Datasheet

ManualsBrandsKEMET ManualsCapacitorsRadial Film Capacitor 150nF 20% 480VAC

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3087_P278_X1_480 • 2/20/2019

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

Benets

• Approvals: ENEC, UL, cUL

• Rated voltage: 480 VAC 50/60 Hz

• Capacitance range: 0.001 – 0.15 µF

• Lead Spacing: 10.2 – 25.4 mm

• Capacitance tolerance: ±20%

• Climatic category: 40/110/56, IEC 60068–1

• Tape & Reel in accordance with IEC 60286–2

• RoHS compliance and lead-free terminations

• Operatingtemperaturerangeof−40°Cto+110°C

• 100% screening factory test at 2,700 VDC

• Highest possible safety regarding active

andpassiveammability

• Excellent self-healing properties that ensure long life,

even when subjected to frequent over-voltages

• Good resistance to ionization due to impregnated paper dielectric

• Impregnated paper that ensures excellent stability and reliability

properties, particularly in applications that operate continuously

Overview

Multilayer metallized paper encapsulated and impregnated

in self-extinguishing material that meets the requirements

of UL 94 V–0.

Applications

Typical applications include worldwide use as an

electromagnetic interference suppressor in all X1 and

across-the-line applications.

AC Line EMI Suppression and RC Networks

P278, Metallized Impregnated Paper,

Class X1, 480 VAC

Part Number System

P 278 H E 102 M 480 A

Capacitor Class Series

Lead Spacing

(mm)

Size Code

Capacitance

Code (pF)

Capacitance

Tolerance

Rated Voltage

(VAC)

Packaging

P = Paper X1, Metallized

Paper

H = 10.2

Q = 15.2

C = 20.3

S = 22.5

E = 25.4

See Dimension

Table

First two digits

represent

signicant

gures.Third

digitspecies

number of

zeros.

M = ±20% 480 = 480 See Ordering

Options Table

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (13 pages)

PAGE 1
AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Overview Applications Multilayer metallized paper encapsulated and impregnated in self-extinguishing material that meets the requirements of UL 94 V–0. Typical applications include worldwide use as an electromagnetic interference suppressor in all X1 and across-the-line applications. Benefits • • • • • • • • • • • Approvals: ENEC, UL, cUL Rated voltage: 480 VAC 50/60 Hz Capacitance range: 0.001 – 0.
PAGE 2
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Part Number (Insert at 14th character) Standard Lead and Packaging Options 10.2 Bulk – Short Leads 6 +0/−1 C Bulk – Maximum Length Leads 30 +5/−0 A H0= 18.5 ±0.5 L H0= 18.5 ±0.5 XLAF1 H0= 18.5 ±0.
PAGE 3
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Dimensions – Millimeters FRONT VIEW SIDE VIEW L B H d LL b p p B H L d b Size Code Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Tolerance HE HH HL QE QJ QS CE CJ CP SJ SP SU EJ EL 10.2 10.2 10.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 25.4 25.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 3.
PAGE 4
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals 480 VAC 50/60Hz 0.001 – 0.15 µF ±20% −40°C to +110°C 40/110/56/B ENEC, UL, cUL Maximum Values at +23°C Dissipation Factor Test Voltage Between Terminals 1 kHz The 100% screening factory test is carried out at 2,700 VDC.
PAGE 5
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Approvals Certification Body Mark Specification File Number Intertek Semko AB EN/IEC 60384–14 SE/0140–35A UL UL 60384–14 CAN/CSA-E60384–14–09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS compliant. Table 1 – Ratings & Part Number Reference Capacitance Value (µF) Maximum Dimensions in mm B H L Lead Spacing (p) fo (MHz) dV/dt (V/µs) KEMET Part Number 0.001 0.
PAGE 6
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Soldering Process The implementation of the RoHS Directive has required the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from 183 °C for SnPb eutectic alloys to 217 – 221 °C for the new alloys.
PAGE 7
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process.
PAGE 8
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Construction Detailed Cross Section Metallized Impregnated Paper (First Layer) Self-Extinguishing Resin Self-Extinguishing Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Margin Leads Metal Contact Layer Winding Scheme Metal Spraying Material Metallization Metal Spraying Material Impregnated Paper Impregnated Paper Single Design — Multilayer Impregn
PAGE 9
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Marking FRONT KEMET Logo Series IEC Climatic Category BACK Voltage Self Healing Approval Mark Approval Mark Manufacturing Date Code TOP Capacitance © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 10
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel 360 mm Large Reel 500 mm Ammo Formed 7.5 8.2 10.5 13.5 13.5 13.5 2,000 2,000 1,600 1,000 1,000 800 700 600 600 1,400 10.2 3.9 4.1 5.1 800 780 630 5.5 6.5 7.5 8.5 5.2 5.5 6.0 7.3 7.8 8.5 12.5 12.5 14.5 16.0 10.5 11.1 12.5 13.0 13.5 14.3 18.0 18.0 18.0 18.
PAGE 11
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Lead Taping & Packaging (IEC 60286–2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 – 27.5 mm Lead Spacing 10 – 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead Spacing +6/−0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F ±0.5 W 18 18 18 18 18 18 18 18 +1/−0.
PAGE 12
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC Lead Taping & Packaging (IEC 60286–2) cont'd Ammo Specifications Dimensions (mm) Series P278 H W T 330 330 50 H Reel Specifications T W Dimensions (mm) Series P278 D H W 360 500 30 46 (Max) D H Manufacturing Date Code (IEC–60062) W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R
PAGE 13
Film Capacitors – AC Line EMI Suppression and RC Networks P278, Metallized Impregnated Paper, Class X1, 480 VAC KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales oﬃces, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.