User's Manual

Use guidelines

TRMS-200-11002

TRMS-200 is an additional product for the refrigeration truck, consists of the

receiver and the antenna shelf. It can process and send the door opened/closed state

and fuel signal to the control panel, the corresponding state will show in this control

panel in order to real time view those states for the user.

TRMS-200 has a LED and two plugs, LED indicates the working condition, the

black small plug use to learn the special code, the other plug is an interface for

outputting and controlling the signal.

Firstly, find a suitable position at the top of refrigeration truck and fixe the

antenna protective rubber by the standard configuration screw, then fixed and

rationalized the antenna wire. Ensure when the refrigeration truck is running, other

objects can not touch the antenna shelf or the antenna wire. Specifically see the

following figure.

After set up the receiver:

A) Plug in the host of the receiver, take the black plug out and then plug it in

again, the LED of host will flash(aways) the green light and the TRMS-200

will get into the learning mode, then the fuel transmitter will send a paired

code to the TRMS-200 in one minute, TRMS-200 will flash the orange light

when it received, and save the ID of the fuel transmitter. The receiver will

PAGE 1
Use guidelines TRMS-200-11002 TRMS-200 is an additional product for the refrigeration truck, consists of the receiver and the antenna shelf. It can process and send the door opened/closed state and fuel signal to the control panel, the corresponding state will show in this control panel in order to real time view those states for the user.
PAGE 2
receive and show the corresponding value when the fuel transmitter send the TRMS-RFS-FS006 signal in the extent permitted. B) Secondly, the red LED of the receiver will flash when the receiver receive the signal from the door status detector, it will flash once when the first door opened, flash twice when the second door opened, and so on.