User Guide

DS-1273ZJ-160B
Wall Mounting Bracket for Dome Camera
(With junction box)
Features:
 Aluminum alloy material with surface spray
treatment
 Design with cable entry hole
 Better water proof design
 Convenient installation coordinating with cap
Dimension:
Order Model:
DS-1273ZJ-160B
Parameter:
Model
Parameters
DS-1273ZJ-160B
Wall Mounting Bracket for
Dome Camera(with junction box)
Appearance
Hikvision White
Range of
Application
Suitable for dome camera wall mounting
Material
Aluminum Alloy
Dimension
Φ160×243×303mm
Weight
1630g
Notice:
 The bracket is for dome camera
 Pay attention to color matching
 The bracket should be installed on flat wall
 The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
 The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CD72XXF-E(I)Z(H)(S),DS-2CD72X3PF-E(I)Z(H)(S),DS-2CD72X3NF-E(I)Z(H)(S),DS-2CD7293PFWD-E(I)Z(H)(S),DS-2CD7293NFWD-
E(I)Z(H)(S),DS-2CD72X4FWD-E(I)Z(H)(S),DS-2CD4312F(WD)-(I)(Z)(H)(S),DS-2CD4324F-(I)(Z)(H)(S),DS-2CD4332FWD-(I)(Z)(H)(S)
Installation Step:
① Choose the appropriate
wall to fix the junction
box
② Wiring through
waterproof stopper
③ Install bracket to junction box;
wiring and screw up
④ Fix cap to bracket and fix
with fastening screw;
wiring
A: Fastening screw
⑤ Take off the lower dome
and inner module
⑥ Complete wiring and
fix inner module to cap
⑦ Adjust the view angle; install
lower dome and screw up
⑧ Installation Complete
Note: The actual bracket may vary from the picture above.
3-M4深8
303
220
209
85.7
123
243
φ160
φ139
4-φ9
Unit：mm