Owner manual

10 mm

Compatible with these Kenwood double DIN devices

Kenwood Navigation

Installation Manual

Double DIN Kit

CAW 2323-03-1 (anthracite)

CAW 2323-03-2 (black)

• Porsche 911 (Type 997) 4 2008

• Porsche Boxster (Type 987)

4 2008

• Porsche Cayman (Type 987)

4 2008

Installation Manual CAW 2323-03-1 / CAW 2323-03-2

7. Place the metal frame into the

dashboard.

Adjust it vertically with 10 mm

of space to the top and bottom.

Double DIN Kit contents

• (1) Metal Frame

• (2) Installation Kit

• (3) Facia Plate

9. Push the Kenwood Navigation

into the ﬁxed metal frame until

it snaps in.

Place the facia plate.

Reinstall everything in reverse

order to ﬁnish installation.

8. Use a soldering iron to heat up

the plastic surface under the

metal hooks left and right (4 on

each side) and press them

into the heated plastic.

(see arrows)

All installation work must be performed by a qualiﬁed professional installer only.

The manufacturer / dealer is not liable for any kind of incidential or indirect damages.

10 mm

space

PAGE 1
Installation Manual Double DIN Kit Installation Manual CAW 2323-03-1 / CAW 2323-03-2 7. 10 mm space Place the metal frame into the dashboard. Adjust it vertically with 10 mm of space to the top and bottom. 10 mm 10 mm 8. Use a soldering iron to heat up the plastic surface under the metal hooks left and right (4 on each side) and press them into the heated plastic.
PAGE 2
Installation Manual CAW 2323-03-1 / CAW 2323-03-2 4. 1. Remove 2 Torx (TX25) screws (1 on each side) left and right, located at the front end of the centre tunnel. Note: Just loose the screw. Don‘t remove! There is no screw at the left side. Note: The screws are hidden in the carpet. (see photo) 2. Remove 4 Torx (TX15) screws (2 on each side) 3. Remove the side panels (ﬁxed with clips) by pulling them towards your direction. Loose one screw (head 7 mm), located at the right side of the head unit.