BT100 (Optional) Function Control Glossary However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. 1–3. Operation is the same. Refer to the instruction manual of KCA-BT100. 4. Press the Control knob. 5. Select “YES” using the Control knob. 6. Press the Control knob. 7. Press the [FNC] button.
• DISP REVERSE Switches the panel display between positive or negative. In addition, you can reverse it in conjunction with the interior light. POSI 1 : Displays the text in the positive. POSI 2 : When the interior light is off, the text is displayed in the positive; when the interior light is on, the text is displayed in the negative. NEGA 1 : Displays the text in the negative.
Accessories/ Installation Procedure ¤ Accessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6.
Connecting Wires to Terminals Steering remote control (Light Blue/Yellow) To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matches your car is required. REMO.CONT FM/AM antenna input Front preout Fuse (10A) Rear/SubWoofer preout To Kenwood disc changer/ External optional accessory To connect these leads, refer to the relevant instruction manuals.
Installation/Removing the Unit Installation Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. Car Bracket Accessory3 (M5 × 7 mm) or Accessory4(M5 × 6 mm) Accessory2 (Only for NISSAN car) 28 | DPX-MP6110U B64-4231-00_00_DPXMP6110_e.indd 28 08.7.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. • Cannot set up the subwoofer position of Manual position setting. ▲ • Preout is not set to subwoofer. ☞ “MENU” > “SWPRE” of (page 6) • of (page 4) is not set to On. • The Dual zone function is enabled.
Troubleshooting Guide The messages shown below display your systems condition. TOC Error: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. Error 05: The disc is unreadable. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “Error 77” code does not disappear, consult your nearest service center. Mecha Error/ Mecha ERR: Something is wrong with the disc magazine.
Specifications FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.
B64-4231-00_00_DPXMP6110_e.indd 32 08.7.
