Datasheet
1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9014_L-DMI • 4/17/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Unique green sheet and printing technologies
• High reliability
• High current
• Low DCR
• Lowprole1.2mmmaximum
Chip Inductors
High Current Multilayer Chip Power Inductor L-DMI
Part Number System
L 0603 C 1R0 M DMI T
Inductor
EIA Case Size
(L"xW")
Specication
Inductance
Value(µH)
Inductance
Tolerance
Series Packaging
0603(1608inmm)
0805(2012inmm)
0806(2016inmm)
1008(2520inmm)
C = Commercial
L=0.8mmmaximumheight
S = High saturation type
Q=1.2mmmaximumheight
R = decimal point
Examples:
R47 = 0.47 µH
1R0 = 1.0 µH
M = ±20% DMI = High current
multilayer chip type
T = Tape & Reel
Overview
KEMET L-DMI ferrite-based Multilayer Chip Power
Inductors are ideal for use in DC to DC switching power
supplies. The small size of this chip inductor makes it
suitable for mobile equipement that requires tight space
both in dimension and in height. The internal printed coil
structure creates a closed magnetic circuit, which acts as
a magnetic shield eliminating crosstalk, thus permitting
higher mounting densities. The multilayer block structure
yields higher reliability. In addition, the inductor shows
excellentlowDCpowerdissipation,duetolowRdcwith
a high aspect ratio internal conductor that stands on
unique green sheet and printing technologies.
Applications
• Switching DC-DC power supplies
• Wearables
• Smartphone
• Tablet device
• Digital still camera
• HDD