KR-V9090/8090 (En/T) 1 KR-V9090 KR-V8090 Preparations AUDIO VIDEO SURROUND RECEIVER INSTRUCTION MANUAL This manual contains instructions for two models. Model availability and features (functions) may differ depending on country and sales area. Operations KENWOOD CORPORATION Other Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components.
Getting started Caution : Read this page carefully to ensure safe operation. KR-V9090/8090 (En/T) 2 Before applying the power Units are designed for operation as follows. U.K. and Europe ....................................................................... AC 230 V only For the United Kingdom Preparations Factory fitted moulded mains plug 1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2.
KR-V9090/8090 (En/T) Caution : Read the pages marked Getting started carefully to ensure safe operation. 2 Before applying the power ........................................................................................... 2 Safety precautions ........................................................................................................ 2 Unpacking ......................................................................................................................
Special features KR-V9090/8090 (En/T) 4 True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! ¤ Dolby Pro Logic & Dolby 3 Stereo Preparations This surround system reproduces theater-like surround sound from video software marked .
Special features KR-V9090/8090 (En/T) New TRAITR transistor adopted in the final stage 5 How to use this manual Preparations A new TRAITR transistor which features superior temperature tracking characteristics has been adopted in the final stage of the power amplifier block.
Names and functions of parts KR-V9090/8090 (En/T) 6 Frequency display, Input display, Preset channel display, Surround mode display RDS indicators M.INPUT indicator (KR-V9090 only) SURROUND indicator Band indicators DSP indicator MEMORY indicator TA NEWS INFO. RDS EON PTY TP SP. A B A B *******;** FM AC-3 M. INPUT MEMORY AM SURROUND DSP AUTO LOUDNESS STEREO 3 STEREO kHz MHz TUNED indicator 3 STEREO indicator S.
Names and functions of parts KR-V9090/8090 (En/T) 7 1 POWER MACRO 2 TV 8 P. CALL 4 0 AUDIO VIDEO ! @ Preparations 3 SHIFT P. CALL BAND 6 4 ¢ 7 GUIDE TUNING/SKIP MUTE 6 7 8 9 # VOLUME SUBWOOFER LISTEN MODE FUNCTION SHIFT $ % ^ & * SOUND SETUP MENU THEME 1 2 FAV 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 8 9 7 Operations 5 REC DISPLAY 0 +10 ENT ‡ Use to turn the receiver on and off.
Setting up the system KR-V9090/8090 (En/T) 8 Connecting the antennas Make connections as shown below. Do not connect the power cord to a wall outlet until all connections are completed. Antenna terminal connections Preparations 2 Insert cord. 1 Push lever. 3 Return lever. AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception.
Setting up the system KR-V9090/8090 (En/T) Connecting audio components Microcomputer malfunction If operation is not possible or an erroneous display appears, even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. T 6CH input (M.INPUT) (KR-V9090 only) SYSTEM CONTROL jacks AUX.6CH.INPUT For SYSTEM CONTROL connections to KENWOOD components ! CENTER Preparations Make connections as shown below.
Setting up the system KR-V9090/8090 (En/T) 10 Connecting video components Make connections as shown below. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
Setting up the system KR-V9090/8090 (En/T) Connecting the system control 11 ƒ Mode : lets you combine f, ƒ, and F terminals terminals only This unit is compatible with both [XS8] and [SL16] modes. It comes from the factory set to the [SL16] mode. To switch to the [XS8] mode, follow the instructions in “SWITCHING FROM [SL16] TO [XS8]” below. EXAMPLE: [XS8] mode connections EXAMPLE: [SL16] mode connections The underlined portion represents the setting of the system control mode.
Setting up the system KR-V9090/8090 (En/T) 12 Connecting the speakers 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. Preparations • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly. • To emphasize deep bass sounds, connect a subwoofer as desired.
Setting up the system KR-V9090/8090 (En/T) PRE OUT connections 13 Preparations This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below. Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. Be sure to set one of the SPEAKERS keys (either A or B) to the ON position when using the PRE OUT jacks.
Preparing for surround sound KR-V9090/8090 (En/T) 14 To enhance the surround modes, various parameters can be set up to accomodate the speaker system used and the environment of the listening room. The following procedure let you set the parameters of the surround modes (DOLBY PRO LOGIC, DOLBY 3 STEREO and DSP). Once the settings have been done, it is held in memory so readjustment is not necessary even after the mode has been changed.
Preparing for surround sound KR-V9090/8090 (En/T) 4 Adjust the speaker volume. 15 1 Press to select TEST TONE. TEsT L SETUP SURROUND Initial display when the test tone is selected 1 2 3 4 5 TUNING/SKIP To increase "TEST L" "TEST C" "TEST R" "TEST RS" "TEST LS" Preparations • The buzzing test tone moves once every 1.5 seconds. 2 Adjust the level of the speaker emitting the test tone. Each speaker should produce the test tone at the same volume level as the front speakers.
Preparing for surround sound KR-V9090/8090 (En/T) 16 Preparations DSP mode setup 1 Select a DSP mode. • The following adjustments (effect level, wall type, and room size) are common for all DSP modes. If necessary these modes can be adjusted again according to your preference after listening to the surrround effect they produce. • The subwoofer, center mode and test tone adjustments made in the PRO LOGIC mode are automatically applied to the DSP modes.
Preparing for surround sound KR-V9090/8090 (En/T) 4 Adjust the ROOM size. 17 1 Press to select ROOM. SETUP R O O M ME D DSP 2 Use the TUNING/SKIP +/– keys on the remote to select the size you desire. TUNING/SKIP • The ROOM size is adjustable in 3 steps, "SML" (small), "MED" (medium) and "LRG" (large). Preparations Display when the ROOM size setting is selected 3 Press SETUP again to quit. 4 Press VIDEO once to return the remote to its original operating mode.
Normal playback KR-V9090/8090 (En/T) POWER 1 8 Preparations MACRO • Turn on the power to the related components. • Set the POWER key to the ON position. SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Normal playback KR-V9090/8090 (En/T) POWER MACRO To adjust the balance SHIFT 19 AUDIO VIDEO TV 8 % Use the test tone feature. P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Normal playback KR-V9090/8090 (En/T) POWER MACRO 20 SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Normal playback KR-V9090/8090 (En/T) POWER MACRO SHIFT 21 AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ PRO LOGIC STEREO 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Recording KR-V9090/8090 (En/T) POWER MACRO 22 SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ PRO LOGIC STEREO 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Listening to radio broadcasts KR-V9090/8090 (En/T) Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory, see the section entitled, "Using RDS". ∞ POWER MACRO SHIFT 23 AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Listening to radio broadcasts KR-V9090/8090 (En/T) POWER MACRO 24 SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ PRO LOGIC 3 STEREO STEREO DSP 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Listening to radio broadcasts KR-V9090/8090 (En/T) Using RDS (Radio Data System) 25 RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name.
Listening to radio broadcasts KR-V9090/8090 (En/T) 26 Before listening to an RDS broadcast, follow the instructions below to store the RDS stations in the preset memory. Up to 40 stations can be preset, and then receivied with the touch of a single button. This receiver uses the Radio Data System (RDS) to provide convenient tuning functions like PTY search and EON reservation. POWER MACRO SHIFT AUDIO VIDEO TV 8 P. CALL P.
Listening to radio broadcasts KR-V9090/8090 (En/T) The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. “Presetting RDS stations (RDS AUTO MEMORY)”. § POWER MACRO 27 SHIFT AUDIO VIDEO TV 8 P. CALL P.
Listening to radio broadcasts KR-V9090/8090 (En/T) 28 This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. POWER MACRO SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL AUDIO−VIDEO SURROUND RECEIVER KR-V9090 BAND 6 4 ¢ 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Listening to radio broadcasts KR-V9090/8090 (En/T) 29 3 Start the search. EXAMPLE: Searching for a Rock Music broadcast. Display while searching +10/ PTY SEARCH Blinks RDS PTY SP. A A ROCK M FM Display when a station is received. Goes out To select another program type Repeat steps 1, 2 and 3 RDS SP. A BBC 1 F M FM Station name display • No sound is heard while “PTY” is blinking.
Listening to radio broadcasts KR-V9090/8090 (En/T) 30 When the receiver is tuned to an RDS EON station (a station at which the EON indicator lights up), this function lets you set the receiver to automatically switch stations to receive news, traffic, or information programs as they are broadcast. When the broadcast is over, the receiver returns to the original station automatically. POWER MACRO SHIFT AUDIO VIDEO TV 8 P. CALL P.
Listening to radio broadcasts KR-V9090/8090 (En/T) 31 for the information you selected while 4 Wait listening to the current station. The receiver will wait for the desired information to start as long as the tuner is set to a preset RDS station that displays both the "EON" and "RDS" indicators, and the power is turned ON. When listening to the tuner: Be sure to stay tuned to stations that display both the “EON” and “RDS” indicators.
Ambience effects KR-V9090/8090 (En/T) 32 This receiver incorporates 3 different sound modes to let you enjoy surround sound with a wide variety of program sources. The Dolby Pro Logic surround sound let you enjoy theaterlike surround effects when you play Dolby Pro Logic program sources (like Laserdiscs). Dolby 3 Stereo creates a panoramic frontal sound field while keeping dialog on screen.
Ambience effects KR-V9090/8090 (En/T) DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video or LD software bearing the mark. DSP modes can be used with any source. Be sure to complete "Preparing for surround sound" before using any of these surround modes. $ POWER MACRO SHIFT 33 AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 AUDIO−VIDEO SURROUND RECEIVER KR-V9090 ¢ PRO LOGIC STEREO 7 REC GUIDE LEVEL INDICATOR STANDBY TUNING/SKIP TA/NEWS/INFO.
Ambience effects KR-V9090/8090 (En/T) 34 SOURCE DIRECT key Lets you pass the source material direct to the amplifier, bypassing any audio processing. When SOURCE DIRECT is ON, surround sound is turned off and the tone controls are bypassed. Press to switch. SOURCE DIRECT Operations LISTEN MODE key The LISTEN MODE key on the remote control lets you switch the sound mode directly from the remote control. LISTEN MODE Press to switch.
Getting the most from your remote control KR-V9090/8090 (En/T) The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Refer to "Remote operation of other components" for details about the operations available for each component.
Getting the most from your remote control KR-V9090/8090 (En/T) 36 4 Enter the setup code. MENU THEME FAV 1 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 8 9 7 • Example: Press 5258 to register a LD player made by KENWOOD. • The backlight flashes once each time a number is entered. • If an invalid setup code is entered the remote will output one long blink, disregard that code and return to the beginning of step 4. • If you push an invalid key, the remote will exit the setup mode.
Getting the most from your remote control KR-V9090/8090 (En/T) POWER MACRO 37 SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 ¢ 7 REC GUIDE TUNING/SKIP VOLUME MUTE SUBWOOFER LISTEN MODE FUNCTION SHIFT MENU SOUND SETUP THEME FAV 1 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 7 8 9 DISPLAY +10 0 Keys or controls used in this operation. ENT Operating other components This operation lets you operate the registered components.
Getting the most from your remote control KR-V9090/8090 (En/T) 38 This operation lets you change the remote control operation mode without changing the input selector. You may find this useful when you want to control one component while using another. (For example, if you want to rewind the tape deck while listening to a CD.) This operation is also useful if you don't know the which mode the remote control is set to.
Getting the most from your remote control KR-V9090/8090 (En/T) The macro play function allows you to set the remote to control several components in succession. After completing this setup, you can perform a series of operations automatically. Enter the setup codes for the components you want to control beforehand. POWER MACRO 39 SHIFT AUDIO VIDEO TV 8 P. CALL P.
Getting the most from your remote control KR-V9090/8090 (En/T) 40 3 Select where the macro should be stored. Press the VIDEO, AUDIO, or TV key to select the macro location. (MACRO1, 2, and 3 respectively) AUDIO VIDEO TV • You can store up to 3 different macros, one at each key: VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3" • The backlight flashes once when you select the macro location. • Pressing a button other than VIDEO, AUDIO, or TV cancels the macro program mode. When VIDEO is pressed SP.
Getting the most from your remote control KR-V9090/8090 (En/T) POWER MACRO 41 SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 ¢ 7 REC GUIDE TUNING/SKIP VOLUME MUTE SUBWOOFER LISTEN MODE SOUND FUNCTION SHIFT MENU SETUP THEME FAV 1 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 7 8 Keys or controls used in this operation. 9 DISPLAY +10 ENT 0 Executing an automatic operation 1 Press the MACRO key. MACRO Go to step 2 within 3 seconds. 2 Execute the macro play.
Getting the most from your remote control KR-V9090/8090 (En/T) POWER 42 MACRO SHIFT AUDIO VIDEO TV 8 P. CALL P. CALL 4 BAND 6 ¢ 7 REC GUIDE TUNING/SKIP VOLUME MUTE SUBWOOFER LISTEN MODE FUNCTION SHIFT MENU SOUND SETUP THEME FAV 1 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 7 8 9 DISPLAY +10 0 Keys or controls used in this operation. ENT Setup code correlation Deleting a setup code 1 Hold down the ENT key until the backlight flashes twice.
Getting the most from your remote control KR-V9090/8090 (En/T) FutureSet allows you to update the remote control so it can operate new components which do not appear in the setup code list at the end of the manual. This function allows you to register new setup codes for any or all of the following command positions: VIDEO1, VIDEO2, VIDEO3, TV1, TV2, CABLE, CD, TAPE/MD. FutureSet codes are stored in memory.
Getting the most from your remote control KR-V9090/8090 (En/T) 44 your remote to the speaker portion of 5 Hold your telephone. • For each setup code the operator can supply a setup code number. Should you ever need to change your input configuration, this number can be used. Please record for your future reference. If for some reason this information is lost, see "Checking a setup code" in the "Setup code correlation" section for further information.
Set up code chart KR-V9090/8090 (En/T) Non-IR codes (KR-V9090 and KR-V8090) 45 8900 Satellite 2900 DVD 6900 Cassette deck 7900 TV 1900 MD 8900 LD player 5900 VCR 4900 Phono 0900 Preparations CD player The set up codes for the remote control supplied with KR-V9090 start below. The set up codes for the remote control supplied with KR-V8090 start on page 50.
Set up code chart KR-V9090/8090 (En/T) 4 6 VCR Set up codes (KR-V9090) (continued) Maker Memorex Preparations Memphis Metz MGA MGN Technology Minolta Mitsubishi Motorola MTC Multitech Murphy NAD NEC Operations Neckermann Nesco Nikko Nikon Noblex Nokia Nordmende Oceanic Okano Olympus Optimus Orion Osaki Otto Versand Palladium Panasonic Pathe Marconi Penny Pentax Perdio Philco Philips Phonola Pilot Set up codes 4000, 4035, 4037, 4039, 4046, 4047, 4048, 4104, 4240, 4307 4072 4162, 4454 4043 4240 4042 404
Set up code chart KR-V9090/8090 (En/T) TV Set up codes (KR-V9090) Concerto Contec Craig Crown Curtis Mathes CXC Daewoo Daytron Dumont Electroband Electrohome Emerson Envision Finlux Fisher Fortress Fujitsu Funai Futuretech GE General Gibralter Goldstar Goodmans Logik Luxman LXI Magnavox Majestic Marantz Matsui Matsushita Megatron Memorex MGA Midland Minutz Mitsubishi Motorola MTC Multitech NAD NEC Nesco Nikko Noshi NTC Onwa Optimus Optonica Orion Panasonic Penny Set up codes 1282 1179, 1180 1178 1180
Set up code chart KR-V9090/8090 (En/T) 4 8 TV Set up codes (KR-V9090) (continued) Maker Tera TMK Tomashi Toshiba Totevision Set up codes 1031 1056, 1177, 1178 1282 1060, 1154, 1156 1039 Preparations Maker Triumph Universal Vector Research Victor Vidikron Vidtech Maker Viking Wards Yamaha Zenith Set up codes 1046, 1312 1016, 1019, 1021, 1027, 1030, 1054, 1056, 1165, 1178, 1179 1019, 1030 1016, 1017 Set up codes 5059 5059 5204 5194 5023, 5059 Maker Quasar Sega Sony Telefunken Theta Digital Set up co
Set up code chart KR-V9090/8090 (En/T) Cable Set up codes (KR-V9090) 49 Maker Hitachi Hytex Jasco Jerrold Set up codes 0011 0007 0153 0003, 0011, 0012, 0014, 0015, 0276, 0476 Memorex 0000 Movie Time 0063, 0156 NSC 0063, 0156 Oak 0007, 0019 Panasonic 0000, 0021, 0107 Paragon 0000 Philips 0025, 0153 Pioneer 0144, 0753 Prelude 0770 Pulsar 0000 PVP Stereo Visual Matrix 0003 Radio Shack 0797 RCA 0021 Regal 0020, 0259 Regency 0002 Rembrandt 0011 Runco 0000 Samsung 0040, 0144 Maker Scientific Atlanta Signal Si
Set up code chart KR-V9090/8090 (En/T) 5 0 Cassette deck Set up codes (KR-V9090) Preparations Maker Aiwa Arcam Carver Denon Fisher Garrard Grundig Inkel Set up codes 7029, 7197 7076 7029 7076 7074 7308, 7309 7029 7071 Maker JVC Kenwood Magnavox Marantz Onkyo Optimus Panasonic Philips Pioneer Set up codes 7244, 7273, 7274 7000, 7071, 7183 7029 7009, 7029 7136 7027, 7220 7229 7029 7027, 7220 Maker Revox Sansui Sony Teac Technics Victor Wards Yamaha Set up codes 7029 7009, 7029 7170, 7243, 7291 7308, 7
Set up code chart KR-V9090/8090 (En/T) Nordmende Oceanic Okano Orion Osaki Otto Versand Palladium Panasonic Pathe Marconi Pentax Perdio Philips Phonola Pioneer Portland Profex Profitronic Proline Pye Quartz Quelle Radiola Set up codes 4072 4041, 4046, 4048, 4104, 4106, 4240 4041, 4320, 4321, 4384 4000, 4041 4315, 4348 4004, 4209, 4348 4000, 4037, 4072 4081 4006, 4037, 4041, 4072 4162, 4226, 4227 4041 4042 4000 4081, 4384 4081 4067, 4081 4020 4322 4240 4000 4081 4046 4081 4081 Maker RCA Rex Roadstar Saba
Set up code chart KR-V9090/8090 (En/T) 52 TV Set up codes (KR-V8090) (continued) Maker Firstline Preparations Fisher Flint Formenti Frontech Fujitsu Funai GEC Geloso Genexxa GoldStar Goodmans Gorenje GPM Graetz Granada Operations Grandin Grundig Hanseatic HCM Hinari Hisawa Hitachi Huanyu Hypson ICE Imperial Indiana Ingelen Inno Hit Interfunk Intervision Isukai ITS ITT JVC Kaisui Kapsch Kathrein Kenwood Kingsley Kneissel Korpel Korting Koyoda Leyco Other Liesenk & Tter Loewe Luma Luxor Set up codes
Set up code chart KR-V9090/8090 (En/T) TV Set up codes (continued) (KR-V8090) Texet Thomson Thorn Thorn-Ferguson Tomashi Set up codes 1206, 1217, 1349 1218, 1294, 1317, 1320 1216 1109, 1287, 1343, 1349, 1399 1035, 1037, 1072, 1361, 1512 1343 1282 53 Maker Toshiba Uher Ultravox Universum Vestel Videosat Visa Vision Set up codes 1035 1206, 1320 1102 1037, 1264, 1370 1037 1247 1009, 1163 1320 Maker Set up codes Voxson 1087, 1163 Waltham 1217 Watson 1037, 1320 Watt Radio 1102 Wega 1087 White Westinghouse
Set up code chart KR-V9090/8090 (En/T) 5 4 CD Player Set up codes (KR-V8090) Preparations Maker Akai Alba Amstrad Arcam AudioTon Bush California Audio Lab Condor Cyrus Denon Fisher Grundig JVC Kenwood Set up codes 8156 8603, 8615 8603 8157 8157 8615 8029 8134 8157 8003, 8034 8048 8157 8072 8028, 8099, 8190, 8523, 8692, 8826 Maker Linn Luxman Marantz Matsui MCS Memorex Meridian Micromega Mitsubishi NAD Naim Onkyo Panasonic Philips Pioneer Set up codes 8157 8589, 8778 8029, 8157 8157, 8288 8029 8032 815
In case of difficulty KR-V9090/8090 (En/T) Resetting the Microcomputer With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press POWER. If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition.
In case of difficulty KR-V9090/8090 (En/T) 5 6 Remote control unit Symptom Cause Remedy Preparations The backlight flashes five times during normal operation. • The batteries are nearing exhaustion. • Replace with new batteries to preserve the currently registered setup information.# Subwoofer volume cannot be adjusted. • Subwoofer is OFF. • Turn the subwoofer ON. Certain inputs cannot be selected using the remote control. • No preset codes registered at for the respective input(s).
Specifications Caution : Read this page carefully to ensure safe operation. KR-V9090/8090 (En/T) FM tuner section Rated power output during STEREO operation (KR-V9090) (DIN) 1 kHz, 0.7% at 4 Ω ............................. 120 W + 120 W (IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4 Ω ......... 120 W + 120 W (KR-V8090) (DIN) 1 kHz, 0.7% at 4 Ω ............................. 110 W + 110 W (IEC) 63 Hz ~ 12.5 kHz, 0.7% at 4 Ω ......... 110 W + 110 W Rated power output during SURROUND operation (KR-V9090) FRONT(1kHz, 0.
Remote operation of other components KR-V9090/8090 (En/T) 58 Refer to the following for the type of remote control operations available for each component. The setup code for each component must be entered beforehand. • When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key. • Numeric keys function the same as the numeric keys on the original remote.
Remote operation of other components KR-V9090/8090 (En/T) TV operations P. CALL BAND 4 6 ¢ 1 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 7 8 9 DISPLAY 7 + (Channel +) – (Channel –) +10 6 (Mute) 8 (Volume +) 7 (Volume –) 0 P. CALL 2 3 TV/SAT/VID INFO ALT AUD 4 5 6 +100 REPEAT RANDOM 8 9 7 DISPLAY Numeric keys 8 0 FUNCTION SHIFT commands TV/SAT./VID (Input selector) ALT AUDIO (Alternate audio) +100 (TV TEXT) REPEAT (Text off) RANDOM (MIX) P.
Remote operation of other components KR-V9090/8090 (En/T) 60 Cable tuner operations FUNCTION SHIFT MENU TUNING/SKIP P. CALL 8 P. CALL BAND 4 6 ¢ THEME FAV MENU THEME 1 2 3 1 2 3 TV/SAT/VID INFO ALT AUD TV/SAT/VID INFO ALT AUD 4 5 6 4 5 6 +100 REPEAT RANDOM +100 REPEAT RANDOM 7 8 9 7 8 9 DISPLAY 7 Preparations + (Channel +) – (Channel –) 6 8 7 4 ¢ +10 0 DVD player operations TUNING/SKIP P. CALL 8 6 FUNCTION SHIFT commands MENU (Menu) THEME (Theme) FAV.