User Guide

DS-1275ZJ
Vertical Pole Mount Bracket
Features:
 For pole mounting
 The clasp is made of stainless steel
 Mounting board is made of aluminum die-casting alloy
Dimension:
Order Model:
DS-1275ZJ
Parameter:
Model
Parameter
DS-1275ZJ
Vertical Pole Mount Bracket
Appearance
Hikvision White
Range of
Application
It can be used with some wall mount bracket
Diameter of clamp: Φ67mm-127mm
Material
Aluminum Alloy Q195
Dimension
127×46×250mm
Weight
1345g
Notice:
 The site of screw hole should be noticed when using with
wall mount bracket
 Load capacity of pole should be more than 3 times the
weight of camera and bracket
 Load capacity of clamp is 10KG
Installation Step:
① Contrarotate the rotary knob ② Thread the clamp through the hole ③ Clasp the clamp around the pole and rotate
and open the clamp of mounting board the rotary knob clockwise for tightening
A: Rotary knob
This bracket can be used with some wall mount bracket to realize vertical pole mount, which is as followed:
Note: The actual bracket may vary from the picture above.
A
A