You should have received the following parts in the package. Please ensure that all parts are accounted for.
RIPPLE INDOOR FLOOR FOUNTAIN Care and Instruction Manual
51028BL ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1028BL ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. SUGGESTED TOOLS NOT SUPPLIED PHILLIPS SCREWDRIVER More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. We recommend using this fountain against a wall. When assembling ensure that all parts are firmly tightened.
51028BL ASSEMBLY INSTRUCTIONS Unscrew 2 x M and 2 x L from basin (A). Place pump (E) into basin (A), run pump cord through notch in back of the basin (A). Use 2 x L and 2 x M to secure the lower fountain body (B) to basin (A). B E M L A A Feed rubber hose down through the center hole. Loosen 2 x N. Insert pins into holes, tighten 2 x N.
51028BL ASSEMBLY INSTRUCTIONS Secure light assembly (F) to upper fountain body (C) with 2 x O. F O C Water flow control valve Loosen two screws, install LED bulb to socket and tighten the screws.
51028BL ASSEMBLY INSTRUCTIONS Attach the pump (E) to the rubber hose. Rubber hose E FINAL STEPS Fill the basin (D) with distilled water between the fill lines. Place pump access door (D) into basin (A). Place decorative river stones (I) onto pump access door (D). Connect the light connectors (F) and (G) together. 7 Plug light transformer (G) and pump (E) into outlets and turn light on at switch. Use shims (H) to level the fountain. Use water guiding pad (J) to brush the fountain face.
51028BL ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Front cover Filter sponge Back cover Pump housing Regulator Suction cup If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
51028BL ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. • To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
51028BL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51028BL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51028BL ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.
www.kenroyhome.