Owner's manual

7
English
Using the core filter
To reduce interference, be sure to attach the provided core filters to the
power cord and the external component cord.
Run the cable through the core filter, and wind it firmly once inside.
Close the core filter until it clicks shut. (You can wind the cords
together.)
¤ CAUTION
Do not damage the cord by applying expressive force when winding.
Connecting the TV — viewing the
video/picture from iPod on your TV
You can view a video/picture from iPod connected to the unit on your
TV. Connect the video input terminal on your TV, etc. to the VIDEO OUT
terminal with the video cord (not supplied).
DC power cord (to DC IN jack)
Digital coaxial cord (to DIGITAL IN 2 terminal)
Audio cord (to ANALOG IN terminal)
Composite video cord
(to VIDEO OUT terminal)
RCA pin plug cord (to SUBWOOFER PRE-OUT terminal)
Core filter (large)
Core filter (small)
Core filter (small)
Setting the video output
While the source is selected to IPOD and iPod is not connected to the
unit...
Press and hold iPod 6 (main unit).
Each time you press and hold the button, VIDEO OFF and VIDEO ON
scroll on the display.
VIDEO OFF : The video/picture from iPod is shown on iPod itself.
VIDEO ON : The video/picture from iPod is shown on the TV.
Connecting external components
You can connect an analog component to the ANALOG IN terminal
and digital components to the (OPTICAL) DIGITAL IN 1 and (COAXIAL)
DIGITAL IN 2 terminals.
You can also connect a subwoofer to the SUBWOOFER PRE-OUT
terminal.
(COAXIAL)
*
2
Make the setting on TV, DVD player, etc.to output the Linear PCM signal.
Rear of the unit
TV, etc. (not supplied)
Composite video
cord (not supplied)
Rear of the unit
RCA pin plug
cord (not
supplied)
WhiteRed
Digital
optical cord
(supplied)
DVD Player, etc.
(not supplied)
TV, etc. (not supplied)
Digital coaxial
cord (not
supplied)
Subwoofer
(not supplied)
RCA pin plug
cord (not
supplied)
EN_C-BX3[E]f.indd 7EN_C-BX3[E]f.indd 7 7/4/12 9:44:42 AM7/4/12 9:44:42 AM