Manual

Cable Cove

Assembly Instructions

Step 1

Remove all contents from the box and make sure all of the

following parts are accounted for.

Box Contents

2 Vertical Rails

2 Base Plates

2 Upper Channels

24 Bolts

24 Washers

24 Nuts

Tools Required

5/16 Wrench

Step 2

Place each bolt into the washer, insert into assembly hole

and attach with nut. Keep all bolts finger tight until the

entire frame is assembled.

Step 3

Tighten all bolts.

PAGE 1
Cable Cove Assembly Instructions Step 1 Remove all contents from the box and make sure all of the following parts are accounted for. Box Contents 2 Vertical Rails 2 Base Plates 2 Upper Channels 24 Bolts 24 Washers 24 Nuts Tools Required 5/16 Wrench Step 2 Place each bolt into the washer, insert into assembly hole and attach with nut. Keep all bolts finger tight until the entire frame is assembled. Step 3 Tighten all bolts.
PAGE 2
Limited Warranty General: Under certain circumstances we offer with our products the following One Year Warranty against Defects in Material and Workmanship. Please read your Warranty carefully. This Warranty sets forth our responsibilities in the unlikely event of defect and tells you how to obtain performance under this Warranty.