User Guide
DS-1280ZJ-DM21
Wall Mounting Bracket for
Dome Camera
Features:
Aluminum alloy material with surface spray
treatment
Waterproof design
Dimension:
Order Model:
DS-1280ZJ-DM21
Parameter:
Model
Parameters
DS-1280ZJ-DM21
Wall Mounting Bracket for
Dome Camera
Appearance
Hikvision White
Material
Aluminum Alloy
Dimension
Φ137×42mm
Weight
250g
Notice:
The bracket should be installed on flat wall
Waterproof rubber is necessary for outdoor application
The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
Installation Step:
① Choose the appropriate
wall to install the bracket
and thread the cable
② Separate basement
and dome of camera
③ Fix the basement of
camera to bracket and
thread the cable
④ Adjust the angle of view, fix
the lower case, and complete
the installation
Note: The actual dome camera may vary from the picture above.
n 137
162
42
n 116
83.5
46
46
83.5
7-M4 D10