Compact Stereo System M-918DAB OPERATING MANUAL JVCKENWOOD Corporation ENGLISH
Before initial operation Contents Before switching on the power supply Safety instructions 3 3 Before initial operation Connecting Handling CDs Useful information about USB-devices Component names and functions Basic functions Turning on the system Switch off in standby Volume control Adjusting the sound 6 6 7 7 8 9 9 9 9 9 Using CD and USB Preparation Playback of CD or audio files (USB, CD) Selecting a folder (only audio files) Programming tracks and files - Procedure with audio CD - Procedure with aud
Before switching on the power supply IMPORTANT SAFETY INSTRUCTIONS Attention: Please read through this sheet carefully in order to ensure safe operation of the device. Read notes carefully! - Please comply with all safety and operation instructions when you put this product into operation. Keep these instructions in a safe place! – Please keep the safety and operating instructions for later reference.
10. Service – Never attempt to service this device yourself since if covers are opened or removed, live parts may be exposed, touching which can be a source of risk. Please refer all servicing to qualified customer service personnel. 11. Damage which requires repair – Service and repair work should only be carried out by qualified customer service department. Service/repair is required if the device is damaged (e.g.
EU Declaration of Conformity The JVCKENWOOD Corporation hereby declares that the radio equipment type M-918DAB is in compliance with the 2014/53/EU guidelines. The complete text of the EU Declaration of Conformity is available under the following internet address: http://www.kenwood.com/cs/eudoc/ Manufacturer: JVCKENWOOD Corporation 3-12. Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN Agent (EU): JVCKENWOOD EUROPE B.V.
First use When you use the device for the first time, an automatic DAB+ station scan is started. Please wait until this procedure has completely finished. For further information on this, please refer to the “Using the DAB+ radio” section. Handling CDs Precautions when handling Hold the CD in such a way that you are not touching the signal surface. (The side without printing is the playing side) Precautions regarding CDs Only use CDs with the mark.
Troubleshooting In the event of malfunctions, please check the following points: No sound Insert the mains plug in properly. Adjust the volume to the correct level. Make sure that the correct source is selected. Left and right channel mixed up Check the speaker connection and their locations. The system is not responding to button pressing Remove the mains plug and connect it again. Problems with radio reception Readjust the antenna. Look for a more suitable location.
M-918DAB technical specifications Power supply AC voltage 100 – 240 V 50/60 Hz Power consumption 40 Watt Power consumption in standby mode < 0.5 Watt CD operation Signal to Noise Ratio (A-Filter) ≥ 70 dB Dynamic Range ≥ 60 dB Tuner FM/DAB+ DAB Tuning Range BAND III 174.928 MHz – 239.200 MHz FM Tuning Range 87.50 MHz – 108.00 MHz BLUETOOTH BLUETOOTH Version V4.2 +EDR Performance Class Class 2 Transmission Power 4dbm Range approx.
Warranty Dear Customer, We would like to thank you for purchasing this Kenwood product. If this product is found to be defective in material or workmanship under normal operating conditions, in accordance with the provisions of the following warranty, we will rectify these faults free of charge or replace the device. Please retain this warranty card in a safe place.