&CAUTION Be sure to attach the protective cover and fix with the screws. If the protective cover is not attached, this unit will not turn on. I l Certifique-se de que manta a tampa de prote<;ao e a fixa com os parafusos. Se a tam pa de prote<;ao nao estiver colocada, esta unidade nao se liga. &ATTENTION & OCTOPO>KHO! Veillez a placer le cache de protection et a fixer avec les vis. O6fl3aTe/lbHO ycraH0B1,ne 3al.J..1111THYIO KpblWKY 111 3aKpen111Te ee s111HTaM111.
DNR1007XR GPS NAVIGATION SYSTEM INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . • The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference. Take the time to read through this instruction manual.
Contents Before Use 4 USB/SD 27 Precautions.................................................................... 4 Connecting a USB device.......................................27 Safety Precautions and Important Information................................ 5 Inserting the SD.........................................................27 How to read this manual.......................................... 6 Search Operation.......................................................
Bluetooth Control 51 Remote control 86 Information for using Bluetooth® devices........51 Battery Installation....................................................86 Register the Bluetooth device..............................52 Functions of the Remote control Buttons........86 Bluetooth Setup.........................................................54 Playing the Bluetooth Audio Device..................55 Using the Hands-Free Unit.....................................57 Hands-Free Setup.............
Before Use Before Use Precautions # WARNINGS ÑÑTo prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metallic tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your KENWOOD dealer.
Before Use Safety Precautions and Important Information Read this information carefully before starting to operate the KENWOOD Car Navigation System and follow the instructions in this manual. Neither KENWOOD nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual. # WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.
Before Use How to read this manual • The screens and panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual screens or panels, or some display patterns may be different from the actual ones. • Display language: English is used for the purpose of explanation. You can select a display language from the [SETUP] menu. See System Setup (P.72).
Basic Operations Basic Operations Functions of the Buttons on the Front Panel 8 1 Number 2 3 4 5 Name 6 7 Motion 1 Remote Sensor • Receives the remote control signal. 2 HOME/[ • Displays the HOME screen (P.11). • Pressing for 1 second turns the power off. • When the power is off, turns the power on. 3 NAV/ CAMERA • Displays the navigation screen.
Basic Operations Number Name 8 SD card slot Motion • A slot to insert an SD card. • You can play audio/visual files in the card. *1 • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. *2 *1 If the map update file remains in the SD card, you cannot play audio/visual files. *2 The system of the unit is rebooted after inserting/removing the MAP SD. Turning on the Unit 1 Press the [HOME]/[ ] button. hh The unit is turned on.
Basic Operations Initial Settings ■■ [OEM SETUP] This function requires a commercial adaptor. Consult your KENWOOD dealer for details. Initial SETUP Perform this setup when you use this unit first time. 1 Set each item as follows. ■■ [Locale] Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set. 1 Touch [Locale]. 2 Select the desired country. ■■ [Language] Select the language used for the control screen and setting items.
Basic Operations ■■ [Time Zone] If you have selected [Manual] for Clock, select the time zone. ■■ [Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.10) Adjusting the volume You can adjust the volume (0 to 40). Turn the knob clockwise to increase, and counter-clockwise to decrease. NOTE • Please set the date and time. If they are not set, some functions may not work. Adjust the date and time manually 1 Touch [Clock] in the System setting menu. 2 Select [Manual].
Basic Operations HOME screen descriptions Most functions can be performed from the HOME screen. Popup menu 1 Press the [MENU]/[ATT] button. hh Popup menu appears. 2 Touch to display the popup menu. 1 2 3 4 1 • Widget (P.20) 2 • Displays the source selection screen. (P.12) 3 • Displays the SETUP Menu screen. (P.68) 4 • Short-cut playback source icons (P.13) 1 The contents of the menu are as follows. • Displays the Screen Adjustment screen. (P.68) • Turns the display off. (P.
Basic Operations Turn off the screen Select the playback source 1 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 Touch [ ]. From the screen, you can select the following sources and functions. Select [Display OFF] on the popup menu. NOTE • Touch the display to turn on the screen. • To display the clock while the screen is off, it is necessary to set "OSD Clock" to "ON". (P.70) • Displays the navigation screen. (P.15) • Switches to the Apple CarPlay screen from the connected iPhone. (P.
Basic Operations *1 When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. If Apple CarPlay or Android Auto are connected during talking by the Bluetooth device or iDatalink phone, the current call will be continued. *2 You can use the [AV-IN] source when a cable from a visual source except a camera is connected to the Video input terminal, and a cable is connected to the AV Audio input terminal. (P.
Basic Operations Source control screen descriptions * For right hand drive vehicles, the left and right drawers are swapped. For how to set up the driving position, see User Interface Setup (P.71). There are some functions which can be performed from most screens. 6 List screen 5 There are some common function keys in the list screens of most sources. See (P.29, 33, 56). 8 7 4 Display the list screen For USB/ SD/ iPod: 1 1 2 3 1 Displays the source selection screen. (P.
Basic Operations How to Use the Navigation System etc. 3 Keys with various functions are displayed here. • : Plays all tracks in the folder containing the current track. • : Jumps to the letter you entered (alphabetical search). • : Moves to the upper hierarchy level. 1 Operate the desired function from the Main Menu screen. 1 2 Text scroll 4 4 Scrolls the displayed text. 5 [ ]/[ ]/[ ]/[ ] Page scroll You can change pages to display more items by touching [ ]/[ ].
Basic Operations 3 NOTE NOTE • To enter letters contained in the name, touch the Search bar and enter the letters. • Touch and drag the map to view a different area of the map. • A speed limit icon could appear as you travel on major roadways. Follow your route to the destination. NOTE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times.
Basic Operations ■■Updating maps You can purchase updated map data from Garmin. 1 Go to https://kenwood.garmin.com/ kenwood/site 2 From the Map Updates section, select Update 3 Follow the on-screen instructions. Navigation Setup 1 Touch [ ] on the navigation screen. 2 Touch [SETUP]. hh SETUP Menu screen appears. Bottom bar on the navigation screen descriptions 3 Touch [Navigation]. hh Navigation setting menu appears. There are some functions which can be performed from the navigation screen.
Basic Operations KENWOOD Traffic Powered By INRIX You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android smartphone. –– iPhone: Search for "KENWOOD Traffic Powered By INRIX" in the Apple App Store to find and install the most current version.
Basic Operations Alert Message This function is to receive alert messages. First, you need to turn on the “Emergency Alerts” on the HD Radio source control screen. (P.35) When an Alert Message comes 1 2 Display of the received Alert Message You can read the received alert message afterward. 1 Touch [ ] on the right side of the HD Radio source control screen. Touch [Alert Message Log]. 2 Select the desired Alert Message from the list. 3 1 • The alert message is erased.
Widget Widget Widget 1 2 Drive Widget Panel You can change the widget. Press the [HOME]/[ ] button. You can change the widget or customize the widget area. 1 2 Press the [HOME]/[ ] button. Touch the right top corner of the drive widget panel. 1 2 3 1 Full screen widget panel You can change the full screen panel widget by flicking left or right on the widget panel. The widget is switched in the following sequence: Garmin Map, Album Art, Visualizer, Photo Frame.
Widget 1 2 Touch and hold the drive widget panel. hh Widget customize mode is activated. Drag the drive widget to right or left. Weather Widget You can display the weather forecast of the present location. Preparation • See KENWOOD Traffic Powered By INRIX (P.18). Importing Image Files You can display image files stored in your iPhone or Android smartphone by connecting your iPhone or Android smartphone in which the “KENWOOD Portal APP” application is installed to this unit.
APPS APPS Wireless Mirroring Operation You can display the same screen of the Android smartphone on the monitor of the unit using the Wireless Mirroring function of the Android smartphone. Preparation • You can use the Wireless Mirroring function with Android smartphones compatible with this function. • This function may be called Wireless Display, Screen Mirroring, AllShare Cast, etc., depending on the manufacturer. • The settings on the Android smartphone differ depending on the device type.
APPS Wireless connection You can select the iPhone registered in [Device List] and use it as the Apple CarPlay device. See Register the Bluetooth device (P.52). NOTE • Turn on the Bluetooth function and Wi-Fi function of an iPhone. • If two or more iPhone have been registered, select the iPhone to be used as the [Apple CarPlay] source. (P.23) • It is necessary to connect the GPS antenna in order to use a wireless Apple CarPlay. • When the Wi-Fi connection becomes unavailable, the HOME screen is displayed.
APPS ÑÑUse Siri Android Auto™ Operation You can activate Siri. 1 Press the [VOICE] button. 2 Talk to Siri. Compatible Android smartphones You can use Android Auto with Android smartphones of Android version 5.0 or later. For Wi-Fi connection, Android 8.0 or later. To deactivate 1 Press the [VOICE] button. ÑÑSwitch to the Apple CarPlay screen while listening to another source 1 Android Auto enables you to use the functions of your Android smartphone convenient for driving.
APPS ÑÑConnect Android smartphone Wired connection 1 2 3 4 5 Connect an Android smartphone via the USB terminal. (P.100) To use the Hands-Free function, connect the Android smartphone via Bluetooth. When an Android smartphone compatible with Android Auto is connected to the USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth Hands-Free phone currently connected is disconnected. Unlock your Android smartphone. Press the [HOME]/[ ] button. Touch [ ].
APPS ÑÑUsing voice control 1 Press the [VOICE] button. 2 Start speaking. NOTE • When you press and hold the [VOICE] button while inputting voice, you can start over from the beginning. To cancel 1 Press the [VOICE] button. ÑÑSwitch to the Android Auto screen while listening to another source 1 Press the [ ] button. NOTE • When listening to another source with the Android Auto screen displayed, playing music in the Android Auto mode will switch the current source to the Android Auto source.
USB/SD USB/SD Connecting a USB device Inserting the SD 1 Connect the USB device with the USB cable. (P.99) 1 Tilt the panel toward you manually. 2 3 4 Press the [HOME]/[ ] button. 2 Insert the SD card into the slot until it clicks. 3 4 5 6 Close the panel. Touch [ ]. Touch [USB]. (P.12) ÑÑDisconnect the USB device 1 2 3 Press the [HOME]/[ ] button. Touch a source other than [USB]. Detach the USB device. ÑÑUsable USB device You can use a mass-storage-class USB device with this unit.
USB/SD USB/SD Basic Operation •[ ] : Repeats the current track/folder. Each time you touch the key, repeat modes are switched in the following sequence: File repeat ( ), Folder repeat ( ), Repeat ) all ( •[ ] : Randomly plays all tracks in the current folder. Each time you touch the key, random modes are switched in the following sequence: ), Random off ( ) Folder random ( Most functions can be controlled from the source control screen and playback screen.
USB/SD Search Operation Video screen You can search music or video files by the following operations. 8 8 1 2 Touch [1]. 3 Select a list type. Touch [S]. 9 8 File search area (Video file only) Touch to search for the next/previous file. 9 Key display area (Video file only) Touch to display the control screen. NOTE • For operations on the list screen, see List screen (P.14). ÑÑCategory search You can search for a file by selecting a category. 1 2 3 Touch [Category List].
USB/SD ÑÑLink search (Audio file only) You can search for a file of the same artist/ album/genre as that in the current track. 1 2 Touch [Link Search]. Touch the desired tag type. You can select from artists, albums and genres. hh The list corresponding to your selection appears. 3 Touch the desired item in the content list. ÑÑFolder search You can search for a file according to hierarchy. 1 2 Touch [Folder List]. Touch the desired folder. When you touch a folder its contents are displayed.
iPod/iPhone iPod/iPhone Preparation 1 Connect the iPod/iPhone using the KCAiP103. (P.100) ÑÑConnectable iPod/iPhone 2 3 4 Press the [HOME]/[ ] button. The following models can be connected to this unit. Made for • iPhone XS Max • iPhone XS • iPhone XR • iPhone X • iPhone 8 Plus • iPhone 8 • iPhone 7 Plus • iPhone 7 • iPhone SE • iPhone 6s Plus • iPhone 6s • iPod touch (6th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.kenwood.com/cs/ce/ipod/.
iPod/iPhone iPod/iPhone Basic Operation 2 Content list • Touch the left side of the screen to display the Content list. Touch again to close the list. • Displays the playing list. When you touch a track/file name on the list, playback will start. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switch the operation mode (P.86). NOTE • The Content list is not displayed unless you select a file from the category list and play it.
iPod/iPhone Search Operation You can search music files by the following operations. 1 2 Touch [1]. 3 Select a list type. Touch [S]. ÑÑLink search You can search for a file of the same artist/ album/genre/composer as that in the current track. 1 2 NOTE • For operations on the list screen, see List screen (P.14). Touch [Link Search]. Touch the desired tag type. You can select from artists, albums, genres and composers. hh The list corresponding to your selection appears.
HD Radio™ Tuner HD Radio™ Tuner HD Radio Tuner Basic Operation 1 Operation keys • [E] [F] : Tunes in a station. The method of switching frequencies can be changed (see 4 Seek mode). • [CHS] [CHR] : Selects a channel. • [1] : Display the Channel List screen. See Channel search (P.37). Most functions can be controlled from the source control screen. To listen to the HD Radio source, touch [HD Radio] icon on the source selection screen. (P.12) • [ ] : Display a list of registered bookmarks.
HD Radio™ Tuner • [Emergency Alerts] : Turn on or off the alert message. See Alert Message (P.19). • [Alert Message Log] : Displays the alert message received. See Alert Message (P.19). 6 Picture • The picture data or station Logo data is displayed if available from current content. 7 Information display • Displays the information on the current station: Frequency and Channel Touching [ ] allows you to switch between Content A, Content B and Content C.
HD Radio™ Tuner Receive Mode 2 Touch [ ] on the right side of the screen. Touch [AME]. 3 Touch [Yes]. You can set the radio broadcasts receive mode. 1 2 Touch [ ] on the right side of the screen. Touch [RCV]. Select a receive mode. hh Auto memory starts. ÑÑManual memory You can store the currently being received station or channel in the memory. ■■ [Auto] Switch between digital and analog audio automatically. 1 Select the station or channel you wish to store in the memory.
HD Radio™ Tuner ÑÑDirect search 2 Select the desired content from the list. You can tune in by entering the desired frequency or channel number. 1 Touch [ ] on the right side of the screen. Touch [10key Direct]. NOTE • Touch [Info Change] in the channel list. Select the sequence of the list (Song title, artist name, album name). 2 Select the search method. ÑÑSearch by program type (FM only) You can tune in the station broadcasting the specified type of program when listening to FM.
HD Radio™ Tuner Bookmark Stores tag information (title, artist, album, URL, and description) about the song you are listening to now. Detailed information and QR codes can be displayed according to the stored tag information. ÑÑBookmark registration 1 Touch [ Touch [ ■■ [ Delete] Deletes the bookmarks being displayed. Touch [Delete] and then touch [YES] on the confirmation screen. ] on the right side of the screen. ]. Bookmark delete Deleting a bookmark. 1 Touch [Delete].
SiriusXM® SiriusXM® SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. To listen to the SiriusXM source, touch the [SiriusXM] icon on the source selection screen. (P.
SiriusXM® 3 Information display • Displays the information on the current channel: Channel Name P#: Preset number #CH: Channel number Logo: Channel logo Touching [ ] allows you to switch between Content A, Content B and Content C. Content A: Artist Name, Song Title Content B: Content Info, Category Name Content C: Channel Description, Similar Channels [ ] : Touch for 2 seconds to register the artist of the current song as a Content Alert.
SiriusXM® Storing Channels in Preset Memory You can store the current channel in memory. 1 Tune in the channel you wish to store in the memory. 2 Touch [ 3 Direct search You can tune in a channel directly. 1 Touch [ ] on the right side of the screen. Touch [Direct Channel]. 2 Enter the channel number and touch [Enter]. ] on the left side of the screen. Touch [SXM(1-4) P(1-6)] in which you want to store the channel for 2 seconds until a beep sounds.
SiriusXM® Category/Channel search Replay You can specify the desired category and select a channel. You can replay the last 60 minutes of the program from the current channel. 1 Touch [1]. 1 2 Select a category. ■■ [E] [F] Press to skip to the previous/next track. Press and hold to rewind or fast forward. (It will be cancelled automatically after about 50 seconds.) hh Channel list appears. 3 Touch [Replay] on the function panel. ■■ [DH] Plays or pauses.
SiriusXM® To return to live music/content 1 2 Touch [ ] on the right side of the screen. Touch [Live]. TuneMix™ TuneMix™ plays a unique blend of songs from your Preset music channels of the current SiriusXM Preset Band, allowing you to build a custom channel from as few as two to as many as 6 music channels. You can even skip songs you don’t want to hear.
SiriusXM® Traffic & Weather Now™ Traffic & Weather Now™ allows you to access the latest report whenever you want to hear it. First select your city in the set up menu. See Select a City for Traffic & Weather (P.50). 1 Touch [ 2 Touch [Traffic & Weather]. The report starts from the beginning. To stop and return to the previous channel, touch it again. Indicator display • (White) : Played already. • (Green) : New information arrived. • (Purple) : Playing. • (Gray) : No information.
SiriusXM® SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams. Choose to tune in and hear the play unfold like it was live. Continue listening to the game or return to your previous channel. 1 SiriusXM SETUP 1 Touch [ ] on the right side of the screen. Touch [SETUP]. When a big play happens during one of the games, an Alert screen appears. ■■ [Listen] Touch to tune in that channel and play back the big play.
SiriusXM® ÑÑParental code ÑÑParental Control You can set a SiriusXM parental code for Parental Control. Parental Control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected channels. 1 Touch [Parental Code] on the SiriusXM SETUP screen. hh Parental Pass Check screen appears. NOTE • The code number is set to “0000” as default. 2 1 Touch [Parental Control] on the SiriusXM SETUP screen. 2 Touch [User], [Mature] or [OFF].
SiriusXM® NOTE 3 • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. 4 Touch each channel in the list and set to ON or OFF. Touch each channel on the list and set to ON or OFF. [ON]: Locks the channel. [OFF]: Unlocks the channel. NOTE • To delete the skip channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. • Touch [Info Change].
SiriusXM® 3 Touch each content list item you want to check or uncheck. To select a Team Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ 1 Touch [My Games]. 2 Touch the desired league in the list. 3 Touch the team(s) in the list you want to select. NOTE • You can select (þ) up to 60 artists or songs. ●● To delete the Artist and Song 1 Touch [Delete]. 2 Touch the content(s) in the list you want to select. ■■ [þ All] Selects all contents.
SiriusXM® ÑÑSportsFlash™ setup 5 Touch [ ] twice. Activating SportsFlash 1 Touch [SportsFlash] on the SiriusXM SETUP screen. hh SportsFlash is turned on or off. Default is “ON”. Selecting SportsFlash Beep 1 Touch [SportsFlash Beep] on the SiriusXM SETUP screen. hh SportsFlash Beep is turned on or off. Default is “ON”. ■■ [Edit] Sets and removes teams. ■■ [Priority] Sets the priority of a team. Selecting the teams for SportsFlash 1 Touch [SportsFlash Team Set] on the SiriusXM SETUP screen.
SiriusXM® 3 Touch [Done]. ÑÑSelecting Featured Bands Update Messages You can set whether to be notified when the featured seasonal theme is updated. 1 Touch [Featured Bands Update Messages] on the SiriusXM SETUP screen. Featured Bands Update Messages is turned on or off. ÑÑTuneStart™ NOTE • Priority can be set on up to 5 teams. • When priority has already been set for 5 teams, it cannot be set for any other team. Delete an unnecessary team.
Bluetooth Control Bluetooth Control Using the Bluetooth function allows you to use various functions such as listening to the audio file and making/receiving a call. Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as smartphones/cell-phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communication with each other.
Bluetooth Control Register the Bluetooth device It is necessary to register the Bluetooth audio player or smartphone/cell-phone in this unit before using the Bluetooth function. You can register up to 10 Bluetooth devices. ■■ [Android Auto] To connect as Android Auto source. 7 Touch [ ]. hh Bluetooth pairing waiting dialog appears. NOTE • Up to 10 Bluetooth devices can be registered.
Bluetooth Control 10 Touch [Yes]. When data transmission and connection have completed, the Bluetooth connection icon appears on the screen. To switch the connected device to a Bluetooth device 1 Touch [Bluetooth] on the Device List screen. hh Bluetooth device list appears. 2 Touch the name of the Bluetooth device you want to connect. 3 Set each profile as follows. NOTE • When registering the iPhone that is available for Apple CarPlay wirelessly, a confirmation message appears.
Bluetooth Control 2 Touch the device name to check. 5 Touch [Bluetooth] and set to [ON]. See the following section for each setting. • Change the PIN Code (P.54) • Change the device name (P.54) • Change the settings for Hands-Free function, see Hands-Free Setup (P.62). NOTE • For the other setting items on this screen, see Connections & AV Setup (P.68). ■■ [þ All] Selects all Bluetooth devices. ■■ [¨ All] Clears all check marks.
Bluetooth Control Playing the Bluetooth Audio Device 2 Information display * Most function can be controlled from the source control screen. To select Bluetooth source, touch [Bluetooth] icon on the source selection screen. (P.12) NOTE • The Bluetooth audio source is disabled while using Apple CarPlay. • The Bluetooth audio source is disabled when the device set as Audio(A2DP)/App(SPP) is using Android Auto.
Bluetooth Control ÑÑKENWOOD Music Mix Up to 5 Bluetooth audio device can be connected and switched easily to play music. 1 Touch [ ]. hh A list of registered devices is displayed. 2 Touch [ ] of device name you want to connect. • Touching [ ] displays the Device List screen. (P.53) ] on the left of the • Touching [ connected device ([ ]) disconnects this device. • • 3 Touch [ ] (White/dark blue background) on the left of the name of the device to be played.
Bluetooth Control Using the Hands-Free Unit 4 Select a dialing method. You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used. Only the Apple CarPlay or Android Auto Hands-Free function can be used. ÑÑMake a call 1 Press the [HOME]/[ ] button. 2 3 Touch [ ]. Touch [TEL].
Bluetooth Control Call using call records 1 2 Touch [ 5 Select the phone number from the list. ]. Select the phone number from the list. NOTE Call using the phonebook 1 2 3 Touch [ Touch [ ]. ]. Select the initial. • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.62). • When Russian is selected in “Language Select” (P.72), you can switch between English keyboard and Russian keyboard. • When Hebrew is selected in “Language Select” (P.
Bluetooth Control Call by entering a phone number ÑÑReceive a call 1 2 Touch [ 1 3 Touch [ ]. ÑÑVoice Recognition You can access the voice recognition function of the smartphone/cell-phone connected to this unit. You can search the smartphone/cellphone phonebook by voice. (The functionality depends on the smartphone/cell-phone.) 1 [ Enter a phone number with number keys. ]. Press the [VOICE] button. Touch [ ] to answer a phone call or ] to reject an incoming call.
Bluetooth Control ÑÑOperations during a call ●● Call-waiting When you receive a new call while talking on the phone, you can answer the newly received call by touching [ ]. The current call is put on hold. Each time you touch [ ], the caller will change to the other one. When you touch [ ], the current call will end to be switched to the call waiting on hold. ●● Adjust the volume of your voice 1) Touch [Speech Quality]. 2) Touch [T] or [U] for [Microphone Level].
Bluetooth Control ÑÑPhone number preset ÑÑPhonebook transfer You can register frequently used phone numbers in this unit. You can transfer phonebook data from your Bluetooth smartphone using PBAP. 1 2 1 2 Touch [ ]. Touch [Edit]. Touch [ ]. Touch [ ]. hh Phonebook data transfer starts. 3 Select where to preset. ■■ [Delete all] To delete all preset numbers, touch [Delete all] and then touch [Yes] on the confirmation screen. 4 Select how to preset.
Bluetooth Control Hands-Free Setup ■■ [Auto Response]* Set the automatic response time to pick-up an incoming call. [OFF ](Default): Turns off the Automatic response function. [1]/[5]/[10]/[15]/[20]/[25]/[30]: Sets the ringing time (second). You can make various settings for the HandsFree function. 1 2 3 Press the [HOME]/[ ] button. 4 Touch [Connections & AV]. Touch [ ].
Other External Components Other External Components View Camera 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline *2 NOTE • To connect a camera, see Connecting the camera (P.101). • To use a rear view camera, a REVERSE lead connection is required. (P.97) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position.
Other External Components ■■ [Rear Camera Message] *1 [Always display] (Default): Always displays the caution message on the rear camera interruption screen. [Clear after 5 seconds]: Displays the caution message for about 5 seconds on the rear camera interruption screen. ÑÑTo set up the camera assignment settings 1 Touch [Camera Assignment Settings] in the Camera setting menu. (P.63) 2 Select the item to set up. ■■ [Rear Camera Settings] * Adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set.
Other External Components *1 Except the [REAR VIEW CAMERA] setting screen. *2 The [REAR VIEW CAMERA] setting screen only. *3 The [REAR VIEW CAMERA] and [FRONT VIEW CAMERA / DASH CAM] setting screens only. *4 The [FRONT VIEW CAMERA / DASH CAM] and [3rd VIEW CAMERA] setting screens only. 4 Touch [Enter]. NOTE • The screen shot above is for the [FRONT VIEW CAMERA / DASH CAM] setting screen. It may be different from the ones for [REAR VIEW CAMERA], [3rd VIEW CAMERA] and [VIDEO IN].
Other External Components ÑÑDisplay the dashboard camera ÑÑAdded function 1 Press the [MENU]/[ATT] button. hh Popup menu appears. Display the map while playing the recorded file 2 Touch [Camera]. screen 1 Play the recorded file. See the instruction manual of the Dashboard Camera. 2 Touch [ ]. 1 3 2 1 Camera Switching Keys Touch to switch the view camera. It is necessary to set “Camera Assignment Settings” beforehand except “Rear”. See To set up the camera assignment settings (P.64).
Other External Components HDMI source 1 2 3 Connect your smartphone to the HDMI input terminal. (P.98) Use HDMI cable KCA-HD100 (optional accessory). Select [HDMI] as the source. (P.12) Start an application or playback on your smartphone. OEM Features Operation This unit can display vehicle information when connected to the bus system of the vehicle using an iDatalink (commercially available). 1 Press the [HOME]/[ ] button. hh HOME screen appears.
Setup Setup 1 2 3 Press the [HOME]/[ ] button. ■■ [Backlight]/[Contrast]/[Black]/ [Brightness]/[Color]/[Tint] Adjust each setting. Touch [ ]. ■■ [Aspect] Select a screen mode. [Full]: Changes the aspect ratio of video and displays video fully on the screen. [Normal]: Displays video at the ratio of 4:3. [Auto]: USB device and SD card: Displays video fully (vertically or horizontally) with no ratio change. Touch [SETUP]. • • • • • • See the following section for each setting.
Setup • If you select SD as the main source, you cannot select iPod or USB as the AV output source. • If you select HDMI as the main source, files with sampling rates higher than 96 kHz in USB or SD selected as the AV output source are skipped. • If you select Bluetooth audio, HD Radio, Wireless Mirroring, Apple CarPlay or Android Auto as the main source, you cannot select USB, SD or iPod as the AV output source. ■■ [Device Name] If you select [ON] for [Bluetooth], you can change the Bluetooth device name.
Setup Display & Button Setup ÑÑCustomizing the button color You can set the button illumination color. 1 2 3 Press the [HOME]/[ ] button. 4 Touch [Display & Button]. hh Display & Button setting menu appears. 5 Set each parameter as follows. 1 Touch [Button Illumination Color] in the Display & Button setting menu. 2 Touch the desired color. Touch [ ]. Touch [SETUP]. hh SETUP Menu screen appears. ■■ [Variable] You can set the button color to continuously scan through the color spectrum.
Setup ÑÑChange the wallpaper image or For how to set the button illumination color and create an original color, see Customizing the button color (P.70). “ON”/“OFF” (default) color 1 Touch [Wallpaper Customize] in the Display & Button setting menu. 2 Select an image. *1 When [Button Illumination Color] is “Variable”, this option is fixed to OFF. 3 Touch [ ]. To register an original image *1 *2 *3 *1 The album art currently being displayed is used as a wallpaper.
Setup ■■ [Parking Assist Display] When the iDatalink (commercially available) is connected, you can display information about obstacles around the car. [ON]: Always displays information. [Dyn.] (Default): Displays information when the sensor detects obstacles. [OFF]: Cancels this function. This can be set when the iDatalink (commercially available) is connected. ■■ [Parking Assist Position] Select where to display information about obstacles on the screen (left or right).
Setup ÑÑSoftware Information You can confirm the software version of this unit. 1 Touch [Software Information] in the System setting menu. 2 Confirm the software version. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 2 3 Press the [HOME]/[ ] button. Touch [ ]. Touch [Audio]. 3-way speaker system setup Select the appropriate crossover network mode for the speaker system used (2-way or 3-way speaker system). # CAUTION • Connecting 3-way speakers with the 2-way mode selected can break the speakers. • • • • • • • See the following section for each setting. Set up Speaker / X’over (P.
Controlling Audio NOTE • When the 3-way speaker system is selected, the following functions are disabled. –– Front focus of Listening Position / DTA –– Fader for Controlling General Audio –– Zone Control –– Selection of the speakers to output sound from the smartphone/cell-phone of Bluetooth HF/ Audio –– Beep for User Interface Setup • While talking on the paired phone or using the voice recognition function, the speaker system cannot be switched.
Controlling Audio When Speaker network is set to 3-way: 2 1 2 ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. If you have no speakers, select “None”. When the speaker type and size are selected, the speaker crossover network is set automatically. Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 2 3 Press the [HOME]/[ ] button. 4 5 Touch [EQ / SW Level]. Touch [ ]. Touch [Audio]. hh Audio screen appears.
Controlling Audio ÑÑSave the EQ curve 1 2 3 Adjust the EQ curve. Touch [Memory]. Select where to save. Listening Position / DTA Listening Position / DTA allows you to improve the sound field depending on the position of the seat you sit. Listening Position / DTA allows you to set “Listening Position” and “Front Focus”. You cannot set both at the same time. 1 2 3 Press the [HOME]/[ ] button. 4 Touch [Position / DTA]. Touch [ ]. Touch [Audio]. hh Audio screen appears. • Set up Listening Position (P.
Controlling Audio Position DTA control You can fine-adjust your listening position. 1 2 3 Touch [Adjust]. 4 5 Touch [Level]. ÑÑFront Focus You can focus the imaginary sound image on the front of the selected seat. Touch [Delay]. 1 Touch [Front Focus] in the Position / DTA screen. Touch [T] or [U] to adjust the delay time of the selected speaker. 2 Select a front focus position. For [Front All] and [All], select Priority L or R depending on which side you want to put the imaginary sound image.
Controlling Audio ■■ [Size of the Virtual Sound Field] Adjust the size of sound image to meet your taste. If the sound image is shifted from the front, move it back by [Sound Image LR (Front)] or [Sound Image LR (Rear)]. ■■ [Subwoofer Delay] Adjust the delay time of subwoofer sound. 4 5 Touch [Level]. Touch [T] or [U] to adjust the sound level of the selected speaker. Fader / Balance / Zone Control 1 2 3 Press the [HOME]/[ ] button. 4 Touch [FAD / BAL / Zone]. Touch [ ]. Touch [Audio].
Controlling Audio ÑÑZone Control You can select different sources for front and rear positions in the vehicle. 1 Touch [Dual Zone] on the FAD / BAL / Zone screen. ■■ [Source] You can switch the current source. 2 Set each source as follows. ■■ [Zone Select] Touch [Single Zone] to turn off the dual zone function. ■■ [Front Source], [Rear Source] Select an audio source for each. Rear Source; “AV-IN”/“iPod”/“SD”/“USB”/“OFF” ■■ [Rear VOL.] Adjust the rear source volume.
Controlling Audio Volume Offset 5 Set each parameter as follows. Finely adjust the volume of the current source to minimize the difference in volume between different sources. 1 2 3 Press the [HOME]/[ ] button. 4 5 Touch [Volume Offset]. Touch [ ]. Touch [Audio]. hh Audio screen appears. Touch [+] or [-] to adjust the level. ■■ [Bass Boost] Set the amount of bass boost “OFF”/“1”/“2”/“3”. ■■ [Loudness] Set the amount of boost of low and high tones.
Controlling Audio Parametric Equalizer In addition to the conventional Graphic Equalizer, this unit has a parametric equalizer, which allows you more precise adjustments. By using each equalizer properly, you can calibrate the unit more thoroughly. Adjustment using this function requires expertise. When to Use Each Function ●● Parametric Equalizer Use this to finely correct or improve the frequency characteristics of the acoustics of the car in order to establish a basis for adjustments.
Controlling Audio ●● High-Pass Filter Passes signals with frequencies higher than a certain frequency (fc: cutoff frequency) and attenuates signals with frequencies lower than the cutoff frequency. Use this to pass only high-frequency signals. Use this in the following cases for example: ––For extracting the frequency band for separate tweeters. By extracting the specific frequency band, level adjustment can be made to the frequency band individually.
Controlling Audio ÑÑAdjust the Parametric Equalizer Preparation • Correct the value in “Listening Position” and “Front Focus” before adjusting the parametric equalizer. See Listening Position / DTA (P.77). 1 2 3 4 5 Touch [ ]. 4 Affects All Speakers *1 Touch [Audio]. • [ON]: Outputs sound from all speakers. • [OFF]: Outputs sound from the currently selected speaker only. Touch [Sound Effect]. Set the Parametric EQ to [ON] and touch [Yes]. 5 [Initialize] / [Flat] Touch [SETUP].
Controlling Audio 10 When you have finished adjustments, save the results as a preset, and check the effects by switching presets or turning the Parametric EQ [ON] and [OFF]. 11 Use the Graphic Equalizer to make final adjustments. (P.76) Audio Setup memory Audio Control settings can be memorized. The memorized settings can be recalled at any time. 1 2 3 Press the [HOME]/[ ] button. 4 Touch [Audio Memory]. Touch [ ]. Touch [Audio]. hh Audio screen appears.
Remote control Remote control This unit can be operated using the remote control KNA-RCDV331 (optional accessory). # CAUTION • Risk of fire or explosion if the battery is replaced by an incorrect type. Ensure to replace only with the same type. • Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is left in an extremely high temperature surrounding environment and/or subjected extremely low air pressure.
Remote control ÑÑDirect search mode ÑÑBasic Operation Using the remote control, you can jump directly to the desired channel by entering the number corresponding to the content. NOTE • This operation cannot be performed for the USB device and iPod. 1 Press the [#BS] button several times until the desired content appears. The available contents are different depending on the source type.
Remote control Key Name 88 Mode switch Function 13 C/D AUD 14 Numeric Keypad AUD 15 16 *+ − # BS AUD 17 18 19 20 21 22 23 24 25 26 AUDIO − Switches to the direct search mode. For details on the direct search mode, see Direct search mode (P.87). Not used. CANCEL NAV Cancels the operations. SUBTITLE − Not used. Selects the track or file to be played. For the HD Radio and SiriusXM sources, switches to broadcast stations received by the unit.
Connection/Installation Connection/Installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.
Connection/Installation ÑÑSupplied accessories for installation 1 x1 Cooling fan • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth/Wi-Fi antenna.
Connection/Installation = x1 ~ (Ø3 x 6 mm) (Black) x2 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal. 3) Make the proper input and output wire connections for each unit. 4) Connect the speaker wires of the wiring harness. 5) Connect the wiring harness wires in the following order; ground, battery, ignition.
Connection/Installation Installing the unit ÑÑConfirm the installing position of the display unit ●● Vehicles cannot be installed It may be possible to install if it can avoid the following by adjustment for slider position and display height. Lever operations are interfered such as shift lever, wiper lever, winker lever when install the unit. A hazard switch is hidden from a driver seat. The display unit hits a panel on the vehicle.
Connection/Installation ÑÑPositioning the slider in 4 forward 1 Remove the four screws from the bottom of the main unit. Install the bracket for forward position (accessory 0) each side so that its projections are aligned with the slots on the main unit. 0 Projection Screw Projection 5 Main unit 2 Remove the two cover for back position, and then remove the two hexagon head screws from the bracket for back position.
Connection/Installation ÑÑAdjusting the display height ÑÑGPS antenna 1 GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface. 2) Remove the separator of the metal plate (accessory 7). 3) Press the metal plate (accessory 7) down firmly on your dashboard or other mounting surface.
Connection/Installation ÑÑMicrophone unit 1) Check the installation position of the microphone (accessory 3). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 3), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 3) to the driver. 4 5 Reinstall the removed parts such as a panel on the vehicle.
Connection/Installation 8 Attach the protective cover (accessory =) to coupling part, and then fix it with two binding head screws (accessory ~). ~ = NOTE • If the protective cover (accessory =) is not attached, this unit will not turn on. Even if the unit is turned on, the power may be turned off halfway. Be sure to attach the protective cover (accessory =). 9 96 Raise the display manually.
Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Green/Black Purple To rear right speaker Purple/Black If no connections are made, do not let the cable come out from the tab.
Connection/Installation ÑÑ3-way speaker system setup ÑÑConnecting the system and external components 15 14 13 12 11 Subwoofer Preout 10 Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
Connection/Installation 6 HDMI input Use HDMI cable KCA-HD100 (optional accessory). When you connect the cable to HDMI terminal, remove the fixture. After connecting the cable, put the fixture again. ÑÑConnecting a USB device Accessory 2 (1 m) [3] USB device [2] Fixture USB terminal [1] HDMI connector 7 iDatalink connector 8 Dashboard camera interface Connect a Dashboard Camera DRV-N520 (optional accessory). (P.101) 9 AV Audio input (ø3.
Connection/Installation ÑÑSecuring the USB extension cable ÑÑConnecting an Android smartphone Android smartphone [2] Secure the USB extension cable with insulating tape or the like so that its connectors are not disconnected. USB cable [2] Accessory 2 (1 m) [3] ÑÑConnecting an iPod/iPhone USB terminal [1] KCA-iP103 (0.8 m) [3] Lightning Digital AV Adapter [2] iPod/iPhone [2] KCA-HD100 (1.8 m) [3] KCA-iP103 (0.8 m) [3] Accessory 2 (1 m) [4] SB maximum power supply current : U DC 5 V = 1.
Connection/Installation ÑÑConnecting the camera Left side view camera and Right side view camera [2] F or HD video, an HD camera is also used as Rear view camera. [6] For HD video, an HD camera is also used as Front view camera.
Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. ÑÑAbout settings • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter.
Troubleshooting Error Messages When you fail to operate the unit correctly, the cause of the failure appears as the message on the screen. There is an error in the speaker wiring. Please check the connections. Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Wire or insulate the speaker cord as appropriate and turn the power off and on again.
Troubleshooting ÑÑApple CarPlay The GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Device List]. Check the connection of the GPS antenna or plug in over USB to use Apple CarPlay.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. ÑÑAbout files The following audio and video files are supported. ■■Playable Audio files Format AAC-LC (.m4a) MPEG-2/MPEG-4 AAC LC HE-AAC(V1,V2) MP3 (.mp3) MPEG-1/MPEG-2 Audio Layer 3 WMA (.wma) Windows Media Audio Standard L3 profile (Version 7,8,9) Linear PCM RIFF waveform Audio (WAVE) (.wav) Format FLAC (.flac) flac Vorbis (.ogg) vorbis DSD (.dsf, .
Appendix ■■Limitation on structure of file and folder USB device/SD Maximum number of folder layers Maximum number of files (per folder) Maximum number of folders (per folder) Maximum number of folders (per device) 8 999 9999 Unlimited • You can enter a folder name and file name with 255 or fewer single-byte characters. • Files in the folder whose folder name begins with a dot (.) cannot be played.
Appendix Specifications ■■Monitor section Picture Size : 10.1 inches (diagonal) wide : 223.7 mm (W) × 125.8 mm (H) 8-13/16 × 4-15/16 inch Display System : AAS LCD panel Drive System : TFT active matrix system Number of Pixels : 2,764,800 (1280H × 720V × RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED ■■USB interface section USB Standard : USB 2.0 High Speed File System : FAT 16, FAT 32, exFAT, NTFS Maximum Power Supply Current : DC 5 V 1.
Appendix ■■HDMI section ■■Digital FM tuner section HDMI : Type-A Frequency Range (step) : 87.9 MHz – 107.9 MHz (200 kHz) Input Resolution • VGA (640x480p @59.94Hz/60Hz) • 480p (720x480p @59.94Hz/60Hz) • 720p (1280x720p @59.94Hz/60Hz) Frequency Response (± 3.0 dB) : 20 Hz – 20 kHz Input Audio Type : 32K/44.1K/48K/88.2K/96K/176.2K/192K Hz 16 bit/20 bit/24 bit Linerar PCM ■■DSP section Graphics equalizer Band: 13 Band Frequency (BAND1 – 13) : 62.5/100/160/250/400/630/1k/1.6k/2.5k/4k/6.
Appendix ■■Audio section Maximum Power Output (Front & Rear) : 50 W × 4 Typical Power Output (Front & Rear) Full Bandwidth Power (at less than 1% THD) : 22 W × 4 Output frequency band : 20 – 88,000 Hz Preout Level (V) : 5 V/ 10 kΩ Preout Impedance : ≤ 300 Ω Speaker Impedance :4–8Ω ■■Navigation section Receiver : High-sensitivity GNSS receiver Reception Frequency GPS: 1575.42 MHz (C/A code) GLONASS: 1598.0625 - 1605.
Appendix About this Unit ÑÑImportant Notice on Software ■■Software License on This Product The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties.
Appendix Article 4 (Rights to Licensed Software) All rights to Licensed Software and the associated literature, including copyrights, shall reside with Licensor or the original right holder who has granted the Right of Use and right to sublicense to Licensor (hereinafter referred to as “Original Right Holder”), and User does not have any rights other than Right of Use granted hereunder with regard to Licensed Software and the associated literature. Article 5 (Exemption Granted to Licensor) 1.
Appendix ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • DSD, LDAC and LDAC logo are trademarks of Sony Corporation. • Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
Appendix • THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
Appendix ■■FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix ■■Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) ■■Informação sobre a eliminação de pilhas Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
DNR1007XR GPS NAVIGATION SYSTEM INSTRUCTION MANUAL © 2020 JVCKENWOOD Corporation IM403_Nav_K_En_00
© 2020 JVCKENWOOD Corporation All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
No Warranty. The Navigation Provider Products are provided to you "as is," and you agree to use them at your own risk.
Data, as further set forth at https://legal.here.com/en-gb/terms /general-content-supplier-terms-and-notices. Term. This Agreement is effective until such time as (i) if applicable, your subscription term is either terminated (by you or by the Navigation Provider) or expires, or (ii) Navigation Provider terminates this Agreement for any reason, including, but not limited to, if the Navigation Provider finds that you have violated any of the terms of this Agreement.
Table of Contents Getting Started................................ 1 Navigation System ................................... 1 Status Bar Icons ...................................... 1 Using the On-Screen Buttons .................. 1 Removing a Shortcut ............................... 1 Adding a Shortcut .................................... 1 Using Multi-touch Controls ...................... 1 Updating the Software ............................. 1 Updating Map Data ..................................
Editing a Saved Trip ......................... 10 Saving Trip Logs ............................... 10 Viewing Previous Routes and Destinations ........................................... 10 Viewing the Weather Forecast .............. 10 Viewing Weather Near a Different City .................................................... 11 Viewing Road Weather .......................... 11 Finding Fuel Stations and Prices ........... 11 Dynamic Parking ................................... 11 About Traffic.............
Getting Started WARNING See the Safety Precautions and Important Information in the KENWOOD system instruction manual for product warnings and other important information. NOTE: The screenshots shown in this manual may not exactly match the screens on your navigation system. The images used in this manual are intended for reference only. Removing a Shortcut 1 Select Where To? > > Remove Shortcut(s). 2 Select a shortcut to remove. 3 Select the shortcut again to confirm. 4 Select Save.
Finding Locations About Locations The detailed maps loaded in your device contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category 1 Select Where To?. 2 Select a category, or select Categories. 3 If necessary, select a subcategory. 4 Select a location. Searching Within a Category To narrow your search results, you can search within some categories. 1 Select Where To?.
Finding an Intersection You can search for an intersection or junction between two streets, highways, or other roads. 1 Select Where To? > Categories > Intersections. 2 Follow the on-screen instructions to enter street information. Select the intersection. 3 Finding a City 1 Select Where To? > Categories > Cities. 2 Select an option: • Select a city from the list of nearby cities. • To search near another location, select Searching near: (Changing the Search Area).
Clearing the List of Recently Found Places Select Where To? > Recent > Clear > Yes. > Finding Parking 1 Select Where To? > Categories > Parking. 2 Select a parking location. Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location. 1 Select Settings > Navigation > GPS Simulator. 2 From the main menu, select View Map. 3 Tap the map twice to select an area. The address of the location appears at the bottom of the screen.
4 Select a route. 5 Select Go!. Your Route on the Map NOTICE The speed limit feature is for information only and does not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVCKENWOOD will not be responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs. The route is marked with a magenta line. A checkered flag marks your destination.
4 Select the ending point of the road Lodging section, and select Next. Select Done. 5 Restrooms Finding Exit Services 1 From the map, select > Exit Services. 2 Use the arrows to select an upcoming exit. 3 Select an exit service tab. 4 Select a point of interest. Navigating to an Exit 1 From the map, select > . 2 Select Go!. > Exit Services Avoiding Road Features 1 Select Settings > Navigation > Avoidances. 2 Select the road features to avoid on your routes, and select Save.
Installing POI Loader Application You can create or download custom POI lists on your computer and prepare them for installation using the POI Loader application. You must use a USB mass storage device to load POIs. 1 Go to www.garmin.com/poiloader. 2 Click POI Loader. 3 Download and install the POI Loader application onto your computer. Installing Custom Points of Interest Before you can install custom points of interest, you must prepare POI lists for installation using the POI Loader application.
2 Select an option: • Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top. • Select North Up to display the map in 2-D with north at the top. • Select 3-D to display the map in three dimensions. 3 Select Save. Viewing Route Activity Viewing a List of Turns While navigating a route, you can view all of the turns and maneuvers for your entire route and the distance between turns. 1 While navigating a route, select the text bar on the top of the map.
Using the Apps Searching Help Topics Select Apps > Help > . About ecoRoute The ecoRoute™ feature calculates the fuel economy and the fuel price of navigating to a destination, and offers tools for improving fuel efficiency. The data provided by the ecoRoute feature is an estimate only. To receive more-accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy (Calibrating the Fuel Economy).
3 Select Export to export and save a report to the USB mass storage device. Resetting ecoRoute Information 1 Select Apps > ecoRoute™ > Vehicle Profile. 2 Select Reset. 3 Select Yes. Planning a Trip You can use the trip planner to create and save a trip with multiple destinations. 1 Select Apps > Trip Planner. 2 Select New Trip. 3 Select Select Start Location. 4 Search for a location (Finding a Location by Category). 5 Select Select. 6 To add additional locations, select . 7 Search for a location.
The detailed forecast for that day appears. About Traffic Viewing Weather Near a Different City 1 Select Apps > Weather > Current NOTICE Garmin and JVCKENWOOD are not responsible for the accuracy or timeliness of traffic information. Location. 2 Select an option: • To view weather for a favorite city, select a city in the list. • To add a favorite city, select Add City, and enter a city name.
A list of traffic events appears, organized by their location on the route. Select an event. 3 Manually Avoiding Traffic on Your Route 1 From the map, select . 2 Select Traffic On Route. 3 If necessary, use the arrows to view other traffic delays on your route. 4 Select > Avoid. Taking an Alternate Route 1 While navigating an automobile route, select . 2 Select Alternate Route. 3 Select a route. Viewing Traffic on the Map The traffic map shows color-coded traffic flow and delays on nearby roads.
Custom Avoidances: Allows you to avoid specific roads or areas. Advanced Detours: Sets the length of a detour. Safe Mode: Disables all functions that require significant operator attention and could become a distraction while driving. Voice Prompts: Enables voice prompts. GPS Simulator: Stops the device from receiving GNSS signals. Changing the Route Calculation Mode 1 Select Settings > Navigation > Calculation Mode.
Travel History: Allows the device to record information for the myTrends (Using Suggested Routes), Where I’ve Been (Viewing Previous Routes and Destinations), and Trip Log (Viewing the Trip Log) features. Clear Travel History: Clears your travel history from the navigation system. Update Maps: Exports data from the navigation unit for updates (Updating Map Data). Proximity Alerts Settings NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display.
To download free navigation software updates and purchase updated maps for your product, go to www.garmin.com/kenwood.
DNR1007XR GPS NAVIGATION SYSTEM Quick Start Guide SYSTÈME DE NAVIGATION GPS Guide de démarrage rapide SISTEMA DE NAVEGACIÓN GPS Guía de inicio rápido • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . • The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference.
Important Notice on Software ÑÑSoftware License on This Product The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties.
Article 3 (Terms of License) 1. I n assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement. 2.
Important Notice on Software.............................. 2 EULA............................................................................... 2 Contents................................................. 4 Before Use Contents Before Use.............................................. 4 About the Quick start guide.................................. 4 How to read this manual......................................... 4 Precautions..................................................................
Before Use • You can select a language to display menus, audio file tags, etc. See System Setup (P.72) in the Instruction Manual. • The Radio Broadcast Data System feature won’t work in areas where the service is not supported by any broadcasting station. ÑÑProtecting the monitor • To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with a sharp tip.
Before Use # CAUTION Failure to avoid the following potentially hazardous situations may result in injury or property damage. The navigation system is designed to provide you with route suggestions. It does not reflect road closures or road conditions, weather conditions, or other factors that may affect safety or timing while driving. Use the navigation system only as a navigational aid.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel 8 1 Number 2 3 4 5 Name 6 7 Motion 1 Remote Sensor • Receives the remote control signal. 2 HOME/[ ] • Displays the HOME screen (P.11). • Pressing for 1 second turns the power off. • When the power is off, turns the power on. 3 NAV/ CAMERA • Displays the navigation screen.
Basic Operations Number Name 8 SD card slot Motion • A slot to insert an SD card. • You can play audio/visual files in the card. *1 • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. *2 *1 If the map update file remains in the SD card, you cannot play audio/visual files. *2 The system of the unit is rebooted after inserting/removing the MAP SD. Turning on the Unit 1 Press the [HOME]/[ ] button.
Basic Operations Initial Settings ■■ [OEM SETUP] This function requires a commercial adaptor. Consult your KENWOOD dealer for details. Initial SETUP Perform this setup when you use this unit first time. 1 Set each item as follows. ■■ [DEMO] Set the demonstration mode. Default is “ON”. 2 Touch [Finish]. NOTE • These settings can be made from the SETUP menu. See Setup (P.68) in the Instruction Manual. ■■ [Locale] Select the country for the navigation system.
Basic Operations Calendar/clock settings 1 Press the [HOME]/[ ] button. 2 Touch [ ]. 3 Touch [SETUP]. hh SETUP Menu screen appears. 4 Touch [System]. hh System setting menu appears. 5 Set each item as follows. Scroll the page to show hidden items. ■■ [Time Format] Select the time display format. [12-Hour] (Default)/[24-Hour] ■■ [Clock] [NAV-SYNC] (Default): Synchronizes the clock time with navigation GPS data. [Manual]: Set the clock manually.
Basic Operations HOME screen descriptions Most functions can be performed from the HOME screen. Display the HOME screen 1 Press the [HOME]/[ ] button. 1 hh HOME screen appears. 2 Widget 3 4 1 • Widget 2 • Displays the source selection screen. (P.12) 3 • Displays the SETUP Menu screen. 4 • Short-cut playback source icons (P.13) 1 Press the [HOME]/[ ] button. hh HOME screen appears. 2 You can change the widget or customize the widget area.
Basic Operations Popup menu 1 Press the [MENU]/[ATT] button. hh Popup menu appears. 2 Touch to display the popup menu. Source selection screen description You can display icons of all playback sources and options on the source selection screen. 1 2 1 The contents of the menu are as follows. 3 • Displays the Screen Adjustment screen. 1 • Changes playback sources. For playback sources, see Select the playback source (P.12). 2 • Changes pages. (Touch [ ]/[ ].
Basic Operations • Switches to the Wireless Mirroring screen from the connected Android smartphone. Put the unit in standby 1 Press the [HOME]/[ ] button. hh HOME screen appears. • Switches to the SiriusXM® satellite radio broadcast. 2 Touch [ • Plays a Bluetooth audio player. 3 Touch [STANDBY]. • Switches to the HD Radio broadcast. (P.19) ]. • Plays an iPod/iPhone. (P.18) • Plays files on a USB device. (P.17) • Plays files on an SD card. (P.
Basic Operations Source control screen descriptions List screen There are some common function keys in the list screens of most sources. There are some functions which can be performed from most screens. 5 Display the list screen 4 1 Touch [1]. hh The list screen appears. 4 1 2 3 1 2 Displays the source selection screen. (P.12) 2 Displays the SETUP Menu screen. 3 Short-cut source icons The source changes to the one you have set with a short-cut.
Basic Operations Navigation Operation NOTE • You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help]. For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the [NAV]/[CAMERA] button. • For more information about your navigation system, download the latest version of the Owner’s Manual from https://manual. kenwood.
Basic Operations 1 ■■Viewing the traffic map 2 4 5 3 6 7 The traffic map shows color-coded traffic flow and delays on nearby. 1 From the map, touch [ ]. 2 Touch [Traffic Conditions]. 8 9 1 Views the Next Turn page or the junction view page, when available. 2 Views the Turn List page. 3 Views the Where Am I? page. 4 Stops the currents route. 5 Displays traffic information on the route. 6 Returns to the Main menu. 7 Data field. Touch to display a different data field. 8 Vehicle speed.
USB/SD/iPod USB/SD/iPod Connecting a USB device Inserting the SD 1 Connect the USB device with the USB cable. (P.35) 1 Tilt the panel toward you manually. 2 3 4 Press the [HOME]/[ ] button. 2 Insert the SD card into the slot until it clicks. 3 4 5 6 Close the panel. Touch [ ]. Touch [USB]. (P.12) ÑÑDisconnect the USB device 1 Press the [HOME]/[ ] button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device You can use a mass-storage-class USB device with this unit.
USB/SD/iPod Connect iPod/iPhone Preparation • With an iPhone compatible with Apple CarPlay, turn off Apple CarPlay by operating the iPhone at functional setup before connecting iPhone. For details of the setup method, contact the manufacturer of the terminal. • Only one iPod/iPhone can be connected. Wired connection Preparation USB/SD/iPod Basic Operation 1 2 3 Press the [HOME]/[ ] button. Touch [ ]. Touch [USB], [SD], or [iPod]. (P.
HD Radio™ Tuner HD Radio™ Tuner HD Radio Tuner Basic Operation • [ ] : Stores the information about the song being received. • [Emergency Alerts] : Turn on or off the alert message. • [Alert Message Log] : Displays the alert message received. To listen to the HD Radio source, touch [HD Radio] icon on the source selection screen. (P.12) NOTE 3 Seek mode/Band keys • HD Radio broadcasting is for North American sales area only.
HD Radio™ Tuner Memory Operation ÑÑAuto memory You can store stations with good reception in the memory automatically. 1 2 Touch desired band key. 3 Touch [Yes]. hh Auto memory starts. Touch [ ] on the right side of the screen. Touch [AME]. ÑÑManual memory You can store the currently being received station or channel in the memory. 1 Select the station or channel you wish to store in the memory.
Bluetooth Control Bluetooth Control Register the Bluetooth device It is necessary to register the Bluetooth audio player or smartphone/cell-phone in this unit before using the Bluetooth function. 1 2 3 Press the [HOME]/[ ] button. 4 5 6 Touch [Connections & AV]. 9 Operate your smartphone/cell-phone according to the displayed messages. ●● Confirm the request both on the smartphone/cell-phone. Touch [ ]. Touch [SETUP]. hh SETUP Menu screen appears. Touch [Device List]. Select a device type.
Bluetooth Control Using the Hands-Free Unit You can use the telephone function by connecting the Bluetooth telephone to this unit. NOTE • While Apple CarPlay or Android Auto is connected, the Bluetooth Hands-Free function and two Bluetooth devices connections cannot be used. Only the Apple CarPlay or Android Auto Hands-Free function can be used. ÑÑMake a call 1 Press the [HOME]/[ 2 3 Touch [ ] button. ]. Touch [TEL]. hh Hands-Free screen appears.
Bluetooth Control NOTE To end call • You can sort the phone numbers in the list by last name or first name. For details, see Hands-Free Setup (P.62) in the Instruction Manual. • When Russian or Hebrew is selected in "Language select", you can switch between English keyboard and the selected language keyboard. For details, see System Setup (P.72) in the Instruction Manual. • You can search with 3 initial letters on the English keyboard and 1 initial letter on the Russian / Hebrew keyboard.
Controlling Audio Controlling Audio You can adjust various settings such as audio balance or subwoofer level. 1 2 3 Press the [HOME]/[ ] button. Touch [ ]. Touch [Audio]. ÑÑControlling General Audio 1 Touch [FAD / BAL / Zone]. 2 Set each parameter as follows. ÑÑEqualizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 2 Touch [EQ / SW Level]. Touch the screen and set the Graphic Equalizer as desired.
Connection/Installation Connection/Installation This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Before Installation Before installation of this unit, please note the following precautions. # WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.
Connection/Installation ÑÑSupplied accessories for installation 1 Cooling fan • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth/Wi-Fi antenna.
Connection/Installation = x1 ~ (Ø3 x 6 mm) (Black) x2 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Remove the vehicle parts for installing the unit and connecting wires to terminal. 3) Make the proper input and output wire connections for each unit. 4) Connect the speaker wires of the wiring harness. 5) Connect wiring harness wires in the following order; ground, battery, ignition.
Connection/Installation Installing the unit ÑÑConfirm the installing position of the display unit ●● Vehicles cannot be installed It may be possible to install if it can avoid the following by adjustment for slider position and display height. Lever operations are interfered such as shift lever, wiper lever, winker lever when install the unit. A hazard switch is hidden from a driver seat. The display unit hits a panel on the vehicle.
Connection/Installation ÑÑPositioning the slider in 4 forward 1 Remove the four screws from the bottom of the main unit. Install the bracket for forward position (accessory 0) each side so that its projections are aligned with the slots on the main unit. 0 Screw Projection Projection 5 Main unit 2 Remove the two cover for back position, and then remove the two hexagon head screws from the bracket for back position.
Connection/Installation ÑÑAdjusting the display height 1 Remove the four flat head screws from both sides. Flat head screw 2 ÑÑGPS antenna GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface. 2) Remove the separator of the metal plate (accessory 7).
Connection/Installation ÑÑMicrophone unit 1) Check the installation position of the microphone (accessory 3). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 3), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 3) to the driver. 4 5 Reinstall the removed parts such as a panel on the vehicle.
Connection/Installation 8 Attach the protective cover (accessory =) to coupling part, and then fix it with two binding head screws (accessory ~). ~ = NOTE • If the protective cover (accessory =) is not attached, this unit will not turn on. Even if the unit is turned on, the power may be turned off halfway. Be sure to attach the protective cover (accessory =). 9 Raise the display manually. 32 !B5K-0760-00_20DNX_K_FP_QSG.
Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Green/Black Purple To rear right speaker Purple/Black If no connections are made, do not let the cable come out from the tab.
Connection/Installation ÑÑ3-way speaker system setup ÑÑConnecting the system and external components 15 14 13 12 11 Subwoofer Preout 10 Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
Connection/Installation 6 HDMI input Use HDMI cable KCA-HD100 (optional accessory). When you connect the cable to HDMI terminal, remove the fixture. After connecting the cable, put the fixture again. ÑÑConnecting a USB device Accessory 2 (1 m) [3] USB device [2] Fixture USB terminal [1] HDMI connector 7 iDatalink connector 8 Dashboard camera interface Connect a Dashboard Camera DRV-N520 (optional accessory). (P.36) 9 AV Audio input (ø3.
Connection/Installation ÑÑConnecting an iPod/iPhone Lightning Digital AV Adapter [2] KCA-iP103 (0.8 m) [3] iPod/iPhone [2] KCA-HD100 (1.8 m) [3] ÑÑConnecting the camera Left side view camera and Right side view camera [2] Front view camera [4] [6] [3] Video input (Yellow) KCA-iP103 (0.
Appendix ÑÑTo set up the camera Appendix assignment settings 1 2 3 Press the [HOME]/[ ] button. 4 Touch [Camera]. hh Camera setting menu appears. RF Output Power (E.I.R.P.) : +4 dBm (MAX), Power Class 2 5 6 Touch [Camera Assignment Settings]. ■■General Select the item to set up. Operating Voltage : 12 V DC car battery Note for specifications Touch [ ]. Touch [SETUP]. hh SETUP Menu screen appears.
Appendix ■■Copyrights • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • DSD, LDAC and LDAC logo are trademarks of Sony Corporation. • Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society.
Appendix COMMERCIAL USE OF A CONSUMER TO ( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTPS://WWW.MPEGLA.
Hi-Res Audio logo and Hi-Res Audio Wireless logo are used under license from Japan Audio Society. !B5K-0760-00_20DNX_K_FP_QSG.
MILITARY Units purchased through the U.S.A. military exchange service overseas may be serviced under warranty in the continental U.S.A., subject to the tollowing conditions. 1) The original warranty is in etfect. LIMITATION OF IMPLIED WARRANTIES 2) Proo! of purchase is provided to the servicer. Any and all implied warranties, including warranties of merchantability and fitness !or a particular purpose, shall be limiled in duration to the length ol this warranty.
U.S.A. JVCKENWOOD USA Corporation This warranty will be honored only in the U.S.A. WHO IS PROTECTED EXCLUSION OF DAMAGES KENWOOD WARRANTY This warranty is enforceable only by the original purchaser. KENWOOO'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITEDTO THE REPAIR OR REPLACEMENTOFTHE PRODUCT AT OUR OPTION. KENWOOD SHALL NOT BE LIABLE FOR: 1.
