MONITOR WITH DVD RECEIVER ENGLISH INSTRUCTION MANUAL DDX4019DAB DDX4019BT DDX4019BTR (Region 2 – DVD Region Code 2 Area) (Region 2 – DVD Region Code 2 Area) (Region 5 – DVD Region Code 5 Area) This instruction manual is used to describe models listed above. Model availability and features (functions) may differ depending on the country and sales area. © 2018 JVC KENWOOD Corporation 00_DDX4019BT_ENQN_ENG.
Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags.
Important Notice Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossedout wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.
Important Notice Italiano Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “DDX4019DAB/DDX4019BT/ DDX4019BTR” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/ Český Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “DDX4019DAB/DDX4019BT/DDX4019BTR” splňuje podmínky směrnice 2014/53/EU.
Important Notice Eesti Käesolevaga JVCKENWOOD kinnitab, et „DDX4019DAB/ DDX4019BT/DDX4019BTR“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/ HRVATSKI / SRPSKI JEZIK JVCKENWOOD ovim izjavljuje da je radio oprema “DDX4019DAB/DDX4019BT/DDX4019BTR” u skladu s Direktivom 2014/53/EU.
About this manual The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. Illustrations of DDX4019BT are mainly used for explanation. This manual mainly explains operations using the buttons on the monitor panel and keys on the touch panel. For operations using the remote controller, see page 38.
Component Names and Operations 8 Volume/ATT knob • Volume (Turn): Adjusts the audio volume. • ATT (Press): Attenuates the sound. 9 CAM button • (Press): Displays the picture from the connected rear view camera. Basic Operations How to reset your unit If the unit fails to operate properly, press the reset button. Turning on the power 1 Reset button • Resets the unit. 2 Loading slot 3 Screen (touch panel) 4 Monitor panel HOME button 5 • (Press): Turns on the power. • (Hold): Turns off the power.
Getting Started Basic Operations 2 Put the unit in standby. On the source/option selection screen, touch as follows: 2 On the pop-up short-cut menu, touch as follows: Initial settings When you power on the unit for the first time or reset the unit, the screen appears. Perform the initial settings. To turn on the screen: Touch the screen.
Getting Started Select the text language used for on-screen information. • English/Español/Français/Deutsch/Italiano/ Nederlands/Ελληνικά/Português/Türkçe/Čeština/ Polski/Magyar/Руccĸий/ / / / / / /Bahasa Malaysia/ Bahasa Indonesia/ – For external monitors, only English/Spanish/ French/German/Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English.
Getting Started 3 Set the clock time. Various Screens and Operations You can display or change to other screens at any time to show information, change the AV source, change the settings, etc. Available playback sources and options Touch 1 to display the source/option selection screen. Home screen Radio • You can customize the Home screen. (Page 34) • To display the Home screen from other screens, press HOME. E.g. Source/option selection screen for DDX4019BT E.g.
Various Screens and Operations To change the page: Touch [ ]/[ ]. Current page is shown by the page indication on the top of the screen. To return to the Home screen: Touch [ source/option selection screen. ] on the Source control screen You can perform the playback operation from the source control screen during playback. • The operation keys and information displayed vary depending on the selected source/disc type/file type being played.
Various Screens and Operations Using the pop-up short-cut menu While displaying the source control screen, you can jump to another screen by touching the operation keys on the pop-up short-cut menu. 1 Display the pop-up short-cut menu. 2 Select an item to jump to by touching as follows. [Eject] Ejects the disc from loading slot. [Screen Adjustment] Displays the picture adjustment screen. [Display OFF] Turns off the screen. [Camera] Displays the picture from the connected rear view camera.
Disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types, file types and other information, see pages 45 and 46. • If “ ” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ ”, operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
Video Disc 2 Make the settings.
Video Video menu control operations You can display the video menu control during video playback. • Available operation keys differ depending on the selected disc type and file type. Touching the operation keys performs the following actions: Displays the picture adjustment screen. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. 2 Touch [+]/[–] to adjust the other items. • : Adjusts the brightness (−15 to +15). • : Adjusts the contrast (−10 to +10).
USB Video 2 [ MENU] [T MENU] Displays the disc menu (DVD). Displays the disc menu (DVD). [Highlight] Switches to the direct disc menu mode. Touch the target item to select. [CUR] Displays the menu/scene selection screen. • [J] [K] [H] [I]: Selects an item. • [Enter]: Confirms the selection. • [Return]: Returns to the previous screen. Video playback for VCD Touching the operation keys performs the following actions: 1 [ZOOM] [Aspect] [Picture Adjust] Refer to “Video playback except VCD” on page 11.
USB Selecting a folder/track on the list Playback operations Playback information and key operation • For playback information, see “Source control screen” on page 7. • For key operations on the touch panel, see “Common operation keys on source control screen” on page 7. 1 2 Enter the alphabet to search. Touch the first letter you want to search for, then touch [OK]. Display the folder/track list.
Android Connecting an Android device This unit supports Android OS 4.1 and above. Android (commercially available) iPod/iPhone Playback operations Connecting an iPod/iPhone Playback information and key operation Android HANDMODE • For playable iPod/iPhone types and other information, see page 48. • You cannot watch video. Wired connection S IW T iPod/iPhone iPod/iPhone 30-pin Lightning model connector model (commercially available) (commercially available) USB cable (commercially available) E.g.
Radio iPod/iPhone Bluetooth connection Pair the iPod/iPhone with this unit via Bluetooth. (Page 24) 2 Select a category (1), then select a desired item (2). The unit switches to FM alarm scene automatically when receiving an alarm signal from FM broadcast. Selecting the playback device via the connection method Playback information on the source control screen See on page 36 for more information. Select an item in each layer until you reach and select the desired file.
Radio 7 8 9 p q w e r t NEWS indicator AF indicator TI indicator Operation keys* ST/MONO indicator The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. Seek mode indicator LO.S indicator RDS indicator EON indicator The EON indicator lights up when a Radio Data System station is sending EON signals. [TI]*1 * See the following “Operation keys on source control screen”.
Radio Presetting stations in the memory You can preset five stations for each band. Selecting a preset station 1 Automatic presetting — AME (Auto Memory) 2 Make the settings. Select the band, then display the preset station window. On the source control screen, touch as follows: On the source control screen, touch as follows: 2 (Hold) Select a preset station. The local stations with the strong signals are found and stored automatically.
Radio * • 00min to 90min: Activates News Standby Reception by selecting the period of time to disable the interruption. The NEWS indicator lights up. • OFF (Initial): Deactivates the function. • ON: Tunes in only to FM stations with sufficient signal strength. The LO.S indicator lights up. • OFF (Initial): Deactivates the function.
Digital Radio (DAB) Operation keys on source control screen • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 7. [TI] (For RDS features) Activates TI standby reception mode. • When TI is activated, the unit is ready to switch to traffic information if available. The TI indicator lights up in white.
Digital Radio (DAB) Presetting services in the memory You can preset five services for each band. 1 Selecting a preset service Settings for Digital Radio 1 1 Tune in to a service you want to preset. Select the band, then display the preset service window. Display the screen. On the source control screen, touch as follows: On the source control screen, touch as follows: 2 2 Select a preset number to store into. 2 Make the settings. Select a preset service.
Digital Radio (DAB) *1 If the service of the announcement item you activated begins with the ensemble being received, this unit switches from any source to the announcement received.*2 • News flash/Transport flash/Warning/Service/ Area weather flash/Event announcement/ Special event/Programme information/Sport report/Financial report – Set [ON] for the annoucement items you need. – Select [All OFF] to deactivate all the announcements.
Spotify Playback operations Playback information and key operation Operation keys on source control screen • The appearance of the operation keys may differ, however the similar operation keys have the same operations. • See also “Common operation keys on source control screen” on page 7. Touching the operation keys performs the following actions: 1 [ ]*1 [ You can also operate Spotify with an optionally purchased remote controller, KNA-RCDV331.
Spotify Selecting a track 1 Other External Components AV-IN Display the Spotify menu screen. On the source control screen, touch as follows: Connecting an external component See page 45 for more information. Starting playback 2 Select the list type, then select a desired item. • The list types displayed differ depending on the information sent from Spotify. 1 2 Select “AV-IN” as the source. Turn on the connected component and start playing the source.
Other External Components Operations while the camera screen is displayed To adjust the picture Touch the area shown below. Video menu control is shown. For details, see “Video menu control operations” on page 11. • To exit video menu control, touch the same area again. To display parking guidelines Set to [ON] (Page 35) or touch the area shown below. • To close the parking guidelines, touch the same area again.
Bluetooth® Auto pairing When is set to [ON] (Page 29), iOS devices (such as iPhone) are automatically paired when connected via USB. Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Search for the unit (“DDX4DAB”/“DDX4”) from your Bluetooth device. 2 Confirm the request both on the device and the unit. Then, on the screen, touch as follows: [System] : [Enter] Note • The PIN code is initially set to “0000”.
Bluetooth® 2 Select the device (1) you want to connect, then touch [Connection] (2). • The status is shown as follows: : Connection is in progress. : A connection has been established. : A connection is ready to be established. : Disconnection is in progress. : No connection is established. • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device.
Bluetooth® Making a call 1 Display the phone control screen. On the Home screen, touch as follows: 2 Select a method to make a call. 1 From the call history* (missed calls/received calls/dialed calls) 2 From the phone book* 3 From the preset list (Page 28) 4 Use direct number entry 5 Use voice dialling To use alphabet search in the phone book 1 Touch [ A-Z ]. 2 Touch the first letter you want to search for on the keypad. To search for a number, touch [1,2,3...].
Bluetooth® Presetting phone numbers Bluetooth audio player You can preset up to five phone numbers. 1 2 Display the phone control screen. KENWOOD Music Mix On the Home screen, touch as follows: When “BT Audio” is selected as the source, you can connect up to five Bluetooth audio devices at the same time. You can easily switch between these five devices by playing music from the device. Select call history or phone book calling method (1), then select a contact (2) to preset.
Bluetooth® Selecting an audio file from the menu 1 Display the audio menu. On the source control screen, touch as follows: Bluetooth settings You can change various settings for using Bluetooth devices on the screen. 1 Display the screen. On the Home screen, touch as follows: 2 Select a category (1), then select a desired item (2).
Settings Audio settings Display the
Settings Adjust the sound effect. Adjusts loudness. • OFF (Initial)/Low/High Selects the bass boost level. • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/Level 5 Reduces the driving noise by raising the bandwidth. • OFF (Initial)/ON *1 Virtually enhances the sound space using the Digital Signal Processor (DSP) system. Select the enhance level.
Settings Setting the speakers and crossover frequency 1 Select a car type (1), select the location of the speakers (2), then display the screen (3). 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter.
Settings Determining the value for adjustment If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determines the center of the currently set listening position as the reference point. 2 Measures the distances from the reference point to the speakers. 3 Calculates the differences between the distance of the furthest speaker and other speakers.
Settings : Change the illumination color of the buttons on the monitor panel 3 Adjust the image (1), then capture the image (2). • ON (Initial): Activates the display demonstration. • OFF: Deactivates the display demonstration. • ON (Initial): Scrolls the displayed information repeatedly. • Once: Scrolls the displayed information once. • OFF: Cancels. • You can also adjust the illumination color yourself.
Settings Adjust the brightness and blackness of the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings: Adjusts brightness. • –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer off) Input settings Display the screen. On the Home screen, touch as follows: Adjust the parking guidelines according to the size of the car, parking space and so on.
Settings System settings Display the screen. On the Home screen, touch as follows: If [Android/Other] is selected in step 1: Specify the connection method of Android/iPod/ iPhone. 1 Select the device type (1), then touch [Change] (2). Then, on the screen, touch [System]. The screen appears. Go to step 3. 3 2 E.g. System settings screen for DDX4019BT Select the connection method (1), then confirm the selection ([OK] or [Next]) (2).
Settings This setting is available only when 2-way speaker system is selected. (Page 31) This unit has its own Registration Code. Once you have played back a file with the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. • Touch [Enter] to display the information. • To return to the previous screen, touch [OK]. Assign functions to the keys of the remote controller on the steering wheel.
Remote Controller Settings • The unit can register/change all of the buttons’ functions at the same time. To do this, press all buttons in turn and after pressing all of them, touch [Done] on the screen. However, new functions cannot be learned after this operation. • When changing the functions already learned, touch the assigned function you want to change in step 3 and then touch to select the new function from the function list.
Remote Controller Preparation Battery installation Use two “AAA”/“R03”-size batteries. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. • Always insert batteries from – poles to avoid bending the springs. • If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace both batteries with new ones.
Remote Controller DVD/VCD (DVD mode) J/K/H/I Moves the cursor when displaying a menu. H/S / T/I Selects a track. J/FM+ / K/AM− Selects a folder. POSITION/IW Starts/pauses playback. MENU/o Stops and memorizes the point where the disc stops. 0–9 • Specifies the number to search for in direct search. • 1/2: Fast forwards/backwards. • 4/5: Slow forwards/backwards. (For DVD only) – Slow forward/backward speed changes each time you press this key.
Remote Controller 1 Press # BS/DIRECT to enter the search mode. • Each time you press # BS/DIRECT, the item to search for changes. 2 Press a number button to select a desired item (station frequency/chapter/title/ folder/file/track). • To erase a misentry, press * +/CLEAR. 3 Confirm the selection. • For station frequency: Press H/S / T/I. • For others: Press ENTER. To exit the search mode: Press # BS/DIRECT.
Installation and Connection • If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. • If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one with the same rating.
Installation and Connection Installing the unit 3 Removing the unit 1 Engage the catch pins on the extraction keys (]) and remove the two locks on the lower part of the trim plate ([). Remove the unit by inserting the two extraction keys (]), then pulling them as illustrated. Catch Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Installing the trim plate 2 Remove from the upper two catches of the trim plate ([).
Installation and Connection Wiring connection *1 Only for DDX4019BT/ DDX4019BTR: Connect the aerial cord. *2 Only for DDX4019DAB: Connect the DAB aerial (separately purchased). *3 Only for DDX4019DAB. *4 If no connections are made, do not let the cable come out from the tab. *5 For 3-way speaker system connection, see also page 45.
References Installation and Connection Connecting external components 6 Output terminals* • Left output (White) • Right output (Red) REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover: REAR: Tweeter preouts FRONT: Mid range speaker preouts SW: Woofer preouts 1 Steering wheel remote controller input (REMO-IN) • Connect to the car’s steering remote harness. Contact your KENWOOD dealer for details.
References • This unit can play back files that meet the conditions below: – Bit rate: MP3: 8 kbps – 320 kbps WMA: For disc: 5 kbps – 320 kbps For USB : 32 kbps – 192 kbps AAC: 16 kbps – 320 kbps – Sampling frequency: MP3: 16 kHz – 48 kHz WMA: 8 kHz – 48 kHz WAV: 44.1 kHz AAC: 32 kHz – 48 kHz FLAC: 8 kHz – 96 kHz – Files recorded in VBR (variable bit rate), and have a discrepancy in elapsed time indication • This unit can show or display the following: – Tag: MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.
References – This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder) in a recordable/rewritable disc. – Use only “finalized” recordable/rewritable discs. – This unit can play back multi-session recordable/ rewritable discs; however, unclosed sessions will be skipped while playing. Unplayable disc types and formats • DVD-Audio/DVD-ROM discs • SVCD (Super Video CD), CD-ROM, CD-I (CD-I Ready), DTS-CD • MPEG4/AAC (.
References About USB playback Important Make sure all important data has been backed up to avoid losing the data. We bear no responsibility for any loss of data stored in the devices while using this unit. Playable files on a USB device • This unit can play the following types of files stored in a USB mass storage class device. – JPEG/DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC (.aac/.
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with external components, refer also to the instructions supplied with the adapters used for connection (as well as the instructions supplied with the external components). General No sound comes out of the speakers. Adjust the volume to the optimum level. Check the cords and connections. No picture is displayed on the screen. Turn on the screen.
Troubleshooting Android Sound cannot be heard during playback. Reconnect the Android device. Launch any media player application on the Android device and start playback. Sound output only from the Android device. Use another media player application. Restart the Android device. If this does not solve the problem, the connected Android device is unable to route the audio signal to unit.
Specifications Troubleshooting The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The Bluetooth device does not detect the unit. Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. For devices compatible with Bluetooth 2.1: Register the device using a PIN code. (Page 25) For devices compatible with Bluetooth 2.
Specifications DVD player section Bluetooth section D/A Converter 24 bit Technology Bluetooth V3.0 Audio Decoder Linear PCM/Dolby Audio/ MP3/WMA/WAV/AAC (.m4a) Frequency 2.402 GHz to 2.480 GHz MPEG1/MPEG2/DivX/JPEG RF Output Power (E.I.R.P.) +4 dBm (MAX), Power Class 2 Video Decoder Wow & Flutter Below Measurable Limit Frequency Response 96 kHz Sampling: 20 Hz to 22 000 Hz 48 kHz Sampling: 20 Hz to 22 000 Hz 44.
Specifications 3 Way X'Over Tweeter (HPF): Mid Range (HPF): Mid Range (LPF): Subwoofer (LPF): MW tuner section Position Frequency (Hz): 1k/1.6k/2.5k/4k/5k/6.3k/8k/ 10k/12.5k Slope (dB/Oct.): −6/−12 Phase: Normal/Reverse Gain (dB): –8/–7/–6/–5/–4/–3/–2/–1/0 Frequency (Hz): Through/30/40/50/60/70/ 80/90/100/120/150/180/ 220/250 Slope (dB/Oct.): −6/−12 Frequency (Hz): 1k/1.6k/2.5k/4k/5k/6.3k/8k/ 10k/12.5k/Through Slope (dB/Oct.
Specifications Audio section Trademarks and licenses Maximum Power (Front & Rear) 50 W × 4 Full Bandwidth Power (Front & Rear) 22 W × 4 (at less than 1% THD) Preout Level 4 V/10 kΩ Preout Impedance ≤ 600 Ω Speaker Impedance 4 Ω to 8 Ω General Operating Voltage 12 V DC car battery Installation Dimensions (W × H × D) Without sleeve: 178 mm × 100 mm × 162 mm With sleeve: 182 mm × 111 mm × 160 mm Weight (Main Unit) 2.
Specifications THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: 00_DDX4019BT_ENQN_ENG.
