DNX997XR DNX697S DNX577S GPS NAVIGATION SYSTEM INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . • The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference. Take the time to read through this instruction manual.
Important Notice on Software ÑÑSoftware License on This Product The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties.
Article 3 (Terms of License) 1. I n assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement. 2.
Contents Before Use 6 APPS 36 Precautions.................................................................... 6 Wireless Mirroring Operation................................36 Safety Precautions and Important Information................................ 7 USB Mirroring Operation........................................36 How to read this manual.......................................... 8 Android Auto™ Operation......................................
SiriusXM® 60 Controlling Audio 95 SiriusXM® Basic Operation.....................................60 3-way speaker system setup.................................95 Storing Channels in Preset Memory...................62 Speaker / X’over setup.............................................96 Preset select................................................................62 Controlling General Audio.....................................98 Direct search.......................................................
Before Use Before Use Precautions # WARNINGS ÑÑTo prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metallic tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your KENWOOD dealer.
Before Use ÑÑAcquiring GPS signal The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
Before Use # CAUTION Failure to avoid the following potentially hazardous situations may result in injury or property damage. The navigation system is designed to provide you with route suggestions. It does not reflect road closures or road conditions, weather conditions, or other factors that may affect safety or timing while driving. Use the navigation system only as a navigational aid.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel DNX997XR 8 9 1 2 DNX697S / DNX577S 10 3 4 5 8 6 7 1 4 2 3 5 6 English 9
Basic Operations NOTE • The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual panels. Number Name Remote Sensor • Receives the remote control signal. 2 S, R (Volume) • Adjusts the volume. The volume will go up to 15 when you keep pressing R. (P.13) 3 NAV/[ ] • Displays the navigation screen. • Pressing and holding switches view camera display on/off.
Basic Operations Turning on the Unit The method of turning on is different depending on the model. 1 Press the [HOME]/[ ] button. DNX997XR DNX697S / DNX577S hh The unit is turned on. ●● To turn off the unit: 1 Press the [HOME]/[ ] button for 1 second. NOTE • If it is your first time to turn the unit on after installation, it will be necessary to perform Initial SETUP (P.12).
Basic Operations Initial Settings (DNX997XR only) 5 Touch [Display Adjustment]. 6 Adjust a viewing angle and a tilt position. 7 Touch [ ]. For details, see Display Adjustment (P.14). Initial SETUP Perform this setup when you use this unit first time. 1 Set each item as follows. (DNX697S / DNX577S only) 5 Touch [Viewing Angle]. 6 Select a viewing angle. 7 Touch [ ]. For details, see Viewing Angle (P.14). For details, see Display Setup (P.92). ■■ [Camera] Set the parameters for the camera.
Basic Operations Calendar/clock settings 1 Press the [MENU]/[ ] button. hh Popup menu appears. 2 Touch [SETUP]. hh SETUP Menu screen appears. 3 Touch [User Interface]. NOTE • Please set the date and time. If they are not set, some functions may not work. Adjusting the volume You can adjust the volume (0 to 40). Press [R] to increase, and press [S] to decrease. Holding [R] increases the volume continuously to level 15. DNX997XR DNX697S / DNX577S hh User Interface screen appears.
Basic Operations Display Adjustment (DNX997XR) 1 Viewing Angle (DNX697S / DNX577S) Press the [G] button. hh Display Adjustment screen appears. 1 2 3 You can adjust the viewing angle when the image on the screen is difficult to see evenly. The smaller the (negative) value, the more whitish the image on the screen looks. 1 Press the [ ] button. hh Popup menu appears. 2 Touch [SETUP]. 3 Touch [Display].
Basic Operations Touch screen operations To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display a setting menu screen or change pages. HOME screen descriptions Most functions can be performed from the HOME screen. 1 ●● Touch Touch the screen gently to select an item on the screen. ●● Touch and hold Touch the screen and keep your finger in place until the display changes or a message is displayed.
Basic Operations Popup menu • Short-cut source icons: The source changes to the one you have set with a short-cut. For the short-cut setting, refer to Customize Short-cut source icons on HOME screen (P.18). 1 1 Press the [MENU]/[ ] button. hh Popup menu appears. 2 Touch to display the popup menu. DNX997XR Turn off the screen 1 Select [Display OFF] on the popup menu. NOTE 1 • Touch the display to turn on the screen.
Basic Operations Select the playback source 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 Touch [ ]. From the screen, you can select the following sources and functions. • Displays the navigation screen. (P.20) • Switches to the Apple CarPlay screen from the connected iPhone. (P.38) • Switches to the Android Auto screen from the connected Android smartphone. (P.41) • Displays the Audio screen. (P.95) • Puts the unit in standby. (P.
Basic Operations To select the playback source on the source control screen Customize Short-cut source icons on HOME screen You can arrange the positions of the source icons as you like. Display source selection icons by touching [ ]/[ ] or flicking left or right on the source control screen, then select a playback source. 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 Touch [ 3 Touch and hold the icon which you want to move in the customizing mode.
Basic Operations Source control screen descriptions 4 • Connected Bluetooth device information. 5 Artwork & information There are some functions which can be performed from most screens. You can select whether to display an artwork and song information or only song information in more detail. Touching the artwork area switches to the VU meter.
Basic Operations List screen 5 [ There are some common function keys in the list screens of most sources. See (P.33, 47, 49, 77). ] Page scroll NOTE • Depending on the current source or mode, some function key may not appear. Touch [1] or the item listed on the information area in the source control screen. hh The list screen appears. Navigation Operation For Bluetooth audio: For details on the navigation function, please refer to the Navigation Instruction Manual. Touch [1].
Basic Operations How to Use the Navigation System 1 NOTE • To enter letters contained in the name, touch the Search bar and enter the letters. Operate the desired function from the Main Menu screen. 1 3 2 3 4 5 1 GPS and GLONASS signal status. 2 Finds a destination. 3 Views the map. 4 Uses the Apps such as ecoRoute and Help. 5 Adjusts the settings. NOTE • GLONASS reception is not available on all device models.
Basic Operations 2 From the Map Updates section, select Update 3 Follow the on-screen instructions. NOTE • Touch and drag the map to view a different area of the map. • A speed limit icon could appear as you travel on major roadways. ●● Adding a stop ] and 1 While navigating a route, touch [ then touch [Where To?]. 2 Search for the extra stop. 3 Touch [Go!]. 4 Touch [Add to Active Route] to add this stop before your final destination. ●● Taking a detour 1 While navigating a route, touch [ 2 Touch [ ].
Basic Operations Displays the navigation and view camera display. Returns to the full navigation screen. NOTE • For details on control keys, refer to the instructions in each section. • Touching the source icon at the bottom of the screen displays the full audio screen. During video playback, touching the viewing area displays operation keys. • During camera view display, touching the viewing area switches to the view cameras set in the camera assignment settings. (P.
Basic Operations KENWOOD Traffic Powered By INRIX 2 You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation DNX697S / DNX577S • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android smartphone.
Widget Widget Widget 1 2 Press the [HOME]/[ ] button. You can change the widget by flicking left or right on the widget area. Multi Widget You can place a widget on each of the following areas. Up to 4 widgets can be placed per a multi widget screen. 1 2 Press the [HOME]/[ ] button. Flick the widget area to the left/right to display the multi widget.
Widget ●● To replace the widget 1 Touch [ ] on the multi widget screen. 1 *5 You cannot play the video file on the USB/SD/Disc media when using Wireless Mirroring (DNX997XR only)/USB Mirroring. *6 This can be selected when a compatible ADS adapter is connected. NOTE • [ ] and the widget list popup disappear when no operation is done for 5 seconds. • When the screen is switched from another widget to multi widget screen, [ ] appears again. hh Widget list popup appears.
Widget Weather Widget You can display the weather forecast of the present location on the Home screen. Preparation • See KENWOOD Traffic Powered By INRIX (P.24). • Select “ON” for Weather Widget. See Widget SETUP (P.28). 1 2 Press the [HOME]/[ ] button. Flick the widget area to the left/right to display the weather widget. Photo Frame Widget You can display a slideshow of the image files stored in the USB memory/SD card on the Home screen. ÑÑPreparation • Select “ON” for Photo Frame Widget.
Widget Widget SETUP To Photo Frame Setup Set up the widgets on the Home screen. Make settings related to display of the photo frame widget. 1 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP screen appears. 2 5 Touch [User Interface]. ■■ [Slide Show Interval] Specify the slideshow interval. "5" to "30" seconds. Default is "5" seconds. Touch [Widget SETUP] in the User Interface screen. Set each item as follows.
Disc Disc Playing a disc ÑÑInsert a disc DNX997XR 1 Press the [G] button. ÑÑEject a disc DNX997XR 1 2 3 2 3 Touch [DISC EJECT]. hh The panel opens. Insert the disc into the slot. Press the [G] button. Touch [DISC EJECT]. When removing a disc, pull it horizontally. Press the [G] button. hh The panel closes. NOTE • To forcibly eject the disc, press and hold the [G] button for 2 seconds and then touch [DISC EJECT] after the message is displayed.
Disc DVD/VCD Basic Operation • Linear PCM, etc.: Audio format • OFF/Zoom2 – 4 (DVD)/Zoom2 (VCD): Displays the zoom ratio. This function can be used from the remote control. (P.104) • [Hide]: Hides the control screen. •[ ] : Repeats the current content.
Disc 4 Operation keys • [E] [F] : Searches for the previous/next content. Touch and hold to fast-forward or fastbackward the disc. (It will be cancelled automatically after about 50 seconds.) • [DH] : Plays or pauses. •[ ] : Displays the Graphic Equalizer screen. (P.98) 5 Indicator Items • [IN]: Disc insertion status. White: A Disc is inside the unit. Orange: Disc player failure. VCD • [1chLL/2chLL]: Identifies the left audio output of channel 1 or 2.
Disc •[ ] : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; Track/File repeat ( ), Folder repeat ( ) (Disc media only), Repeat all ( ) •[ ] : Randomly plays all tracks in current folder/disc. Each time you touch the key, random mode switches in the following sequence; Track random ( ) (Music CD only), Folder ) (Disc media only), Random off random ( ( ) 2 Track information • Displays the information of the current track/file.
Disc File search Operation (Disc media only) You can search for a file according to hierarchy. NOTE DVD Disc Menu Operation You can set up some functions using the DVDVIDEO disc menu. 1 Touch the framed area during playback. • For operations in the list screen, see List screen (P.20). 1 2 Touch [1]. hh Folder List screen appears. Touch the desired folder. hh Menu Control screen appears. 2 Perform your desired operation as follows. hh When you touch a folder its contents are displayed.
Disc ■■ To switch among picture angles Touch [Angle]. Each time you touch this key, picture angles are switched. * These keys may not function depending on the disc. DVD SETUP You can set up the DVD playback functions. 1 Touch the framed area during playback. ÑÑHighlight control Highlight control lets you control the DVD menu by touching the menu key directly on the screen. 1 2 Touch [Highlight] on the Menu Control screen. 2 Touch your desired item on the screen.
Disc ■■ [Screen Ratio] Sets the screen display mode. [16:9 ](Default): Displays wide pictures. [4:3 LB]: Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). [4:3 PS]: Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). ÑÑLanguage setup This setting is for the languages used for the menu, subtitle, and voice. 1 2 Touch the desired item; [Menu Language], [Subtitle Language], [Audio Language].
APPS APPS Wireless Mirroring Operation (DNX997XR) You can display the same screen of the Android smartphone on the monitor of the unit using the Wireless Mirroring function of the Android smartphone. Preparation • You can use the Wireless Mirroring function with Android smartphones compatible with this function. • This function may be called Wireless Display, Screen Mirroring, AllShare Cast, etc., depending on the manufacturer. • The settings on the Android smartphone differ depending on the device type.
APPS 2 3 4 5 Press the [HOME]/[ ] button. NOTE Touch [ • USB (Gray) terminal does not support USB Mirroring. (DNX997XR / DNX697S only) • You cannot use the Bluetooth and iPod sources at the same time with Mirroring for KENWOOD application. • OSD clock is not shown on the mirroring screen of this unit regardless of the setting made for [OSD Clock] (P.92).
APPS ÑÑConnecting an iPhone NOTE • These keys differ depending on the connected device and may differ from the function operated from the device. • These keys can be displayed even if there is no hard key on the connected device. ÑÑDisconnect mirroring You can disconnect mirroring by disconnecting your smartphone from the USB (Black) terminal from the rear panel. NOTE • Once you disconnect from mirroring operations, stop broadcast on iPhone's screen recording function.
APPS NOTE • Turn on the Bluetooth function and Wi-Fi function of an iPhone. • If two or more iPhones have been registered, select the iPhone to be used as the [Apple CarPlay] source. (P.39) • You can also select the iPhone registered in [Apple CarPlay Device List] (P.39) even when the [Apple CarPlay] icon is not activated on the source selection screen. • It is necessary to connect the GPS antenna and the speed pulse input in order to use a wireless Apple CarPlay.
APPS To delete the registered Apple CarPlay device 1 2 Touch [ ÑÑOperation keys and available Apps on the home screen of Apple CarPlay ]. Touch the device name to check. You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter the Apple CarPlay mode, touch [Apple CarPlay] icon on the source selection screen. (P.17) 2 ■■ [þ [ALL] Selects all Apple CarPlay devices. ■■ [¨ [ALL] Clears all check marks.
APPS DNX697S / DNX577S Press for 1 second 2 Talk to Siri. Press the [ ] button. ÑÑSwitch to the Apple CarPlay screen while listening to another source 1 Press the [ Android Auto enables you to use the functions of your Android smartphone convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android smartphone while driving. For details about Android Auto, visit https:// www.android.com/auto/ and https://support. google.
APPS 2 3 4 5 Unlock your Android smartphone. 5 Touch [ ]. Press the [HOME]/[ ] button. Touch [ ]. Touch [Android Auto]. (P.17) Wireless connection (DNX997XR) When the Android smartphone is ready for wireless connection, connecting it via the USB registers Bluetooth and Wi-Fi automatically. Thus, the registered Android smartphone will be able to be connected wirelessly to be used as an Android Auto source. 1 2 3 6 Press the [HOME] button. Touch [ Select an Android smartphone.
APPS ÑÑUsing voice control 1 Press the [ ] button for 1 second. DNX997XR Press for 1 second DNX697S / DNX577S Press for 1 second To cancel 1 Press the [ ] button. ÑÑSwitch to the Android Auto screen while listening to another source 1 Press the [ ] button. DNX997XR DNX697S / DNX577S NOTE • When listening to another source with the Android Auto screen displayed, playing music in the Android Auto mode will switch the current source to the Android Auto source.
USB/SD USB/SD Connecting a USB device 1 2 3 4 Connect the USB device with the USB cable. (P.114) DNX997XR 1 2 3 Press the [HOME]/[ ] button. Touch [ Inserting the SD Press the [G] button. Touch [OPEN] to the panel fully opens. Insert the SD card into the slot until it clicks. ]. Touch [USB]. (P.17) ÑÑDisconnect the USB device 1 2 3 Press the [HOME]/[ ] button. Touch a source other than [USB]. Detach the USB device.
USB/SD ÑÑRemove the SD card DNX997XR 1 2 3 4 Press the [G] button. Touch [OPEN] to the panel fully opens. Push the SD card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers. Press the [G] button. DNX697S / DNX577S Push the microSD card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
USB/SD 2 Track information 8 Indicator Items • Displays the information on the current file. Only a file name and a folder name are displayed if there is no tag information. • Change the text size of the information smaller when the "Small Audio Text" is set to "ON" in the User Interface screen (P.90). • [VIDEO]: Identifies the video file. • [MUSIC]: Identifies the music file. 3 Play mode indicator/Playing time • D, B, etc.
USB/SD Search Operation You can search music or video files by the following operations. 1 2 3 Touch [1]. Touch [S]. ÑÑLink search You can search for a file of the same artist/ album/genre as that in the current track. 1 2 • For operations on the list screen, see List screen (P.20). ÑÑCategory search You can search for a file by selecting a category. 3 Touch the desired tag type. You can select from artists, albums and genres. Select a list type.
iPod/iPhone iPod/iPhone Preparation 1 ÑÑConnectable iPod/iPhone 2 3 4 The following models can be connected to this unit. Made for • iPhone XS Max • iPhone XS • iPhone XR • iPhone X • iPhone 8 Plus • iPhone 8 • iPhone 7 Plus • iPhone 7 • iPhone SE • iPhone 6s Plus • iPhone 6s • iPod touch (6th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.kenwood.com/cs/ce/ipod/.
iPod/iPhone Open the drawer 6 2 5 5 Content list • Touch the right side of the screen to display the Content list. Touch again to close the list. • Displays the playing list. When you touch a track/file name on the list, playback will start. 6 [ Close the drawer 2 5 ]/[ ] •[ ] : Repeats the current track/album. Each time you touch the key, repeat modes are switched in the following sequence: ), All songs repeat ( ), Song repeat ( Repeat off ( ) •[ ] : Randomly plays all tracks in the current album.
iPod/iPhone ÑÑCategory search You can search for a file by selecting a category. 1 2 Touch [Category List]. Touch the desired category. hh The list corresponding to your selection appears. 3 Touch to select the desired item in the list. Repeat this step until you find the desired file. ÑÑLink search You can search for a file of the same artist/ album/genre/composer as that in the current track. 1 2 Touch [Link Search]. Touch the desired tag type.
Radio Radio (DNX577S) Radio Basic Operation 1 Information display • Displays the information on the current station: Frequency Touching [ ] allows you to switch between Content A and Content B. Content A: PS name, Radio Text, Title & Artist Content B: PTY Genre, Radio Text plus Preset#: Preset number • Change the text size of the information smaller when the "Small Audio Text" is set to "ON" in the User Interface screen (P.90). Most functions can be controlled from the source control screen.
Radio • [PTY] (FM only) : Searches for a program by program type. For details, see Search by program type (P.53). • [MONO] (FM only) : Selects the Monaural reception mode. 7 Indicator Items • [ST]: A stereo broadcast is being received. • [MONO]: The forced monaural function is active. • [TI]: Indicates the reception state of traffic information. White: TP is being received. Orange: TP is not being received.
Radio Selecting Operation ÑÑPreset select You can list and select memorized stations. 1 Touch [ ] on the right side of the screen. Select a station from the list. Traffic Information (FM only) You can listen to and watch traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Broadcast Data System that includes TI information. 1 Touch [ ] on the left side of the screen. Touch [TI].
HD Radio™ Tuner HD Radio™ Tuner (DNX997XR / DNX697S) HD Radio Tuner Basic Operation 1 Information display Most functions can be controlled from the source control screen. To listen to the HD Radio source, touch [HD Radio] icon on the source selection screen. (P.17) NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switch the operation mode (P.104). • HD Radio broadcasting is for North American sales area only. • The screen shot below is for tuner.
HD Radio™ Tuner 5 Operation keys • [E] [F] : Tunes in a station. The method of switching frequencies can be changed (see 2 Seek mode). • [CHS] [CHR] : Selects a channel. • [1] : Display the Channel List screen. See Channel search (P.57). • [ ] : Display a list of registered bookmarks. See Bookmark list (P.58). •[ ] : Displays the Graphic Equalizer screen. (P.98) 6 Preset list • Touching [ ]/[ ] allows you to change the display size. • Recalls the memorized station or channel.
HD Radio™ Tuner Receive Mode 2 Touch [ ] on the left side of the screen. Touch [AME]. You can set the radio broadcasts receive mode. 1 Touch [ ] on the left side of the screen. Touch [RCV]. 3 2 Touch [Yes]. Select a receive mode. hh Auto memory starts. ÑÑManual memory You can store the currently being received station or channel in the memory. ■■ [Auto] Switch between digital and analog audio automatically. 1 2 ■■ [Digital] Select this to tune to digital audio only.
HD Radio™ Tuner ÑÑDirect search 2 Select the desired content from the list. You can tune in by entering the desired frequency or channel number. 1 Touch [ ] on the left side of the screen. Touch [10key Direct]. NOTE • Touch [Info Change] in the channel list. Select the sequence of the list (Song title, artist name, album name). 2 Select the search method. ÑÑSearch by program type (FM only) You can tune in the station broadcasting the specified type of program when listening to FM.
HD Radio™ Tuner Bookmark Stores tag information (title, artist, album, URL, and description) about the song you are listening to now. Detailed information and QR codes can be displayed according to the stored tag information. ÑÑBookmark registration 1 Touch [ Touch [ ] on the left side of the screen. ]. ■■ [ Delete] Deletes the bookmarks being displayed. Bookmark delete Deleting a bookmark. 1 hh Registers a bookmark. 2 NOTE Touch [Delete]. Select the bookmark to delete from the list.
HD Radio™ Tuner Alert Message This function is to receive alert messages. First, you need to turn on the “Emergency Alerts”. (P.54) ÑÑWhen an Alert Message comes [Snooze] ÑÑDisplay of the received Alert Message You can read the received alert message afterward. 1 2 The alert message is erased. Same alert message cannot be displayed for next 10 minutes. Touch [ ] on the left side of the screen. Touch [Alert Message Log]. Select the desired Alert Message from the list.
SiriusXM® SiriusXM® SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. To listen to the SiriusXM source, touch the [SiriusXM] icon on the source selection screen. (P.
SiriusXM® • Change the text size of the information smaller when the "Small Audio Text" is set to "ON" in the User Interface screen (P.90). NOTE • While getting contents, "Waiting" is showing on the display. 2 Band key Switches among bands. (SXM1/SXM2/SXM3/ SXM4) 3 Artwork • Displays/hides artwork area. • Displays the album artwork for most SiriusXM music channels 4 Operation keys • [1] : Display the Category search screen. For details on search operation, see Category/ Channel search (P.63).
SiriusXM® Storing Channels in Preset Memory You can store the current channel in memory. 1 2 Direct search You can tune in a channel directly. 1 Tune in the channel you wish to store in the memory. Touch [ ] on the right side of the screen. 2 3 Touch [ ] on the left side of the screen. Touch [Direct Channel]. Enter the channel number and touch [Enter]. Touch [SXM(1-4) P(1-6)] in which you want to store the channel for 2 seconds until a beep sounds.
SiriusXM® Category/Channel search Replay You can specify the desired category and select a channel. You can replay the last 60 minutes of the program from the current channel. 1 Touch [1]. 1 2 Select a category. ■■ [E] [F] Press to skip to the previous/next track. Press and hold to rewind or fast forward. (It will be cancelled automatically after about 50 seconds.) hh Channel list appears. 3 Touch [L] or [Replay] on the function panel. Select the desired content from the list.
SiriusXM® ■■ [Info Change] Touch [Info Change]. Select a desired item: content info, channel name, artist name, song title, category name. To return to live music/content 1 2 Touch the left side of the screen. Touch [Live]. TuneMix™ TuneMix™ plays a unique blend of songs from your Preset music channels of the current SiriusXM Preset Band, allowing you to build a custom channel from as few as two to as many as 6 music channels. You can even skip songs you don’t want to hear.
SiriusXM® Content Alerts NOTE • To cancel TuneScan™, touch the left side of the screen. Touch [TuneScan]. • Touch and hold [TuneScan] to cancel TuneScan, and the music/content which was present on the channel before starting TuneScan will be played. • Compatible with SXV200 or later tuner models. When a broadcast program related to the registered artist, song or team starts, an Alert Content List screen appears to allow you to switch the current channel to the relevant channel.
SiriusXM® SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams. Choose to tune in and hear the play unfold like it was live. Continue listening to the game or return to your previous channel. 1 1 Touch [ ] on the left side of the screen. Touch [SETUP]. When a big play happens during one of the games, an Alert screen appears. ■■ [Listen] Touch to tune in that channel and play back the big play.
SiriusXM® ÑÑParental code ÑÑParental Control You can set a SiriusXM parental code for Parental Control. Parental Control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected channels. 1 Touch [Parental Code] on the SiriusXM SETUP screen. hh Parental Pass Check screen appears. NOTE • The code number is set to “0000” as default. 2 1 2 Touch [Parental Control] on the SiriusXM SETUP screen. Touch [User], [Mature] or [OFF].
SiriusXM® NOTE 3 • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. 4 Touch each channel in the list and set to ON or OFF. Touch each channel on the list and set to ON or OFF. [ON]: Locks the channel. [OFF]: Unlocks the channel. NOTE • To delete the skip channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. • Touch [Info Change].
SiriusXM® 3 Touch each content list item you want to check or uncheck. NOTE • You can select (þ) up to 60 artists or songs. To select a Team Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ 1 Touch [My Games]. 2 Touch the desired league in the list. ●● To delete the Artist and Song 1 2 Touch [Delete]. Touch the content(s) in the list you want to select. ■■ [þ All] Selects all contents. ■■ [¨ All] Clears all check marks.
SiriusXM® ÑÑSportsFlash™ setup 5 Touch [ ] twice. Activating SportsFlash 1 Touch [SportsFlash] on the SiriusXM SETUP screen. hh SportsFlash is turned on or off. Default is “ON”. Selecting SportsFlash Beep 1 Touch [SportsFlash Beep] on the SiriusXM SETUP screen. hh SportsFlash Beep is turned on or off. Default is “ON”. ■■ [Edit] Sets and removes teams. ■■ [Priority] Sets the priority of a team. Selecting the teams for SportsFlash 1 2 Touch [SportsFlash Team Set] on the SiriusXM SETUP screen.
SiriusXM® 3 Touch [Done]. ÑÑTuneStart™ 1 Touch [Tune Start] on the SiriusXM SETUP screen. The TuneStart is turned on or off. Default is “ON”. ÑÑReset NOTE 1 • Priority can be set on up to 5 teams. • When priority has already been set for 5 teams, it cannot be set for any other team. Delete an unnecessary team. 2 Touch [SiriusXM Reset] on the SiriusXM SETUP screen. hh Confirmation screen appears. Touch [YES]. hh All SiriusXM settings are reset to defaults.
Bluetooth Control Bluetooth Control Using the Bluetooth function allows you to use various functions such as listening to the audio file and making/receiving a call. Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as cell-phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communication with each other.
Bluetooth Control Register the Bluetooth device 5 Touch [ ] on the Select Device screen. It is necessary to register the Bluetooth audio player or cell-phone in this unit before using the Bluetooth function. You can register up to 10 Bluetooth devices. NOTE • Up to 10 Bluetooth devices can be registered. If an attempt is made to register the 11th Bluetooth device, the Bluetooth device connected on the earliest date will be deleted to register the 11th one.
Bluetooth Control 8 Select the function you want to use. 2 3 ■■ PBAP [Phonebook DL] Select if you want to transfer your phonebook data. Touch [Bluetooth]. hh Bluetooth Setup screen appears. See the following section for each setting. • Connect the Bluetooth device (P.74) • Change the PIN Code (P.75) • Change the device name (P.75) ■■ HFP [Hands Free1]/[Hands Free2]/[No Connection.] Select the hands-free number to connect.
Bluetooth Control ■■ [TEL (HFP) 1], [TEL (HFP) 2] Select when the device is connected with the unit as hands-free phone 1 or 2. 4 NOTE • If the device compatible with wireless Apple CarPlay is deleted, the same device is deleted from the Apple CarPlay device list screen. ■■ [Audio (A2DP)/App (SPP)] Select to interwork with an application installed in a smartphone or to use as an audio player. ÑÑChange the device name Touch [Close].
Bluetooth Control Playing the Bluetooth Audio Device Most function can be controlled from the source control screen. To select Bluetooth source, touch [Bluetooth] icon on the source selection screen. (P.17) NOTE Control screen 5 6 2 3 1 Artwork/VU meter • Displays/hides artwork area. • Touch to switch between the artwork and VU meter.
Bluetooth Control ÑÑKENWOOD Music Mix Up to 5 Bluetooth audio device can be connected and switched easily to play music. 1 2 Touch [ ]. hh A list of registered devices is displayed. Touch [ ] of device name you want to connect. • Touching [ ] displays the Bluetooth device connection setup screen. (P.74) ] on the left of the • Touching [ connected device ([ ]) disconnects this device. • • 3 NOTE • If a connected Bluetooth audio device is operated to play music, connections are switched.
Bluetooth Control Using the Hands-Free Unit 4 Select a dialing method. You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • If you use the hands-free function frequently, move the TEL short-cut key (icon) to the Home screen. (P.18) • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used. Only the Apple CarPlay or Android Auto Hands-Free function can be used.
Bluetooth Control Call using call records 1 2 Touch [ 5 Select the phone number from the list. ]. Select the phone number from the list. NOTE • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.82). Call using the phonebook 1 2 3 Touch [ Touch [ Call using the preset number ]. ]. Select the initial. • Characters with no corresponding name will not appear.
Bluetooth Control ÑÑVoice Recognition You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) 1 Press the [ ] button for 1 second. NOTE • When shifting the gear to the reverse (R) position and monitoring the picture from the rear view camera, this screen does not appear even if a call comes in. To end call 1 DNX997XR Press for 1 second While talking, touch [ ].
Bluetooth Control DNX697S / DNX577S ÑÑPhone number preset You can register frequently used phone numbers in this unit. 1 2 Touch [ ]. Touch [Edit]. ●● Mute your voice Touch [ ] to mute or not to mute your voice. ●● Output the dial tone Touch [DTMF] to display the tone input screen. You can send tones by touching desired keys on the screen. 3 Select where to preset.
Bluetooth Control ■■ [Delete] To delete a preset number, touch [Delete] and then touch [OK] on the confirmation screen. Hands-Free Setup You can make various settings for the HandsFree function. ÑÑPhonebook transfer 1 You can transfer phonebook data from your Bluetooth smartphone using PBAP. 2 1 2 Touch [ ]. Touch [ ]. Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP Menu screen appears. 3 Touch [Bluetooth]. hh Phonebook data transfer starts.
Bluetooth Control ■■ [Auto Response]* Set the automatic response time to pick-up an incoming call. [OFF ](Default): Turns off the Automatic response function. [1]/[5]/[10]/[15]/[20]/[25]/[30]: Sets the ringing time (second). ■■ [Auto Pairing] When set to “ON”, the Apple Auto Pairing function is turned on to automatically register the iPod touch or iPhone connected to this unit. [ON ](Default): Turns on the Apple Auto Pairing function. [OFF]: Turns off the Apple Auto Pairing function.
Other External Components Other External Components View Camera 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline *2 NOTE • To connect a camera, see Connecting the camera (P.117). • To use a rear view camera, a REVERSE lead connection is required. (P.112) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position.
Other External Components setting when an HD camera is connected. (DNX997XR only) ■■ [Rear Camera Settings *]2 Adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set. For details, see the instruction manual of your camera. ■ [3rd VIEW CAMERA] Set the camera assignment from view camera connected to 3rd view camera input terminal. ■■ [Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is “ON”.
Other External Components 7 [None] *2 4 Assign no position to the view camera connected to the selected input terminal. Adjusting the position of the selected mark. *1 The [REAR VIEW CAMERA] and [FRONT VIEW CAMERA / DASH CAM] setting screens only. *2 Except the [REAR VIEW CAMERA] setting screen. 4 A B Touch [Enter]. NOTE • The screen shot above is for the [FRONT VIEW CAMERA / DASH CAM] setting screen. It may be different from the ones for [REAR VIEW CAMERA], [3rd VIEW CAMERA] and [AV-IN].
Other External Components 2 ÑÑAdded function Touch [Camera]. Display the map while playing the recorded file 1 1 2 3 Play the recorded file. See the instruction manual of the Dashboard Camera. Touch [ ]. 2 1 Camera Switching Keys Touch to switch the view camera. It is necessary to set “Camera Assignment Settings” beforehand except “Rear”. See To set up the camera assignment settings (P.85). 2 Camera off Touch to exit the camera screen.
Other External Components OEM Features Operation By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and can display vehicle information on this unit. 1 2 3 Press the [HOME]/[ ] button. hh HOME screen appears. Touch [ ] on the HOME screen. Touch icon. • Displays the control screen of the Bluetooth Hands Free function provided for the vehicle.
Setup Setup Monitor Screen Setup You can adjust the image quality of video, menu screen, etc. 1 2 Press the [MENU]/[ ] button. hh Popup menu appears. System Setup 1 2 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. Touch [Screen Adjustment]. hh Screen Adjustment screen appears. 3 Adjust each setting as follows. ■■ [Backlight]/[Contrast]/[Black]/ [Brightness]/[Color]/[Tint] Adjust each setting. ■■ [Aspect] Select a screen mode.
Setup User Interface Setup You can setup user interface parameters. 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP screen appears. Touch [User Interface]. hh User Interface screen appears. 4 Set each parameter as follows. ■■ [Language Select] Select a language. ■■ [Touch Panel Adjust] (Except DNX997XR) Adjust the sensing position of the touch panel. (P.91) ■■ [Time Format] Select the time display format.
Setup ÑÑTouch panel adjustment 1 2 Special Setup Touch [Touch Panel Adjust] on the User Interface screen. hh Touch Panel Adjust screen appears. You can setup special parameters. Follow the instruction on the screen and ]. long touch the center of each [ 2 2 1 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP screen appears. Touch [Special]. hh Special screen appears. 1 4 ■■ [DEMO] Select the demonstration mode. Default is “ON”.
Setup ■■ [Screen transition effect] Select whether to use the screen transition effect when the source control screen is switched to the Home screen. "ON" (Default)/"OFF" NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. Display Setup 1 2 3 ÑÑCustomizing the key color You can set the key illumination color. Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP screen appears.
Setup ÑÑChange the wallpaper image or color 1 2 Touch [Wallpaper Customize] on the Display screen. Select an image. *1 *2 Touch [User1 Select] or [User2 Select] on the Wallpaper Customize screen. 2 Select the image to load. 3 Touch [Enter]. *3 To select wallpaper color 2 You can load an image from the connected USB device and set it as the wallpaper image. Before starting this procedure, it is necessary to connect the device which has the image to load.
Setup AV Setup • If you select Wireless Mirroring, Apple CarPlay or Android Auto as the main source, you cannot select DISC (Music CD/ Disc media), USB, SD or iPod as the AV output source. You can set AV parameters. 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. ■■ [Driving Position] Select the driving position (left or right). “Left” (Default)/“Right” Touch [SETUP]. hh SETUP screen appears.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 2 4 Press the button 1 followed by the button 2 for 1 second at the same time. DNX997XR Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. 2 1 DNX697S 2 1 hh Speaker system select screen appears. 5 • • • • • • • • See the following section for each setting. Set up Speaker / X’over (P.96) Controlling EQ / SW Level (P.98) Set Position / DTA (P.
Controlling Audio Speaker / X’over setup 1 2 3 ■■ [Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large Press the [MENU]/[ ] button. hh Popup menu appears. ■■ [Xʼover] Display the speaker crossover setup screen. You can adjust the crossover frequency that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.96) Touch [Audio]. hh Audio screen appears. Touch [Speaker / Xʼover].
Controlling Audio 3 Set each parameter as follows. ■■ [HPF FREQ] High Pass Filter adjustment. (When Front or Rear is selected on the Speaker Select screen) ■■ [LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on the Speaker Select screen) ■■ [Slope]*1 Set a crossover slope. ■■ [Gain] Adjust the gain of the front speaker, rear speaker, or subwoofer. ■■ [TW Gain] *2 Adjust the tweeter level.
Controlling Audio Controlling General Audio 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. hh Audio screen appears. Touch [Fader / Balance]. Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 2 3 4 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. hh Audio screen appears. Touch [EQ / SW Level]. Set each parameter as follows. 4 ■■ [Fader], [Balance] Adjust the volume balance around the touched area.
Controlling Audio ■■ [SW Level] Adjust the subwoofer volume. This setting is not available when Subwoofer is set to “None”. See Speaker / X’over setup (P.96). ÑÑRecall the EQ curve 1 2 Volume Offset Finely adjust the volume of the current source to minimize the difference in volume between different sources. 1 Touch [Preset Select]. Select an EQ curve. 2 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. hh Audio screen appears. 3 Touch [Volume Offset].
Controlling Audio Zone Control ■■ [Zone Select] Touch [Single Zone] to turn off the dual zone function. You can select different sources for front and rear positions in the vehicle. 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. ■■ [Front Source], [Rear Source] Select an audio source for each. Rear Source; “AV-IN”/“DISC”/“iPod”/“SD”/“USB”/“OFF” Touch [Audio]. hh Audio screen appears. ■■ [Rear VOL.] Adjust the rear source volume. Touch [Zone Control]. hh Zone Control screen appears.
Controlling Audio 3 4 Touch [Sound Effect]. Set each parameter as follows. Listening Position / DTA Listening Position / DTA allows you to improve the sound field depending on the position of the seat you sit. Listening Position / DTA allows you to set “Listening Position” and “Front Focus”. You cannot set both at the same time. 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. hh Audio screen appears. Touch [Position / DTA].
Controlling Audio 3 Touch [T] or [U] to adjust the delay time of the selected speaker. NOTE • When the 3-way speaker system is selected, front focus feature is disabled. ÑÑFront Focus fine adjustment 1 2 3 4 5 Touch [Adjust]. Touch [Delay]. Set each parameter as follows. Touch [Level]. Touch [T] or [U] to adjust the sound level of the selected speaker. ■■ [Sound Image LR (Front)] Focus the sound image on the front of front seats.
Controlling Audio NOTE • To initialize the Delay and Level settings, touch [Initialize] and [YES] on the confirmation screen. Audio Setup memory Audio Control settings can be memorized. The memorized settings can be recalled at any time. 1 2 3 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. hh Audio screen appears. Touch [Audio Memory]. ■■ [SETUP Memory] Lock or unlock the Audio SETUP Memory/ Recall/Clear. ■■ [Audio SETUP Memory] Memorize the current audio settings.
Remote control Remote control This unit can be operated using the remote control KNA-RCDV331 (optional accessory). # CAUTION • Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
Remote control ■■ DVD Title number/Chapter number ÑÑBasic Operation ■■ VCD 1.X and 2.X (PBC OFF) Track number ■■ VCD 2.X (PBC ON) Scene number/Track number 3 5 6 7 ■■ Radio (DNX577S) Frequency value 9 ■■ HD Radio tuner (DNX997XR / DNX697S) Frequency value/Channel number 3 2 4 ■■ Music CD Track number 2 1 11 17 8 10 12 ■■ SiriusXM Channel number 13 Enter the number of the content you want to play using the numeric keypad. 14 For DVD, VCD or music CD, press the [ENTER] button.
Remote control Key Name Mode switch 11 MAP DIR AUD, DVD NAV 12 R/S AUD, DVD 13 C/D AUD, DVD 14 Numeric Keypad AUD DVD 106 Function Switches the display angle each time it is pressed. (DNX997XR only) Switches between the heading up navigation and north up navigation map displays. Selects the folder to be played. For the Radio (DNX577S only) and HD Radio (DNX997XR / DNX697S only) sources in AUD mode, selects FM/AM band to be received.
Connection/Installation Connection/Installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.
Connection/Installation In case of DNX997XR 6 (M5 x 8 mm) x6 7 (M5 x 8 mm) Cooling fan • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. x6 8 x1 9 (3.
Connection/Installation Installing the unit DNX697S / DNX577S 8 ÑÑNon-Japanese cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ÑÑJapanese cars 6 or 7 Car Bracket 6 or 7 NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). A A : Wide B B : Narrow ÑÑGPS antenna GPS antenna is installed inside of the car.
Connection/Installation ÑÑMicrophone unit ÑÑRemoving the trim plate 1) Check the installation position of the microphone (accessory 4). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 4), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 4) to the driver.
Connection/Installation ÑÑRemoving the unit 1) Remove the trim plate. (P.110) 2) Insert the two extraction key (accessory 5) deeply into the slots on each side, as shown. 5 3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside. NOTE • Be careful to avoid injury from the catch pins on the extraction key. 4) Pull the unit all the way out with your hands, being careful not to drop it.
Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Green/Black Purple To rear right speaker Purple/Black If no connections are made, do not let the cable come out from the tab.
Connection/Installation ÑÑ3-way speaker system setup ÑÑConnecting the system and external components ●● DNX997XR / DNX697S 13 12 11 10 9 8 7 6 5 Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) Power amplifier (optional accessory) Speaker 1 2 3 4 1 AV Audio output (ø3.
Connection/Installation 7 Dashboard camera interface Connect a Dashboard Camera DRV-N520 (optional accessory). (P.117) 8 Accessory 9: GPS Antenna Use the supplied GPS antenna. Using the GPS antenna other than the supplied one may cause a drop in positioning accuracy.
Connection/Installation ÑÑSecuring the USB extension ●● DNX577S cable iPod/iPhone[2] KCA-iP103 (0.8m) [3] Secure the USB extension cable with insulating tape or the like so that its connectors are not disconnected. Accessory 2 (Black) (1 m) [4] USB (Black) terminal[1] ÑÑConnecting an iPod/iPhone ●● DNX997XR / DNX697S iPod/iPhone[2] KCA-iP103 (0.8m) [3] Accessory 3 (Gray) (1 m) [4] Accessory 2 (Black) (1 m) [4] iPhone (with Apple CarPlay)[2] KCA-iP103 (0.
Connection/Installation ÑÑConnecting an Android smartphone ●● DNX997XR / DNX697S Android smartphone[2] Micro USB to USB cable [2] Accessory 3 (Gray) (1 m) [3] Accessory 2 (Black) (1 m) [3] USB (Gray) terminal[1] [4] USB (Black) terminal[1] ●● DNX577S Android smartphone[2] Micro USB to USB cable[2] Accessory 2 (Black) (1 m) [3] USB (Black) terminal[1] SB maximum power supply current : U DC 5 V = 1.5 A [2] Sold separately [3] See Securing the USB extension cable (P.115).
Connection/Installation ÑÑConnecting the camera Left side view camera and Right side view camera [2] [4] Front view camera [5] [7] MOS-3xx series (optional accessory) or C commercially available camera. [6] For HD video, an HD camera is also used as Rear view camera. (DNX997XR only) [7] For HD video, an HD camera is also used as Front view camera.
Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. ÑÑAbout settings • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter.
Troubleshooting ÑÑOthers The Touch Sensor Tone doesn’t sound. The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack. Android smartphone operation is slow. This occurs when multiple applications are started on the Android smartphone. For details, see Caution for Smartphone Users (P.7). Error Messages When you fail to operate the unit correctly, the cause of the failure appears as the message on the screen. There is an error in the speaker wiring.
Troubleshooting ÑÑSiriusXM ÑÑApple CarPlay Check Tuner A SiriusXM tuner is not connected to this unit. Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio. The GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. ÑÑList of playable discs Disc types / Standard Support DVD Video DVD Audio DVD-VR DVD-R*1 v × × v DVD-RW DVD+R DVD+RW DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM CD Music CD*1 CD-ROM CD-R CD-RW DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA HDCD CCCD Others Dualdisc Super audio CD v : Playback is possible. r : Playback is partly possible. × : Playback is impossible.
Appendix ÑÑAbout files The following audio and video files are supported. ■■Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC HE-AAC(V1,V2) MP3 (.mp3) MPEG-1/MPEG-2 Audio Layer 3 WMA (.wma) Windows Media Audio Standard L3 profile (Version 7,8,9) Linear PCM RIFF waveform Audio (WAVE) (.wav) Format FLAC (.flac) flac 8 – 320kbps, VBR 16 – 48 kHz 16 bit 8 – 320kbps, VBR 16 – 48 kHz 16 bit 8 – 320kbps 16 – 48 kHz 16 bit 16 bit/24 bit Vorbis (.
Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 ■■DVD disc marks ALL Indicates a region number. The discs with this mark can be played with any DVD player. 8 Indicates the number of audio languages recorded. Up to 8 languages can be recorded in a movie. You can select a favorite language.
Appendix DVD Language Codes Code aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha he hi hr hu hy 124 Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani G
Appendix Specifications ■■Monitor section Picture Size DNX997XR : 6.75 inches (diagonal) wide : 152.1 mm (W) × 79.5 mm (H) 5-63/64 × 3-1/8 inch DNX697S / DNX577S : 6.75 inches (diagonal) wide : 151.8 mm (W) × 79.68 mm (H) 5-31/32 × 3-1/8 inch Display System DNX997XR: AAS LCD panel Except DNX997XR: TN LCD panel Drive System : TFT active matrix system Number of Pixels DNX997XR: 2,764,800 (1280H x 720V x RGB) Except DNX997XR: 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.
Appendix ■■Wireless Mirroring Section (DNX997XR) Mode : Sink Copyright protection : HDCP2.2 Touch Control : UIBC ■■Wi-Fi section (DNX997XR) IEEE Standard : 802.11 a/b/g/n/ac Frequency Range : Dual Band ( 2.4GHz/5GHz ) Channels : Auto(1-11ch)/Auto(149,153,157,161ch) Transfer rates (MAX) : 11a: 54 Mbps / 11b: 11 Mbps / 11g: 54 Mbps / 11n: 300 Mbps / 11ac: 867 Mbps Output Power 2.
Appendix ■■Digital FM tuner section (DNX997XR / DNX697S) Frequency Range (step) : 87.9 MHz – 107.9 MHz (200 kHz) Frequency Response (± 3.
Appendix ■■Navigation section ■■General Receiver DNX997XR : High-sensitivity GNSS receiver DNX697S / DNX577S : High-sensitivity GPS receiver Operating Voltage : 12V DC car battery Reception Frequency GLONASS: 1598.0625 MHz – 1605.375 MHz (C/A code) (DNX997XR) GPS: 1575.
Appendix About this Unit ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • LDAC and LDAC logo are trademarks of Sony Corporation. • Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society. • • • • • • • Manufactured under license from Dolby Laboratories.
Appendix INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTPS://WWW.MPEGLA.COM.
Appendix ■■FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix 132 ■■Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) ■■Informação sobre a eliminação de pilhas Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
DNX997XR DNX697S DNX577S GPS NAVIGATION SYSTEM INSTRUCTION MANUAL © 2020 JVCKENWOOD Corporation IM402_Nav_K_En_00
© 2020 JVCKENWOOD Corporation All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
No Warranty. The Navigation Provider Products are provided to you "as is," and you agree to use them at your own risk.
Data, as further set forth at https://legal.here.com/en-gb/terms /general-content-supplier-terms-and-notices. Term. This Agreement is effective until such time as (i) if applicable, your subscription term is either terminated (by you or by the Navigation Provider) or expires, or (ii) Navigation Provider terminates this Agreement for any reason, including, but not limited to, if the Navigation Provider finds that you have violated any of the terms of this Agreement.
Table of Contents Getting Started................................ 1 Navigation System ................................... 1 Status Bar Icons ...................................... 1 Using the On-Screen Buttons .................. 1 Removing a Shortcut ............................... 1 Adding a Shortcut .................................... 1 Using Multi-touch Controls ...................... 1 Updating the Software ............................. 1 Updating Map Data ..................................
Editing a Saved Trip ......................... 10 Saving Trip Logs ............................... 10 Viewing Previous Routes and Destinations ........................................... 10 Viewing the Weather Forecast .............. 10 Viewing Weather Near a Different City .................................................... 11 Viewing Road Weather .......................... 11 Finding Fuel Stations and Prices ........... 11 Dynamic Parking ................................... 11 About Traffic.............
Getting Started WARNING See the Safety Precautions and Important Information in the KENWOOD system instruction manual for product warnings and other important information. NOTE: The screenshots shown in this manual may not exactly match the screens on your navigation system. The images used in this manual are intended for reference only. Navigation System For complete audio system information, see the KENWOOD system instruction manual. Removing a Shortcut 1 Select Where To? > > Remove Shortcut(s).
Finding Locations About Locations The detailed maps loaded in your device contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category 1 Select Where To?. 2 Select a category, or select Categories. 3 If necessary, select a subcategory. 4 Select a location. Searching Within a Category To narrow your search results, you can search within some categories. 1 Select Where To?.
Finding an Intersection You can search for an intersection or junction between two streets, highways, or other roads. 1 Select Where To? > Categories > Intersections. 2 Follow the on-screen instructions to enter street information. Select the intersection. 3 Finding a City 1 Select Where To? > Categories > Cities. 2 Select an option: • Select a city from the list of nearby cities. • To search near another location, select Searching near: (Changing the Search Area).
Clearing the List of Recently Found Places Select Where To? > Recent > Clear > Yes. > Finding Parking 1 Select Where To? > Categories > Parking. 2 Select a parking location. Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location. 1 Select Settings > Navigation > GPS Simulator. 2 From the main menu, select View Map. 3 Tap the map twice to select an area. The address of the location appears at the bottom of the screen.
4 Select a route. 5 Select Go!. Your Route on the Map NOTICE The speed limit feature is for information only and does not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVCKENWOOD will not be responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs. The route is marked with a magenta line. A checkered flag marks your destination.
4 Select the ending point of the road Lodging section, and select Next. Select Done. 5 Restrooms Finding Exit Services 1 From the map, select > Exit Services. 2 Use the arrows to select an upcoming exit. 3 Select an exit service tab. 4 Select a point of interest. Navigating to an Exit 1 From the map, select > . 2 Select Go!. > Exit Services Avoiding Road Features 1 Select Settings > Navigation > Avoidances. 2 Select the road features to avoid on your routes, and select Save.
Installing POI Loader Application You can create or download custom POI lists on your computer and prepare them for installation using the POI Loader application. You must use a USB mass storage device to load POIs. 1 Go to www.garmin.com/poiloader. 2 Click POI Loader. 3 Download and install the POI Loader application onto your computer. Installing Custom Points of Interest Before you can install custom points of interest, you must prepare POI lists for installation using the POI Loader application.
2 Select an option: • Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top. • Select North Up to display the map in 2-D with north at the top. • Select 3-D to display the map in three dimensions. 3 Select Save. Viewing Route Activity Viewing a List of Turns While navigating a route, you can view all of the turns and maneuvers for your entire route and the distance between turns. 1 While navigating a route, select the text bar on the top of the map.
Using the Apps Searching Help Topics Select Apps > Help > . About ecoRoute The ecoRoute™ feature calculates the fuel economy and the fuel price of navigating to a destination, and offers tools for improving fuel efficiency. The data provided by the ecoRoute feature is an estimate only. To receive more-accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy (Calibrating the Fuel Economy).
3 Select Export to export and save a report to the USB mass storage device. Resetting ecoRoute Information 1 Select Apps > ecoRoute™ > Vehicle Profile. 2 Select Reset. 3 Select Yes. Planning a Trip You can use the trip planner to create and save a trip with multiple destinations. 1 Select Apps > Trip Planner. 2 Select New Trip. 3 Select Select Start Location. 4 Search for a location (Finding a Location by Category). 5 Select Select. 6 To add additional locations, select . 7 Search for a location.
The detailed forecast for that day appears. About Traffic Viewing Weather Near a Different City 1 Select Apps > Weather > Current NOTICE Garmin and JVCKENWOOD are not responsible for the accuracy or timeliness of traffic information. Location. 2 Select an option: • To view weather for a favorite city, select a city in the list. • To add a favorite city, select Add City, and enter a city name.
A list of traffic events appears, organized by their location on the route. Select an event. 3 Manually Avoiding Traffic on Your Route 1 From the map, select . 2 Select Traffic On Route. 3 If necessary, use the arrows to view other traffic delays on your route. 4 Select > Avoid. Taking an Alternate Route 1 While navigating an automobile route, select . 2 Select Alternate Route. 3 Select a route. Viewing Traffic on the Map The traffic map shows color-coded traffic flow and delays on nearby roads.
Custom Avoidances: Allows you to avoid specific roads or areas. Advanced Detours: Sets the length of a detour. Safe Mode: Disables all functions that require significant operator attention and could become a distraction while driving. Voice Prompts: Enables voice prompts. GPS Simulator: Stops the device from receiving GNSS signals. Changing the Route Calculation Mode 1 Select Settings > Navigation > Calculation Mode.
Travel History: Allows the device to record information for the myTrends (Using Suggested Routes), Where I’ve Been (Viewing Previous Routes and Destinations), and Trip Log (Viewing the Trip Log) features. Clear Travel History: Clears your travel history from the navigation system. Update Maps: Exports data from the navigation unit for updates (Updating Map Data). Proximity Alerts Settings NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display.
Index Symbols 2-D map view 7 3-D map view 7 A addresses, finding 2 alerts 5 traffic 8 audio, proximity points 14 avoidances area 6 customizing 6 deleting 6 disabling 6 road 6 road features 6 fuel, prices 9, 11 fuel economy. 9 See also ecoRoute fuel price, changing 9 G geocaching 3 going home 3 H help 9 home editing location 3 going 3 setting locations 3 I O on-screen buttons 1 P parking 4, 11 phone 2 phone calls 2 POI.
searching for delays 12 trafficTrends 13 trafficTrends 13 disabling 13 travel history 13 trip information 10 resetting 8 viewing 8 trip log, viewing 7 trip planner 10 turn list 8 U unit ID 13 V vehicle profile 9 W weather 10, 11 Where Am I? 4, 8 16 Index
To download free navigation software updates and purchase updated maps for your product, go to www.garmin.com/kenwood.
DNX997XR DNX697S DNX577S GPS NAVIGATION SYSTEM Quick Start Guide SYSTÈME DE NAVIGATION GPS Guide de démarrage rapide SISTEMA DE NAVEGACIÓN GPS Guía de inicio rápido • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . • The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference.
Important Notice on Software ÑÑSoftware License on This Product The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties.
Article 3 (Terms of License) 1. I n assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement. 2.
Before Use Contents Contents................................................. 4 Before Use.............................................. 4 About the Quick start guide.................................. 4 How to read this manual......................................... 4 Precautions.................................................................. 4 Safety Precautions and Important Information..............................
Before Use • You can select a language to display menus, audio file tags, etc. See User Interface Setup (P.88) in the Instruction Manual. • The Radio Data System or Radio Broadcast Data System feature won’t work in areas where the service is not supported by any broadcasting station. ÑÑProtecting the monitor • To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with a sharp tip.
Before Use Safety Precautions and Important Information Read this information carefully before starting to operate the KENWOOD Car Navigation System and follow the instructions in this manual. Neither KENWOOD nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual. # WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel DNX997XR 8 9 1 2 DNX697S / DNX577S 10 3 4 5 6 7 8 1 4 2 NOTE 3 5 6 • The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual panels. Number Name Motion 1 Remote Sensor • Receives the remote control signal. 2 S, R (Volume) • Adjusts the volume. The volume will go up to 15 when you keep pressing R.
Basic Operations Number 5 Name MENU/[ ] Motion • Displays the popup menu screen. • Pressing for 1 second switches attenuation of the volume on/off. • Displays the APP (Apple CarPlay/Android Auto/Wireless Mirroring) screen. • Pressing and holding displays the Voice Recognition screen. • When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, pressing and holding displays Bluetooth pairing waiting dialog. 6 7 G • Displays the Angle Adjust screen.
Basic Operations Initial Settings (DNX697S / DNX577S only) 5 Touch [Viewing Angle]. 6 Select a viewing angle. 7 Touch [ ]. Initial SETUP Perform this setup when you use this unit first time. 1 Viewing Angle You can adjust the viewing angle when the image on the screen is difficult to see evenly. The smaller the (negative) value, the more whitish the image on the screen looks. "0" (Default)/"-1"/"-2"/"-3" Set each item as follows. For details, see Display Setup (P.90) in the Instruction Manual.
Basic Operations Calendar/clock settings 1 Press the [MENU]/[ ] button. hh Popup menu appears. 2 Touch [SETUP]. hh SETUP Menu screen appears. 3 Touch [User Interface]. hh User Interface screen appears. 4 Set each item as follows. Scroll the page to show hidden items. ■■ [Time Format] Select the time display format. [12-Hour] (Default)/[24-Hour] ■■ [Clock] [NAV-SYNC ](Default): Synchronizes the clock time with navigation GPS data. [Manual]: Set the clock manually.
Basic Operations HOME screen descriptions Most functions can be performed from the HOME screen. 1 Widget 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 You can change the widget by flicking left or right on the widget area. 2 3 1 • Widget –– You can change the widget by flicking left or right on the widget area. –– Touch the widget to display the detailed screen. 2 • Displays the source selection screen. (P.12) 3 • Short-cut playback source icons (P.
Basic Operations Popup menu 1 2 1 Press the [MENU]/[ ] button. hh Popup menu appears. Touch to display the popup menu. DNX997XR • Short-cut source icons: The source changes to the one you have set with a short-cut. For the short-cut setting, refer to Customize Short-cut source icons on HOME screen (P.13). Source selection screen description You can display icons of all playback sources and options on the source selection screen.
Basic Operations • Switches to the Android Auto screen from the connected Android smartphone. • Displays the Hands Free screen. (P.24) When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, displays Bluetooth pairing waiting dialog.*1 • Switches to the Radio broadcast. (P.22) DNX577S only Put the unit in standby 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 Touch [ 3 Touch [STANDBY]. ]. • Switches to the HD Radio broadcast. (P.
Basic Operations Source control screen descriptions There are some functions which can be performed from most screens. Indicators 3 List screen There are some common function keys in the list screens of most sources. Display the list screen 1 Touch [1]. hh The list screen appears. 4 1 2 Navigation information 1 1 Short-cut source icons 1 All sources icon 2 Secondary screen • [ ]/[ ] : The Secondary screen changes to another one every time you touch it.
Basic Operations Navigation Operation NOTE • You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help]. For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the [NAV]/[ ] button. DNX997XR • For more information about your navigation system, download the latest version of the Owner’s Manual from http://manual. kenwood.
Basic Operations 4 Touch [ 1 2 ■■Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. 1 From the map, touch [ ]. 2 Touch [Traffic Conditions]. 4 3 6 7 5 8 9 ■■About traffic 1 Views the Next Turn page or the junction view page, when available. 2 Views the Turn List page. 3 Views the Where Am I? page. 4 Stops the currents route. 5 Displays traffic information on the route. 6 Returns to the Main menu. 7 Data field.
Disc Disc Playing a disc ÑÑInsert a disc DNX997XR 1 Press the [G] button. DNX697S / DNX577S 1 2 Press the [ ] button. hh Popup menu appears. Touch [ ]. When removing a disc, pull it horizontally. NOTE 2 3 Touch [DISC EJECT]. hh The panel opens. Insert the disc into the slot. • This is not displayed on the popup menu screen of Apple CarPlay or Android Auto source. Change Apple CarPlay or Android Auto source to other one to display the popup menu screen.
Disc Video screen 5 3 3 4 1 Function panel Touch the left side of the screen to display the function panel. Touch again to close the panel. • I]: Stops playback. Touching twice will play the disc from the beginning when you play it next time. • [ ] [ ]: Fast-forwards or fast-backward the disc. Each time you touch the key, the speed changes. 2 times, 10 times. • [ ] [ ] (DVD only): Plays in slow motion forward or backward. • [SETUP] (DVD only): Touch to display the DVD SETUP screen.
USB/SD/iPod USB/SD/iPod Connecting a USB device 1 Connect the USB device with the USB cable. (P.34) DNX697S / DNX577S 1 Insert the microSD card into the slot until it clicks. ÑÑRemove the SD card ÑÑDisconnect the USB device 1 Press the [HOME]/[ ] button. 2 Touch a source other than [USB]. 3 Detach the USB device. DNX997XR 1 2 3 ÑÑUsable USB device You can use a mass-storage-class USB device with this unit. The word “USB device” appearing in this manual indicates a flash memory device.
USB/SD/iPod Connect iPod/iPhone Preparation • With an Apple CarPlay-capable iPhone, turn off Apple CarPlay by operating the iPhone at functional setup before connecting iPhone. For details of the setup method, contact the manufacturer of the terminal. • Only one iPod/iPhone can be connected. USB/SD/iPod Basic Operation 1 2 3 Press the [HOME]/[ ] button. Touch [ ]. Touch [USB], [SD], or [iPod]. (P.
HD Radio™ Tuner/Radio HD Radio™ Tuner/Radio HD Radio Tuner Basic Operation (DNX997XR / DNX697S) • [CHS] [CHR] : Selects a channel. • [1] : Display the Channel List screen. • [ ] : Display a list of registered bookmarks. •[ ] : Displays the Graphic Equalizer screen. (P.26) To listen to the HD Radio source, touch [HD Radio] icon on the source selection screen. (P.12) 4 Preset list NOTE • HD Radio broadcasting is for North American sales area only. • The screen shot below is for tuner.
HD Radio™ Tuner/Radio Radio Basic Operation (DNX577S) 5 Band keys Switches bands (between FM and AM). 6 Function panel To listen to the Radio source, touch [Radio] icon on the source selection screen. (P.12) Control screen 2 1 6 5 4 3 1 Information display • Displays the information on the current station: Frequency Touching [ ] allows you to switch between Content A and Content B.
Bluetooth Control Bluetooth Control ●● Input the PIN Code in your smartphone/cell-phone. PIN Code is set to “0000” as the default. Register the Bluetooth device It is necessary to register the Bluetooth audio player or cell-phone in this unit before using the Bluetooth function. 1 2 3 4 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [SETUP]. hh SETUP Menu screen appears. 8 Select the function you want to use. Touch [Bluetooth]. hh Bluetooth Setup screen appears.
Bluetooth Control Using the Hands-Free Unit • • • • You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • If you use the hands-free function frequently, move the TEL short-cut key (icon) to the Home screen. (P.13) • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used. Only the Apple CarPlay or Android Auto Hands-Free function can be used.
Bluetooth Control 5 Select the phone number from the list. ÑÑOperations during a call NOTE ●● Adjust the volume of your voice 1) Touch [Speech Quality]. 2) Touch [T] or [U] for [Microphone Level]. • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.80) in the Instruction Manual. ●● Adjust the receiver volume Press the [S] or [R] button. Call using the preset number 1 2 Touch [ ]. Touch the name or phone number.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 2 Press the [MENU]/[ ] button. hh Popup menu appears. Touch [Audio]. ÑÑControlling General Audio 1 Touch [Fader / Balance]. 2 Set each parameter as follows. ÑÑEqualizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 2 Touch [EQ / SW Level]. Touch the screen and set the Graphic Equalizer as desired.
Connection/Installation Connection/Installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.
Connection/Installation • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. 9 (3.
Connection/Installation Installing the unit DNX697S / DNX577S ÑÑNon-Japanese cars 8 A A : Wide B B : Narrow Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ÑÑJapanese cars 6 or 7 Car Bracket 6 or 7 NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). ÑÑTrim plate 1) Attach accessory 8 to the unit.
Connection/Installation ÑÑGPS antenna ÑÑMicrophone unit GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface. 2) Remove the separator of the metal plate (accessory 0). 3) Press the metal plate (accessory 0) down firmly on your dashboard or other mounting surface.
Connection/Installation ÑÑRemoving the trim plate ÑÑRemoving the unit 1) Engage the catch pins on the extraction key (accessory 5) and remove the two locks on the lower level. Lower the trim plate (accessory 8) and pull it forward as shown in the figure. 1) Remove the trim plate. (P.31) 2) Insert the two extraction key (accessory 5) deeply into the slots on each side, as shown.
Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Green/Black Purple To rear right speaker Purple/Black If no connections are made, do not let the cable come out from the tab.
Connection/Installation ÑÑ3-way speaker system setup ÑÑConnecting the system and external components ●● DNX997XR / DNX697S 13 12 11 10 9 8 7 6 5 Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Preout RCA Cable (Sold separately) Power amplifier (optional accessory) Speaker 1 2 3 4 1 AV Audio output (ø3.
Connection/Installation 7 Dashboard camera interface Connect a Dashboard Camera DRV-N520 (optional accessory). (P.36) 8 Accessory 9: GPS Antenna Use the supplied GPS antenna. Using the GPS antenna other than the supplied one may cause a drop in positioning accuracy. ÑÑConnecting an Android smartphone Android smartphone[2] Micro USB to USB cable [2] Accessory 3 (Gray) (1 m) [3][4] Accessory 2 (Black) (1 m) [3] 9 Accessory 4: Bluetooth Microphone 10 3rd view camera input (Yellow).
Connection/Installation ÑÑConnecting an iPod/iPhone iPod/iPhone[2] ÑÑSecuring the USB extension cable Secure the USB extension cable with insulating tape or the like so that its connectors are not disconnected. KCA-iP103 (0.8m)[3] Accessory 3 (Gray) (1 m) [4][5] Accessory 2 (Black) (1 m) [4] USB (Gray) terminal[1][5][6] USB (Black) terminal[1] iPhone (with Apple CarPlay)[2] KCA-iP103 (0.8m)[3] SB maximum power supply current : U DC 5 V = 1.
Connection/Installation ÑÑConnecting the camera Left side view camera and Right side view camera [2] [4] F or HD video, an HD camera is also used as Rear view camera. (DNX997XR only) [7] For HD video, an HD camera is also used as Front view camera.
Appendix 6 Select the view camera to set up. 2 5 Appendix Note for specifications ■■Bluetooth section Frequency : 2.402 – 2.480 GHz Output Power : Power Class2 1 3 4 6 7 1 [Picture quality settings] (DNX997XR) * 1 2 [Picture from view camera] *2 ■■General Operating Voltage : 12 V DC car battery Speaker Impedance :4–8Ω 3 [Front] *2 4 [Dashboard Camera] *2 5 [Right] *2 6 [Left] *2 7 [None] *2 *1 The [REAR VIEW CAMERA] and [FRONT VIEW CAMERA / DASH CAM] setting screens only.
Appendix ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • LDAC and LDAC logo are trademarks of Sony Corporation. • Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society. • Manufactured under license from Dolby Laboratories.
Appendix • THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
■■FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Supplier’s Declaration of Conformity Trade Name: KENWOOD Products: GPS NAVIGATION SYSTEM Model Name: DNX997XR / DNX697S / DNX577S Responsible Party: JVCKENWOOD USA CORPORATION 2201 East Dominguez Street, Long Beach, CA 90810, U.S.A. PHONE: 310 639-9000 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
CORRECTION / CORRECCION Important Notice on Software ■Article 1 (General) ■Article 11 (Export Control) Incorrect I lncorrecto Licensor grants to User a non-exclusive, nonassignable right of use Licensed Software in Japan (except for the exception provided for in Paragraph 1, Article 3). Incorrect I lncorrecto 1 Licensed Software and the associated literature or the like may not be exported to places outside Japan (including transmission outside Japan over the Internet or the like).
Units purchased through the US.A. military exchange service overseas may be service{! under warranty in the continental U.S.A.. subject to the following conditions. 1) The original warranty is in effect. 2) Proof of purchase is provided to the servicer. LIMITATION OF IMPLIED WARRANTIES Any and all implied warranties. including warranties of merchantability and fitness for a particular purpose, shall be limited in duration to the length of this warranty.
JVCKENWOOD Canada Inc. JVCKENWOOD USA Corporation This warranty will be honored only in the U.S.A. WHO IS PROTECTED This warranty is enforceable only by the original purchaser. KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS WHAT WE WILL PAY FOR We will pay for aH labor and material expenses for covered items. Payment of shipping charges is discussed in lhe next section of this warranty.