Datasheet

ManualsBrandsKEMET ManualsFerritesSplit Ferrite Core 25.4x2.6mm 200Ohm @ 300MHz

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard E5007_ESD-FPD • 9/17/2018

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

One world. One KEMET

EMI Cores

ESD-FPD Series Split Cores with Metal Clamp

for Flat Cables for High Frequency (Bare)

Benets

• NiZn≤300MHz(FMbandrange)optionsavailable

• Split construction

• Easytoinstallthroughitsclampmecanism

• Quicksolutionforpost-cableassemblynoiseissue

• Stainless steel clamp

Overview

TheKEMETESD-FPDSeriessplitcoresaredesignedfor

useonatcable.AwiderangeofNickelZinc(NiZn)options

allowfortargetingofspecichighfrequencyranges.Each

product features two core parts and two stainless steel

clamps.

EMI cores are part of a family of passive components which

addresstheissuesofnoiseorelectromagneticinterference

(EMI)incircuitsorsystems.

Applications

• Oceequipment

• Homeappliances

• Inkjet printers

• Consumer electronics

• Industrialequipment

• Testandmeasurementequipment

• Medicalequipment

• Audio-visualequipment

Part Number System

ESD- FPD- 16

Series Form Type ApplicableCable Clamp Type

ESD- Split

xx = xx Core Blank = Stainless steel clamp

Each part number includes two ferrite parts and two clamps, as shown in the picture.

Summary of content (7 pages)

PAGE 1
EMI Cores ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Overview Applications The KEMET ESD-FPD Series split cores are designed for use on flat cable. A wide range of Nickel Zinc (NiZn) options allow for targeting of specific high frequency ranges. Each product features two core parts and two stainless steel clamps.
PAGE 2
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Core Material and Effective Frequency Range There are two ferrite material options for KEMET EMI Cores: Nickel-Zinc (NiZn) and Manganese Zinc (MnZn). Each core material has a different resistance and effective frequency range. The MnZn core material has a lower resistance compared to the NiZn; therefore, adequate insulation is required before use.
PAGE 3
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band.
PAGE 4
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Installation Example Performance Characteristics Item Performance Characteristics Operating temperature Frequency range Outer length Outer width Inner length Inner width Thickness Type Material −25°C to +85°C High frequency 37.0 – 80.0 mm 10.0 mm 25.4 – 68.6 mm 2.0 – 2.6 mm 12.
PAGE 5
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Impedance vs. Frequency Packaging Part Number ESD-FPD-16 ESD-FPD-34 ESD-FPD-40 ESD-FPD-50 Packaging Type Tray © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.
PAGE 6
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) Handling Precautions EMI Cores should be stored in normal working environments. While the EMI Cores themselves are quite robust in other environments, avoid exposure to high temperatures, high humidity, corrosive atmospheres and long term storage for case, snap-on and split types. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 75% relative humidity.
PAGE 7
EMI Core – ESD-FPD Series Split Cores with Metal Clamp for Flat Cables for High Frequency (Bare) KEMET Electronics Corporation Sales Oﬃces For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change.