DNX7280BT DNX5280BT DNX4280BT DNX5580BT GPS NAVIGATION SYSTEM Quick Start Guide © 2010 Kenwood Corporation All Rights Reserved. B59-2048-00_00_DNX7_E_en.
Quick Start Guide About The Quick Start Guide Contents This Quick Start Guide explains the basic functions of this unit. For functions not covered in this guide, refer to the Instruction Manual (PDF file) contained in the included CDROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/ Vista/7 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Precautions Lens fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Quick Start Guide Acquiring GPS signals How To Reset Your Unit The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.
Quick Start Guide First Step Map Data Information One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate or incomplete data.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT 1 2 Touch the corresponding key and set the value. Touch [Finish]. NOTE • For details on operations of each setting, refer to the Instruction Manual. • You can adjust the front panel button (ATT button, etc.) sensitivity of . . For details, refer to Panel Switch Sensitivity (P.68) in the Instruction Manual. Language Select the language used for the control screen and setting items.
Quick Start Guide Basic Operations Functions Of The Buttons On The Front Panel DNX7280BT 10 11 1 2 3 4 5 6 7 8 9 8 B59-2048-00_00_DNX7_E_en.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.92). 2 ATT • Switches attenuation of the volume on/off. 3 ∞, 5 (Vol) Adjusts volume. Holding down a key turns up the volume in series up to 25. For more than 25, pressing the key turns up the volume one by one. 4 AUD • Displays Graphic Equalizer screen (Instruction Manual P.82).
Quick Start Guide DNX5280BT/DNX4280BT/DNX5580BT 1 7 8 9 2 3 4 5 6 12 10 11 10 B59-2048-00_00_DNX7_E_en.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.92). • 2 MENU If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.69). • Displays the Top Menu screen (Instruction Manual P.17). • Pressing for 1 second turns the power off. • When the power off, turns the power on.
Quick Start Guide Common Operations General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source. Icon feature differs depending on the source.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Detaching The Front Panel You can detach the front panel to prevent theft. Press the <0> button for 3 seconds to open the front panel. Then, detach the panel as the diagrams below. Detach the panel as the diagram below. 3 2 1 ● After detaching: Put the panel in the protective bag supplied with the unit. NOTE • To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.
Quick Start Guide How To Use The Navigation System 1 2 Press the
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT 4 Follow your route to the destination. NOTICE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line.
Quick Start Guide Other Features ● Manually avoiding traffic on your route 1) 2) 3) 4) From the map, touch the traffic icon. Touch [Traffic On Route]. If necessary, touch the arrows to view other traffic delays on your route. Touch [Avoid]. ● Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Garmin and Kenwood are not responsible for the accuracy or timeliness of the traffic information.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT How To Play Music You can play audio files from music CD, disc media, USB storage device, SD card and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. 1 Connect the media you want to play as show below. Disc 1) Press the <0> button for 1 second to open the front panel. 2) Insert the disc into the slot. 1) Insert the disc into the slot. Playback starts. ● To eject the disc: 0 Press the <0> button.
Quick Start Guide 2 Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT How To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod, and picture files from USB storage device and SD card. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. 1 2 Connect the media you want to play. For the method of connecting, see How To Play Music (P.17). Control the movie/picture by touching the screen. Each area on the screen has a separate function.
Quick Start Guide How To Listen To The Radio 1 2 3 Touch [Menu] on any screen. Top Menu screen appears. Touch [TUNER]. The unit switches to the radio source. Operate on the source control screen. ● Station search ]. 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [4] or [¢] to tune in the desired station. ● Auto memory 1) Touch [ ]. Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [ ]. 4) Touch [AME].
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT How To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. 1 Register your cell-phone to the unit. Follow the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.53) in the Instruction Manual. 1) Press the button and touch [BT SETUP]. 2) Touch [SET] of [Regist New Device] in the Bluetooth SETUP screen. 3) Touch [PIN Code Set] in the Searched Device List screen.
Quick Start Guide 4 Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Touch [Direct Number]. 2 Enter a phone number with number keys. ]. 3 Touch [ Call using call records 1 Touch [Incoming Calls], [Outgoing Calls], or [Missed Calls]. 2 Select the phone number from the list. 3 Touch [ ]. Redial 1 Touch [Redial] to display the previously called number. ]. 2 Touch [ Call using the phonebook 1 Touch [Phonebook]. 2 Select the name from the list.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Installation Procedure • If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. • Insulate unconnected wires with vinyl tape or other similar material.
Quick Start Guide 2 Make the proper input and output wire connections for each unit. 3 Connect the wire on the wiring harness. 4 Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5 Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6 Connect the wiring harness connector to the unit. 7 Install the unit in your car. 8 Reconnect the - battery. 9 Press the button. 10 Perform the Initial Setup.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Attaching the front panel GPS antenna Hold the front panel securely so as not to drop it accidentally. Fit the panel onto the attaching plate until it is firmly locked. GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface.
Quick Start Guide Microphone unit Removing Procedure 1) Check the installation position of the microphone (accessory 9). 2) Remove oil and other dirt from the installation surface. 3) Install the microphone. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. Removing the hard rubber frame (escutcheon) 1) Engage the catch pins on the removal tool (accessory 4) and remove the two locks on the lower level.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Removing the unit Connector Function Guide 1) Remove the hard rubber frame by referring to step 1 in "Removing the hard rubber frame" (P.26). 2) Insert the two removal tools (accessory 4) deeply into the slots on each side, as shown.
Quick Start Guide Connection Connecting wires to terminals (1) Accessory 9 Accessory 7 Accessory 9 Fuse (15A) Cooling fan Accessory 7 Cooling fan Fuse (15A) Accessory 1 CB 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 2 WARNING for Connecting the ISO Conncetor The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in (1) below.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Connecting wires to terminals (2) Connect to the vehicle’s parking brake detection switch harness. Accessory 1 Light Green (Parking sensor wire) For best safety, be sure to connect the parking sensor. PRK SW Purple/White (Reverse sensor wire) Connect to vehicle’s reverse lamp harness when using the optional rear view camera.
Quick Start Guide System connection Refer to the box1 below Refer to the box2 below Refer to the box2 below Accessory 2 AV input*1 CA-C3AV (Optional accessory) iPod/AV input 2 CA-C3AV (Optional Accessory) Green/Red To Camera control terminal Green/White Blue/Red To Relay Box Blue/Red Accessory 4 *1 DNX4280BT only 1 Rear View Camera Input - Yellow (Visual Input) Audio/Visual Output - Yellow (Visual Output) - White (Audio Left Output) - Red (Audio Right Output) 2 Rear Preout - Red (Audio Right O
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Optional accessory connection iPod (commercially available) USB device (commercially available) When you use KCAiP22F with , insert the AV output cable to the front panel of the unit. KCA-iP202/KCA-iP22F (Optional Accessory) USB terminal (0.8m) AV Output - KCA-iP202: 1.8 m - KCA-iP22F: 0.
Quick Start Guide ■■The marking of products using lasers About This Unit CLASS 1 LASER PRODUCT ■■Copyrights • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, Kenwood declares that this unit DNX7280BT, DNX5580BT, DNX5280BT, DNX4280BT is in compliance with the essential requir
B59-2048-00_00_DNX7_E_en.
B59-2048-00_00_DNX7_E_en.
B59-2048-00_00_DNX7_E_en.
