Setting Clock Time Enter the programming mode. Press button #4 repeatedly unt the B8:88 icon begins to flash. Press bunion #1 to select and enter clack setting mode. Press button #1 fa scroll through ‘hour’. ‘minute’, "om/pm’ settings. The selected item will be flashing. Crass button #2 to adjust the setting of the selected item. Press button #4 fo save settling and exit, or press bunion #3 to abort. am oon Setting Alarm Clock . I. Enter the programming mode.
Standard Features 2-Way FM Transceiver Alphanumeric LCD display with cockfight Utters tow power drain MCM Built-in Analog Devices ADXL202 accelerator ignition protection Range Confirmation Signal (RCS) Remote sensor control Battery safeguard with “sleep mode” Clock magician Violation display with dime stamp Passive forming delectable among / disarming Automatic reset Hashing lights with memory display Long range paging transmitter Programmable multi-fone siren Electable siren duration Arriving confirmation
Programming instructions There are two types of programming mode; 1} Programming the Transceiver To program the transceiver the MCM does not hove fo be installed or be within range. The programmable modes for the Transceiver ore: + Transceiver Alert Type {Audible/Silent Vibrate}. + Alma Clock. + Clock. 2) Programming ihe Tomcat program the MCM the system mus! be installed, with in range, and In the disarmed mode. The programmable modes for the MCM are: + Auto/Manual Arming. + Siren Tones and Siren Duration.
Routing the Antenna Wire The MCM includes an 18" antenna wire. The first 127 is o comical wire; the remaining 67 Is the acidic antenna wire. When roughing, fry to avoid running the antenna along or near metal, For bast performance, Try to have at least a portion of the antenna wire exposed. Wire Connections The MCM is equipped with two connectors. One is for the main shames [HEIR-1} and the other is for the optional accessories.
Sensor Memory Display 1. When the system is disarmed the tum signals will fish to indicate if there has been an lama digger. The fights will flash once to indicate that the system has been disarmed, additional flashes indicate tho the following trigger has occurred: 1 flash then 1 additional fish = Shock Rigger 1 fish then 2 additional flashes = Tilt Rigger 1 flash then 3 addition flashes = Perimeter Sensor Rigger 1 fish then 5 additional flashes = ignition Trigger RCS (Range Confirmation Signal) 1.
Operating Instructions Arm 1. Press button #1, siren chirps 3 times and the tum signal lights flash 1 time. 2. The Transceiver echoes 3 chirps and the LCD displays a ana Icons. Disarm 1. Press button #2, siren chirps 1 time ond lights flesh 1 dime. 2. The Transceiver echoes 1 chirp and the LCD displays = icon. Arming Without Perimeter Sensor (optional) 1. Press button #3, siren chirps 4 times and tum signal lights flash 1 Hume. 2. The Transceiver echoes 4 chirps and the LCD splashy Van Fo con, 3.